Epson AcuLaser C1100D User Manual

							Working with Fonts271
C
C
C
C
C
C
C
C
C
C
C
C
Print sample
EPSON UPC-A
❏UPC-A is the standard bar code specified by the American 
Universal Product Code (UPC Symbol Specification Manual).
❏Only regular UPC codes are supported. Supplementary codes 
are not supported.
The following codes are inserted automatically and need not be 
input by hand:
❏Left/Right margin
❏Left/Right guard bar
❏Center bar
❏Check digit
❏OCR-B
EPSON EAN-13
Character type Numbers (0 to 9)
Number of characters 11 characters
Font size 60 pt to 150 pt (up to 96 pt in Windows XP, 
2000, and NT). Recommended sizes are 60 
pt, 75 pt (standard), 112.5 pt and 150 pt.
 
						

							272Working with Fonts Print sample
EPSON UPC-E
❏UPC-E is the UPC-A zero-suppression (deletes extra zeros) 
bar code specified by the American Universal Product Code 
(UPC Symbol Specification Manual).
The following codes are inserted automatically and need not be 
input by hand:
❏Left/Right margin
❏Left/Right guard bar
❏Check digit
❏OCR-B
❏The numeral “0”
EPSON UPC-A
Character type Numbers (0 to 9)
Number of characters 6 characters
Font size 60 pt to 150 pt (up to 96 pt in Windows XP, 
2000, and NT). Recommended sizes are 60 
pt, 75 pt (standard), 112.5 pt, and 150 pt.
 
						

							Working with Fonts273
C
C
C
C
C
C
C
C
C
C
C
C
Print sample
EPSON Code39
❏Four Code39 fonts are available, allowing you to enable and 
disable the automatic insertion of check digits and OCR-B.
❏The height of the bar code is automatically adjusted to 15% or 
more of its total length, in conformance to the Code39 
standard. For this reason, it is important to keep at least one 
space between the bar code and the surrounding text to 
prevent overlapping.
❏Spaces in Code39 bar codes should be input as “_” underbars.
❏When printing two or more bar codes on one line, separate 
the bar codes with a tab, or select a font other than a BarCode 
Font and input the space. If a space is input while a Code39 
font is selected, the bar code will not be correct.
EPSON UPC-E
Character type Alphanumeric characters (A to Z, 0 to 9) 
Symbols (- . space $ / + %)
Number of characters No limit
 
						

							274Working with Fonts The following codes are inserted automatically and need not be 
input by hand:
❏Left/Right quiet zone
❏Check digit
❏Start/Stop character
Print sample
Font  size When OCR-B is not used: 26 pt or more (up 
to 96 pt in Windows XP, 2000, and NT).
Recommended sizes are 26 pt, 52 pt, 78 pt, 
and 104 pt.
When OCR-B is used: 36 pt or more (up to 
96 pt in Windows XP, 2000, and NT).
Recommended sizes are 36 pt, 72 pt, 108 
pt, and 144 pt.
EPSON Code39 EPSON Code39 CD
EPSON Code39 Num EPSON Code39 CD Num
 
						

							Working with Fonts275
C
C
C
C
C
C
C
C
C
C
C
C
EPSON Code128
❏Code128 fonts support code sets A, B, and C. When the code 
set of a line of characters is changed in the middle of the line, 
a conversion code is automatically inserted.
❏The height of the bar code is automatically adjusted to 15% or 
more of its total length, in conformance to the Code128 
standard. For this reason, it is important to keep at least one 
space between the bar code and the surrounding text to 
prevent overlapping.
❏Some applications automatically delete the spaces at the end 
of lines or change multiple spaces into tabs. Bar codes 
containing spaces may not be correctly printed from 
applications that automatically delete spaces from the ends of 
lines or change multiple spaces into tabs.
❏When printing two or more bar codes on one line, separate 
the bar codes with a tab, or select a font other than a BarCode 
Font and input the space. If a space is input while Code128 is 
selected, the bar code will not be correct.
The following codes are inserted automatically and need not be 
input by hand:
❏Left/Right quiet zone
❏Start/Stop character
❏Check digit
❏Change code set character
Character type All ASCII characters (95 in total)
Number of characters No limit
Font size 26 pt to 104 pt (up to 96 pt in Windows XP, 
2000, NT). Recommended sizes are 26 pt, 
52 pt, 78 pt, and 104 pt.
 
						

							276Working with Fonts Print sample
EPSON ITF
❏The EPSON ITF fonts conform to the USS Interleaved 2-of-5 
standard (American).
❏Four EPSON ITF fonts are available, allowing you to enable 
and disable the automatic insertion of check digits and OCR-B.
❏The height of the bar code is automatically adjusted to 15% or 
more of its total length, in conformance to the Interleaved 
2-of-5 standard. For this reason, it is important to keep at least 
one space between the bar code and the surrounding text to 
prevent overlapping.
❏Interleaved 2 of 5 treats every two characters as one set. When 
there are an odd number of characters, EPSON ITF fonts 
automatically add a zero to the beginning of the character 
string.
EPSON Code128
Character type Numbers (0 to 9)
Number of characters No limit
Font  size When OCR-B is not used: 26 pt or more (up 
to 96 pt in Windows XP, 2000, and NT).
Recommended sizes are 26 pt, 52 pt, 78 
pt, and 104 pt.
When OCR-B is used: 36 pt or more (up to 
96 pt in Windows XP, 2000, and NT).
Recommended sizes are 36 pt, 72 pt, 108 
pt, and 144 pt.
 
						

							Working with Fonts277
C
C
C
C
C
C
C
C
C
C
C
C
The following codes are inserted automatically and need not be 
input by hand:
❏Left/Right quiet zone
❏Start/Stop character
❏Check digit
❏The numeral “0” (added to the beginning of character strings 
as needed)
Print sample
EPSON ITF EPSON ITF CD
EPSON ITF Num EPSON ITF CD Num
 
						

							278Working with Fonts
EPSON Codabar
❏Four Codabar fonts are available, allowing you to enable and 
disable the automatic insertion of check digits and OCR-B.
❏The height of the bar code is automatically adjusted to 15% or 
more of its total length, in conformance to the Codabar 
standard. For this reason, it is important to keep at least one 
space between the bar code and the surrounding text to 
prevent overlapping. 
❏When either a Start or a Stop character is input, Codabar fonts 
automatically insert the complementary character.
❏If neither a Start nor a Stop character is input, these characters 
are automatically input as the letter “A.”
The following codes are inserted automatically and need not be 
input by hand:
❏Left/Right quiet zone
❏Start/Stop character (when not input)
❏Check digit
Character type Numbers (0 to 9)
Symbols (- $ : / . +)
Number of characters No limit
Font  size When OCR-B is not used: 26 pt or more (up 
to 96 pt in Windows XP, 2000, and NT).
Recommended sizes are 26 pt, 52 pt, 78 
pt, and 104 pt.
When OCR-B is used: 36 pt or more (up to 
96 pt in Windows XP, 2000, and NT).
Recommended sizes are 36 pt, 72 pt, 108 
pt, and 144 pt.
 
						

							Working with Fonts279
C
C
C
C
C
C
C
C
C
C
C
C
Print sample
EPSON Codabar EPSON Codabar CD
EPSON Codabar Num EPSON Codabar CD Num
 
						

							280Notice for Windows XP Users
Notice for Windows XP Users
To use this product on the computer running Windows XP Service 
Pack 2, follow the steps below to change the settings in Windows 
Firewall.
Note:
If you register programs to Windows Firewall as exceptions, ports used 
by the programs are open to incoming communications from an external 
network. Each time that you allow an exception for a program to 
communicate through Windows Firewall, your computer is made more 
vulnerable. If you have many exceptions and open ports, your computer 
can become a victim of unknown intruders or viruses. Epson takes no 
responsibilities for damages caused by allowing exception in Windows 
Firewall.
A. Configuring the Network Interface using EpsonNet 
EasyInstall
If you configure the network interface using the computer 
running Windows XP Service Pack 2, follow the steps below to 
register the network configuration utility (EpsonNet EasyInstall 
or EpsonNet Config) to Windows Firewall as exceptions; 
otherwise you cannot configure the network interface because it 
is not displayed on the screen of the network configuration utility.
1. Insert the software CD-ROM in the CD-ROM drive.
Note:
❏If the installation screen appears, click Exit.
❏Do not eject the software CD-ROM before the registration is 
completed.
2. Click Start, point to Control Panel, and then select Security 
Center. Click Windows Firewall.