Epson 4880 C Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 161Table 3-2. Service request error list(continued)
Error Code
Description
Reference 
Page
00000101
CR Motor life
p.175
00010000
PF Motor Encoder check error
p.177
00010001
PF Motor out of step
p.178
00010002
PF Motor over current
p.178
00010003
PF Motor in-position time-out
p.179
00010004
CR Motor Encoder check error
p.179
00010005
CR Motor out of step
p.180
00010006
CR Motor over current
p.180...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 1623.2.2  Corrective Actions for Displayed WarningsWarnings replace the READY/PRINTING message in the LCD to notify the 
user of the condition, but printing may continue because printer operations are 
not affected.
A warning message cannot be cleared until the cause of the warning has been 
resolved.
The following explains corrective actions for when the warnings are displayed.MAINTENANCE TANK...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 163†
Recoverynnnn
Cause
Replacement part/unit
Remedy
(how to recover errors)
0002The number of CR movement cycles has 
reached predetermined value.Refer to SERVICE REQ. 00000101 (p.175).  Refer to SERVICE REQ. 00000101 (p.175).
0008RTC backup battery shut off / uninstalled RTC backup battery Replace RTC backup battery, turn on the printer in Maintenance Mode 2, and execute 
RTC&USB ID&IEEE1394 ID...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 164PAPER NEAR ENDCONVERSION CARTRIDGE LIFE NEAR END
Item
Description
LCD Panel message PAPER LOW
LED display Paper check LED: Blink
Explanation Occurs when the current remaining paper counter value is 
less than the near end setting value while the remaining 
paper detection is on with roll paper or cut paper loaded.
RecoveryExecute one of the following:
• Set the near end setting value so that it...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 1653.2.3  Corrective Actions for Error DisplayError messages replace the READY/PRINTING message in the LCD to notify the user of the condition.
The following explains corrective actions for when the errors are displayed.CLEANING FAILURECLEANING UNAVAILABLEMULTI SENSOR SN GAIN ERRORMULTI SENSOR PAPER RECOGNITION ERRORCUT SHEET SIZE ERROR
LCD
Explanation
Recovery
NOZZLES  STILL CLOGGED Dot missing is...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 166PAPER EJECT ERRORPAPER END/ROLL PAPER ENDBORDERLESS PRINTING UNAVAILABLE ERROR
LCD
Explanation
Recovery
REMOVE  PAPER After paper eject, paper is left in paper route and ASF Paper Sensor 
has turned ON.Release Paper Lever, remove paper, and pull down the lever.
After paper eject, paper is left in paper route and PE Sensor has 
turned ON. Or paper eject was done without the Paper Eject Roller...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 167PAPER RECOGNITION ERRORMANUAL CUT PAPER SET ERRORCUT SHEET LOADING ERRORPAPER SKEW ERROR
LCD
Explanation
Recovery
RELOAD  PAPER Paper is not loaded in the correct position.Release Paper Lever, reload the paper, and pull down the lever.
Paper was not ejected because its length was more than the limit for 
cut paper.
When printing on roll paper was finished, the right- and left end of the 
paper...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 168PAPER CUT ERRORCOMMAND ERRORWRONG INK ERRORWRONG ROLL PAPER PATH / WRONG ASF PAPER PATH / WRONG MANUAL PAPER PATHNote : Remote commands always have priority.ASF PROHIBITIONS
LCD
Explanation
Recovery
PAPER  NOT  CUT It is occurred when top of roll paper cannot be detected by Multi 
Sensor, after paper cut operation.Release Paper Lever, remove paper, and pull down the lever.
LCD
Explanation...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 169CONVERSION CARTRIDGE LIFE ERRORWRONG MK / PKINK ENDWRONG INK CARTRIDGEWRONG DESTINATIONUNAVAILABLE INK CARTRIDGE
LCD
Explanation
Recovery
REPLACE CNVRSION CRTG This error occurs when the conversion cartridge has been used more 
than its life times (100 times).Replace the conversion cartridge with a new one.
Press the [Pause] key to end K ink replacement.
LCD
Explanation
Recovery
INVALID INK CRTG...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CTroubleshooting Troubleshooting Based on Panel Messages 170WRONG LOGO ERRORINK CARTRIDGE FAILURENO INK CARTRIDGEMAINTENANCE TANK FULLRELEASING LEFT AND RIGHT (LEFT OR RIGHT) INK LEVER
LCD
Explanation
Recovery
INVALID  INK  CRTG This error occurs when an ink cartridge other than genuine one is 
inserted.Replace the ink cartridge with a genuine one.
Recover from the error forcibly by pressing the [Pause] key.
LCD
Explanation
Recovery
SET  INK  CRTG Ink...