Home > Electrolux > Washing Machine > Electrolux Ewx 12550 W User Manual

Electrolux Ewx 12550 W User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Electrolux Ewx 12550 W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Washing phase icons
    By selecting the wash programme, the
    washing programme phase icons
    corresponding to the various phases
    making up the programme are shown
    in the bottom of the display. 
    = washing
    = rinsing
    = draining
    = spinning
    = drying
    After the machine has started, only the
    running icon stays on. When the
    programme has finished, the flashing
    zero (
    0.00) is displayed.
    Soil level icons
    When selecting a programme on the
    display appears an icon indicating the
    degree of soiling automatically
    proposed by the machine.
    Child lock
    This function allows you to leave the
    appliance unsupervised during it’s
    functioning.
    Door locked light (9)
    The pilot light 
    9 illuminates to indicate
    that the appliance starts operating and
    the door is locked.
    This light indicates if the door can be
    opened: 
    
    
     light off: the door can be opened.
    7.4
    7.3
    7.2
    If your laundry is not removed within 10
    minutes after the programme is finished,
    the backlight of the display switches off
    and the energy saving system will be
    enabled.
    Only the button 
    8pilot light is blinking to
    indicate that the appliance has to be
    switched off.
    By pressing any button the appliance
    will come out from the energy saving
    status and it will be possible to set
    another washing programme or to
    swich off the appliance.
    control panelelectrolux  11
    132962570.qxd  29/07/2008  10.02  Pagina  11
     
    						
    							option:
    before pressing button 8: it will be
    impossible to start the machine.
    after pressing button 
    8: it will be
    impossible to change any other
    programme or option.
    To enable or disable this option press
    simultaneously for about 6 seconds
    buttons 
    5and 6until on the display,
    the icon  appears or disappears.
    Daily Use
    Load the laundry
    Open the door by carefully pulling the
    door handle outwards. Place the
    laundry in the drum, one item at a time,
    shaking them out as much as possible.
    Close the door.
    Measure out the detergent and the
    fabric softener
    Pull out the dispenser drawer until it
    stops. Measure out the amount of
    detergent required, pour it into the
    main wash compartment  and, if
    you wish to carry out the prewash,
    pour it into the compartment marked
    .
    
    2
    1
    12electroluxuse
    Use
    First Use
    ●Ensure that the electrical and water
    connections comply with the
    installation instructions.
    ●Remove the polystryrene block and
    any material from the drum.
    ●Before the first wash run a cotton
    cycle at the highest temperature,
    without any laundry in the machine,
    to remove any manufacturing
    residue from the drum and tub. Pour
    1/2 a measure of detergent into the
    dispenser drawer and start the
    machine.
    Acoustic signals
    The machine is provided with an
    acoustic device, which sounds in the
    following cases:
    ●at the end of the cycle
    ●if there is a fault
    By pressing buttons 
    4and 5
    simultaneously for about 6 seconds,
    the acoustic signal is deactivated
    (except if there is a fault).
    By pressing these 2 buttons again, the
    the acoustic signal is reactivated.
    Child safety lock
    This function allows you to leave the
    appliance unsupervised and not to
    worry that children might be injured by
    or cause damage to the appliance.
    This function remains able also when
    the washing machine is not working.
    There are two different ways to set this
    132962570.qxd  29/07/2008  10.02  Pagina  12
     
    						
    							If required, pour fabric softener into the
    compartment marked  (the amount
    used must not exceed the “MAX” mark
    in the drawer). Close the drawer gently.
    Select the required programme by
    turning the programme selector
    dial (1)
    Turn the programme selector dial to
    the required programme. 
    The green light of button 
    8starts to
    flash and the display shows the
    duration of the selected programme.
    The selector dial can be turned either
    clockwise or anticlockwise. Position 
    O
    corresponds to Reset programme/
    Switching OFF the machine.
    For the description of each
    washing programmes of the
    selector dial, consult the chapter
    «Washing programmes».
    At the end of the programme the
    selector dial must be turned to
    position 
    O, to switch the machine
    off.
    	
    
    	
    
    Attention!
    If you turn the programme selector dial
    to another programme when the
    machine is working, the redlight of
    button 
    8will blink 3 times and the
    message Errwill appear on the display
    to indicate a wrong selection. The
    machine will not perform the new
    selected programme.
    Programme Option buttons
    Depending on the programme, different
    functions can be combined. These
    must be selected after choosing the
    desired programme and before
    pressing the button 
    8.
    When these buttons are pressed, the
    corresponding pilot lights illuminate.
    When they are pressed again, the pilot
    lights go out.
    If an incorrect option is selected, the
    integrated red pilot light of the button
    8
    flashes 3 times and the Errmessage
    appears on the display for some
    seconds.
    For the compatibility among the
    washing programmes and the
    options see chapter «Washing
    Programmes».
    Select the temperature by pressing
    button 
    2
    Press this button repeatedly to
    increase or decrease the temperature,
    if you want your laundry to be washed
    at a temperature different from the one
    proposed by the washer-dryer.
    Select the spin speed, No or Rinse
    Hold option 
    by pressing button 3
    Press button 3repeatedly to change
    the spin speed, if you want your
    laundry to be spun at a speed different
    from the one proposed by the washer-
    useelectrolux  13
    132962570.qxd  29/07/2008  10.02  Pagina  13
     
    						
    							14electroluxuse
    dryer. The relevant light will light up.
    When you select a programme, the
    machine automatically proposes the
    maximum spin speed provided for the
    programme.
    No spin: by selecting this option, all
    spinning phases are suppressed and
    replaced by a drain, so as not to
    wrinkle the laundry. Recommended for
    extremely delicate fabrics.
    On some programmes the rinses will
    be performed with more water. 
    Rinse Hold:by selecting this option
    the water of the last rinse is not
    emptied out to prevent the fabrics from
    creasing. When the programme has
    finished the display shows 
    0.00
    flashing, the pilot light 9is on, the light
    of button 
    8is off and the door is
    locked to indicate that the water must
    be emptied out.
    To empty the water out, please
    read the chapter «At the end of the
    programme».
    Select the Extra Rinse option by
    pressing button 
    4
    The machine performs some additional
    rinses. This option is recommended for
    people who are allergic to detergents,
    and in areas where the water is very
    soft.
    Select the Drying Time 
    by pressing
    button
    5
    If you wish to carry out a timed drying
    programme, press this button until the
    drying time you want appears on the
    display according to the fabrics (cot-
    tons or synthetics) you have to dry.
    For Cottons you can select a drying
    time from 10 minutes to 250 minutes
    (
    4.10). 
    For Synthetics you can select a drying
    time from 10 minutes to 130 minutes
    (
    2.10).
    Every time you press this button the
    drying time increases by 5 mins.
    Select the Delay Start by pressing
    button 
    6
    Before you start the programme, if you
    wish to delay the start, press button 
    6
    repeatedly, to select the desired delay.
    The relevant light will illuminate.
    The selected delay time value (up to 20
    hours) will appear on the display for a
    few seconds, then the duration of the
    programme will appear again. The delay
    time value decreases by one unit every
    hour and then, when 1 hour remains,
    every minute.
    You must select this option after you
    have set the programme and before you
    press button 
    8.
    The door will be locked throughout the
    delay time. If you wish to add laundry in
    the machine during the delay time you
    will press button 
    8to put the machine
    in pause and wait until the pilot light 
    9
    goes out before opening the door. Add
    the laundry, close the door and press
    the button 
    8again.
    You can cancel or modify the delay time
    at any moment, before you press
    button 
    8.
    The wash programme can be delayed
    from 30 min - 60 min - 90 min, 2 hours
    and then by 1 hour up to a maximum of
    20 hours by means of this button.
    Selecting the delayed start.
     Select the programme and the
    required options.
     Select the delay start.
    t
    e
    132962570.qxd  29/07/2008  10.02  Pagina  14
     
    						
    							 Press button 8: the machine starts its
    hourly countdown.
    The programme will start after the
    selected delay has expired.
    Cancelling the delayed start after having
    started the machine
     Press button 
    8.
     Press button 
    6once until the symbol
    0’is displayed.
     Press button 
    8again.
    The Delay Start can not be selected
    with Drainprogramme.
    Select the Start/Pause by pressing
    button 
    8
    To start the selected programme, press
    button 
    8; the green pilot light stops
    flashing.
    To interrupt a programme which is
    running, press button 
    8: the green pilot
    light starts to flash.
    To restart the programme from the point
    at which it was interrupted, press
    button 
    8again.
    If you have chosen a delayed start, the
    machine will begin the countdown.
    If an incorrect option is selected, an
    integrated redpilot light of button 
    8
    flashes 3 times the message Erris
    displayed for a few seconds.
    Select the Time Manager option by
    pressing buttons 10
    This function allows you to modify the
    washing time, automatically proposed
    by the washer-dryer.
    By pressing this button repeatedly, the
    duration of the washing cycle can be
    increased or decreased.
    A soil level icon will appear on the
    display to indicate the chosen degree of
    soiling.
    (*) We recommend you to reduce the load
    sizes (see «Washing programmes»).
    Attention!
    This option cannot be selected with the
    Economy cottons programmes.
    The availability of these soil level icons
    change according to the type of fabric
    as shown in the follwing chart:
    Soil
    LevelIconType of fabric
    IntensiveFor heavy soiled items
    NormalFor normal soiled items
    DailyFor daily soiled items
    LightFor slightly soiled items
    QuickFor very slightly soiled items
    Super
    Quick (*)For items used or worn for a
    short time
    FabricSoil Level
    CottonsIntensiveNormalDailyLightQuickS. Quick
    95°-90°CXXXXXX
    60°CXXXXXX
    50°CXXXXXX
    40°CXXXXXX
    30°CXXXXXX
    Synthetics
    Delicates
    60°CXXXX
    40°CXXXX
    50°CXXXX
    40°C XXXX
    30°CXXXX
    30°CXXXX
    use electrolux  15
    132962570.qxd  29/07/2008  10.02  Pagina  15
     
    						
    							Altering an option or a running
    programme
    It is possible to change some options
    before the programme carries it out.
    Before you make any change, you must
    pause the washer-dryer by pressing
    button 
    8.
    (The 
    Time Manager optioncannot be
    modified after the programme has
    started. )
    Changing a running programme is
    possible only by resetting it. Turn the
    programme selector dial to 
    Oand then
    to the new programme position. Start
    the new programme by pressing button
    8 again. The washing water in the tub
    will not be emptied out. 
    Interrupting a programme
    Press button 
    8to interrupt a
    programme which is running, the
    corresponding light starts to flash. Press
    the button again to restart the
    programme.
    Cancelling a programme
    Turn the selector dial to 
    Oto cancel a
    programme which is running. You can
    now select a new programme.
    Opening the door after the
    programme has started
    First set the machine to pause by
    pressing button 
    8.
    If the light 
    9blinks and then goes off,
    the door can be opened. 
    If the light 
    9 remains lit, this means
    that the machine is already heating or
    that the water level is too high.
    In this case the door can not be
    opened.
    If you cannot open the door but you
    need to open it you have to switch the
    machine off by turning the selector dial
    to O. After a few minutes the door can
    be opened (pay attention to the
    water level and temperature!).
    After closing the door, it is necessary to
    select the programme and options
    again and press button 
    8.
    At the end of the programme
    The machine stops automatically, the
    pilot light of button 
    8and the light 9
    go off and three blinking «0.00» will
    appear on the display. The buzzer
    sounds.
    If a programme with an option that
    ends with water still in the tub has
    been selected, the pilot light 
    9remains
    lit and the door is locked to indicate
    that the water must be emptied out
    before opening the door.
    To empty out the water:
    ●turn the programme selector dial to
    O
    ●select the draining or the spinning
    programme
    ●reduce the spin speed if needed, by
    pressing the relevant button
    ●press button 8
    At the end of programme, the display
    shows 3 flashing zeros «
    0.00».the pilot
    lights 
    9goes off an the door can be
    opened.
    Turn the programme selector dial to 
    O
    to switch the machine off. 
    Remove the laundry from the drum and
    carefully check that the drum is empty.
    If you do not intend to carry out
    another wash, close the water tap.
    Leave the door open to prevent the
    formation of mildew and unpleasant
    smells.
    16electroluxuse
    132962570.qxd  29/07/2008  10.02  Pagina  16
     
    						
    							drying  electrolux  17
    Use - Drying
    DRYING ONLY
    The recommended loads size is 3 kg
    for cottons and linen, and 2 kg for
    synthetics.Note! It is also possible
    also to dry up to 4 kg of cotton
    items (see the drying time table).
    The water tap must be open and
    the drain hose must be positioned
    in the sink or connected to the
    drain pipe.
    1. Load the laundry.
    2.  Select the drying programme (for
    Cottons or Synthetics in the
    Drying sector).
    3. Press button
    5until the time you
    want appears on the display (see
    the drying programmes). Every time
    you press this button the drying
    time increases by 5 mins. 
    Note!
    The programme time will automatically
    increase by up to 2 minutes, this is
    quite normal.
    4. Press button 
    8 to start the pro-
    gramme. 
    After the programme has started, the
    time remaining is updated every
    minute.
    Note!
    The different type of cottons (towelling,
    sheets, shirts, and so on) or eventual
    laundry rolling up during spinning
    phase may cause a not uniform
    dryness. So, in the exceptional case
    that at the end of the cycle the laundry
    remains slightly wet, we suggest you to
    stretch the items rolled up out, to
    redistribute evenly the laundry in the
    drum and to select an additional drying
    cycle of 20-30 minutes.
    5. At the end of the programme, the
    buzzer sounds and three blinking
    «
    0.00» appears on the display. The
    pilot light 
    9is on to indicate that the
    door is locked.
    The last 10 minutes of the drying cycle
    correspond to an anti-crease phase.
    During this time the door is locked and
    the display keeps showing three
    flashing zeros «
    0.00» 
    Note!
    If you whish to open the door before or
    during the anti-crease phase or to
    interrupt it, press any button or turn the
    programme selector dial to any pro-
    gramme position (except 
    O), the door
    can be opened after some minutes
    (when the pilot light 
    9is off).
    6. Turn the selector dial to the 
    Oposi-
    tion to switch the machine off.
    Remove the laundry.
    132962570.qxd  29/07/2008  10.02  Pagina  17
     
    						
    							18electrolux drying
    Automatic washing and drying 
    (NON-STOP programme)
    For NON-STOP programmes, the
    recommended load size is 3 kg for
    cotton and 2 kg for synthetics.
    Note! It is also possible to dry up to
    4 kg of cotton items (see the drying
    time table).
    Do not use a dosing device/ball whe n
    carrying out a washing & drying
    programme.
    1. Load the laundry.
    2. Add detergent and fabric softener.
    3. Switch the machine on by turning
    the selector dial to the selected
    washing programme/fabric.
    4. Select the required options by
    pressing the relevant buttons.
    Note!
    If possible, do not select a spin speed
    lower than that proposed by the appli-
    ance to avoid a too long drying time so
    saving energy.
    In any case the reduction of the spin
    speed is only possible after selecting
    drying. 
    The lowest values you can select are
    the following:
    - 900 r.p.m. for cottons and 700
    r.p.m. for synthetics
    5. Select the drying time by pressing
    buttons 
    5. After a few seconds the
    display shows the entire duration of
    the washing and the selected drying
    cycle.
    6. Start the programme by pressing
    button 
    8.After the programme
    has started, the time remaining is
    updated every minute.
    7. At the end of the programme, fol-
    low the instructions given at point
    5 of the previous chapter.
    8. Turn the selector dial to the O
    position to switch the machine off.
    Remove the laundry.
    132962570.qxd  29/07/2008  10.02  Pagina  18
     
    						
    							washing hints and drying hintselectrolux  19
    Washing and Drying hints
    Sorting the laundry
    Follow the wash code symbols on
    each garment label and the
    manufacturer’s washing instructions.
    Sort the laundry as follows: whites,
    coloureds, synthetics, delicates,
    woollens.
    Temperatures
    Before loading the laundry
    Never wash whites and coloureds
    together. Whites may lose their
    “whiteness” in the wash.
    New coloured items may run in the first
    wash; they should therefore be washed
    separately the first time.
    Make sure that no metal objects
    are left in the laundry (e.g. hair
    clips, safety pins, pins).
    Button up pillowcases, close zip
    fasteners, hooks and poppers. Tie any
    belts or long tapes.
    Remove persistent stains before
    washing. 
    Rub particularly soiled areas with a
    special detergent or detergent paste.
    Treat curtains with special care.
    Remove hooks or tie them up in a bag
    or net.
    Avoid drying dark clothes with light
    coloured fluffy items such as towels as
    these can attract the fluff.
    Remove the laundry when the appli-
    ance has finished drying.
    To avoid a static charge when drying is
    completed, use either a fabric softener
    when you are washing the laundry or a
    fabric conditioner specifically for tumble
    dryers.
    Particularly delicate items such as syn-
    thetic curtains, woollen and silk,  gar-
    ments with metal inserts, nylon stock-
    ings, bulky garments such as anoraks,
    bedcovers, quilts, sleeping bags and
    duvets must not be machine dried.
    Garments padded with foam-rubber or
    materials similar to foam-rubber must
    not be machine dried; they represent a
    fire hazard.
    Also, fabrics containing residues of set-
    ting lotions or hair sprays, nail solvents
    or similar solutions must not be
    machine dried in order to avoid the for-
    mation of harmful vapours.
    For drying, follow the indications given
    on the manufacturer’s labels.
    May be tumble dried
    Drying at high temperature
    Drying at reduced temperature
    Do not tumble dry
    90°/95°
    for normally soiled white
    cottons and linen (e.g. tea
    cloths, towels, tablecloths,
    sheets...)
    50°/60°
    for normally soiled, colour
    fast garments (e.g. shirts,
    night dresses, pyjamas....) in
    linen, cotton or synthetic
    fibres and for lightly soiled
    white cotton (e.g.
    underwear).
    30° - 40°
    Cold
    for delicate items (e.g. net
    curtains), mixed laundry
    including synthetic fibres and
    woollens bearing the label
    «pure new wool, machine
    washable, non-shrink».
    132962570.qxd  29/07/2008  10.02  Pagina  19
     
    						
    							20electroluxwashing hints and drying hints
    Important
    As a dryer, the machine works on the
    condensation principle.
    Therefore, the water tap must be
    open and the drain hose must drain
    water into a sink or into the drain
    pipe, even during the drying cycle.
    Maximum loads
    Recommended loads are indicated in
    the programme charts.
    General rules:
    Cotton, linen:drum full but not too
    tightly packed;
    Synthetics:drum no more than half
    full;
    Delicate fabrics and woollens:drum
    no more than one third full.
    Washing a maximum load makes the
    most efficient use of water and energy.
    For heavily soiled laundry, reduce the
    load size.
    Laundry weights
    The following weights are indicative:
    Removing stains
    Stubborn stains may not be removed
    by just water and detergent. It is
    therefore advisable to treat them prior
    to washing.
    Blood:treat fresh stains with cold
    water. For dried stains, soak overnight
    in water with a special detergent then
    rub in the soap and water.
    Oil based paint:moisten with benzine
    stain remover, lay the garment on a
    soft cloth and dab the stain; treat
    several times.
    Dried grease stains:moisten with
    turpentine, lay the garment on a soft
    surface and dab the stain with the
    fingertips and a cotton cloth.
    Rust:oxalic acid dissolved in hot water
    or a rust removing product used cold.
    Be careful with rust stains which are
    not recent since the cellulose structure
    will already have been damaged and
    the fabric tends to hole.
    Mould stains:treat with bleach, rinse
    well (whites and fast coloureds only).
    Grass:soap lightly and treat with
    bleach (whites and fast coloureds only).
    Ball point pen and glue:moisten with
    acetone (*), lay the garment on a soft
    cloth and dab the stain.
    Lipstick:moisten with acetone as
    above, then treat stains with
    methylated spirits. Remove any
    residual marks from white fabrics with
    bleach.
    Red wine: soak in water and
    detergent, rinse and treat with acetic or
    citric acid, then rinse. Treat any residual
    marks with bleach.
    1200 gbathrobe 
    100 gnapkin
    700 gquilt cover
    500 gsheet
    200 gpillow case
    250 gtablecloth
    200 gtowelling towel
    100 gtea cloth
    200 gnight dress
    100 gladies’ briefs
    600 gman’s work shirt
    200 gman’s shirt
    500 gman’s pyjamas
    100 gblouse
    100 gmen’s underpants
    132962570.qxd  29/07/2008  10.02  Pagina  20
     
    						
    All Electrolux manuals Comments (0)

    Related Manuals for Electrolux Ewx 12550 W User Manual