Element Electronics ELEFC461 Digital Led Tv User Manual

Operating Your Television
20 Show / Hide 
Allows you to show or hide the channels.
Use UP or DOWN button to highlight the “Show / Hide” item, then 
press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press 
OK button to show or hide the highlighted channel. 
Channel No. 
Display the number of current channel.
Channel Label
Display the label of current channel.
DTV Signal:
Display the quality of current DTV signal.
50-1
50-2
50-3
Picture
Audio...

USB Multimedia Operation
21
Multimedia Operation: Music
USB
C:Photo MusicC:\MP3\
..
U01-1.mp3
U01-2.mp3
U01-3.mp3
U02-1.mp3
Play File  :0
Select Move Repeat001/005
Total size:3.8  GB
Unused size:3.7  GB..
Title:
Artist:
Album:
Year:
Bit Rate: 0kbps
Stop
00:00                         00:00
USB
C:Photo MusicC:\PICTURE\
..
2010100.jpg
2010101.jpg
2010102.jpg
2010103.jpg
Play File  :0
Select Move Repeat002/005
Total size:3.8  GB
Unused size:3.7  GB2010100.jpg1024 x686    229.0KB
Multimedia Operation: Photo...

22
Troubleshooting
If your television does not operate normally or does not turn on, please check the following
troubleshooting questions.  Remember to also check the other connected electronic devices, such as DVDs
or Blu-ray players to pinpoint any problem.  If the television still fails to operate normally, please contact
technical support (refer to Warranty page).
SYMPTOM POSSIBLE CAUSE REMEDY
Dead. No LED lit No power to the TV. Check all connections to the TV’s AC socket.
Dead. No LED lit red Set...

23
Troubleshooting
Before contacting the service technician, perform the following simple checks. If any problem still persists,
unplug the LED TV and call for assistance.
PROBLEM POSSIBLE SOLUTION
No sound and picture - Check that the main plug has been connected to a wall
outlet
- Check that you have pressed the POWER button on the 
front of the TV set
- Check the picture contrast and the brightness setting
Red LED indicator light Set in standby mode.  Press either the POWER button or 
the Standby...

24
Troubleshooting
NOTE:  When there is a problem in VGA mode (only when VGA mode is applied)
PROBLEM POSSIBLE SOLUTION
The signal is out of range - Adjust resolution, horizontal frequency, or vertical
frequency
- Check whether the signal cable is connected or loose
- Check the input source
Vertical bar or stripe on background, horizontal noise and 
incorrect positionSet the auto configure or adjust clock, phase or H/V 
position
Screen Color is unstable or is a single Color - Check the signal cable
-...

25
The FCC Wants You To Know
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or 
used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no...

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential 
adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a 
consumer, you are responsible for ensuring that this product is disposed of properly.  To find out how to properly dispose of this product,
please go to www.elementelectronics.com and...