Electrolux Ews 106430 W User Manual

4.
Press button 8 .
At the end of the programme, the door is re-
leased and can be opened. Turn the pro-
gramme selector dial to O to switch the ma-
chine off.
Remove the laundry from the drum and care-
fully check that the drum is empty. If you donot intend to carry out another wash, close
the water tap. Leave the door open to pre-
vent the formation of mildew and unpleasant
smells.
Stand by : once the programme has finished
after a few minutes the energy saving system
will be enabled. The brightness of...

All commonly available washing machine de-
tergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
WOOL  40° - Cold
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 1 kg
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics
with «hand washing» care symbol. Note : A single or
bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items,
redistribute the load...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SOAK
30°
Prewash - Soak for about 40 minutes - Stop with water
in the tub
Max. load 6 kg
Special programme for heavily soiled laundry. The ma-
chine performs a soak at 30°C. At the end of this time
the machine will stop automatically with water left in the
tub.
Before starting a new washing phase, it is necessary to
empty out the water by:
•Draining only : turn...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
COTTONS ECONOMY
90° - 40°
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 6 kg
White and fast coloured cotton
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and
the washing time will be extended. This allows to obtain
a good washing efficiency so saving energy.SPIN REDUCTION
NO SPIN
RINSE...

Descaling
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manufac-
turers instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This helps
to prevent mould and stagnant smells form-
ing inside the appliance. Keeping the door
open after a wash will also help to preserve
the door seal....

Washing drum
Rust deposits in the drum may occur due to
rusting foreign bodies in the washing or tap
water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any washing
to clean off any cleaning agent residues.
Programme: Short Cotton Programme at
maximum temperature and add approx.
1/4 measuring cup of...

5. Pull out the emergency emptying cap
from the filter cover, using pliers.
6. When no more water comes out, un-
screw the pump cover by turning it anti-
clockwise, using pliers, and remove the
filter. Always keep a rag nearby to dry up
any water spillages when removing the
cover.
Clean the filter under a tap, to remove
any traces of fluff.
12
7. Remove foreign bodies and fluff from the
pump seat and from the pump impeller.
8. Check carefully whether the pump im-
peller rotates (it rotates jerkily). If...

10. Replace the emergency emptying cap
into the filter cover and fix it firmly.
11. Close the pump door.
Warning! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump. Never remove the pump cover
during a wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When refitting the pump cover ,
ensure it is securely re-tightened so asto stop leaks and young children being
able to remove it.
Cleaning the water inlet filters
If you...

Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has
cooled down;
4. open the pump door;
5. place a bowl on the floor. Remove the
emergency emptying cap from the filter.
The water should drain by gravity into the
bowl. When the bowl is full, refit the cap
into the filter. Empty the bowl. Repeat the
procedure until water stops flowing out;
6. clean...