Epson 3in1 Manual

1. Prepare Sheet 1 and Sheet 2. Cut off the margins of Sheet 1 along the vertical blue line through the center of
the top and bottom cross marks.
2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets
together from the back.
User's Guide
Printing
41 

3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the
left of the cross marks).
4. Tape the sheets together from the back.
5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together. User's Guide
Printing
42 

6. Cut off the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the left and right
side cross marks.
7. Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then
temporarily tape them together from the back.
User's Guide
Printing
43 

8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line
above the cross marks).
9. Tape the sheets together from the back.
User's Guide
Printing
44 

10. Cut off the remaining margins along the outer guide.
Printing Using Advanced Features
This section introduces a variety of additional layout and printing features available on the printer driver.
Related Information
&“Windows Printer Driver” on page 73
&“Mac OS X Printer Driver” on page 75
Adding a Printing Preset
If you create your own preset of frequently used print settings on the printer driver, you can print easily by
selecting the preset from the list. User's Guide
Printing
45 

Windows
To add your own preset, set items such as the Document Size and Paper Type on the Main or More Options tab,
and then click Add/Remove Presets in Printing Presets.
Mac OS X
Access the print dialog. To add your own preset, set items such as the Paper Size and Media Type, and then save
the current settings as the preset in the Presets setting.
Printing a Reduced or Enlarged Document
You can reduce or enlarge the size of a document by a specific percentage.
Windows
Note:
This feature is not available...

Printing a Watermark (for Windows Only)
You can print a watermark such as "Confidential" on your printouts. You can also add your own watermark.
Note:
This feature is not available with borderless printing.
Click Watermark Features on the More Options tab, and then select a watermark. Click Settings to change details
such as the color and position of the watermark.
Printing a Header and Footer (for Windows Only)
You can print information such as a user name and printing date as headers or...

The following screens are subject to change without notice.
AHome screen displayed when the application is started.
BDisplays information on how to setup the printer and a FAQ.
CDisplays the screen where you can select the printer and make printer settings. Once you have selected the
printer, you do not need to select it again from the next time.
DSelect what you want to print such as photos, documents, and web pages.
EDisplays the screen to make print settings such as paper size and paper type....

Using AirPrint
AirPrint allows you to wirelessly print to your AirPrint-enabled printer from your iOS device using the latest
version of iOS and from your Mac OS X v10.7.x or later.
Note:
❏If you disable the paper source configuration setting in the Printer Setup menu in Menu on the printer's control panel,
you cannot use AirPrint.
❏See the AirPrint page on the Apple website for more details.
1. Load paper in the printer.
2. Connect your device to the same wireless network that your printer is...

Canceling Printing - Windows
1. Access the printer driver window.
2. Select the Maintenance tab.
3.
Click Print Queue.
4. Right-click on the job you want to cancel and then select Cancel.
Related Information
&“Windows Printer Driver” on page 73
Canceling Printing - Mac OS X
1. Click the printer icon in the Dock.
2. Select the job you want to cancel.
3. Cancel the job.
❏Mac OS X v10.8.x to Mac OS X v10.9.x
Click 
 next to the progress meter.
❏Mac OS X v10.6.8 to v10.7.x
Click Delete. User's Guide...