Electrolux Ews 106430 W User Manual

							4.
Press button 8 .
At the end of the programme, the door is re-
leased and can be opened. Turn the pro-
gramme selector dial to O to switch the ma-
chine off.
Remove the laundry from the drum and care-
fully check that the drum is empty. If you donot intend to carry out another wash, close
the water tap. Leave the door open to pre-
vent the formation of mildew and unpleasant
smells.
Stand by : once the programme has finished
after a few minutes the energy saving system
will be enabled. The brightness of the displayis reduced. By pressing any button the ap-
pliance will come out of the energy saving
status.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each gar-
ment label and the manufacturer’s washing
instructions. Sort the laundry as follows:
whites, coloureds, synthetics, delicates,
woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first wash;
they should therefore be washed separately
the first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable
to treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and
water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpen-
tine, lay the garment on a soft surface and
dab the stain with the fingertips and a cotton
cloth.Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since the
cellulose structure will already have been
damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with ace-
tone
1), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid, then
rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
1), then with acetic
acid; treat any residual marks on white fab-
rics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, me-
thylated spirits or benzine, then rub with de-
tergent paste.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the en-
vironment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
1) do not use acetone on artificial silkelectrolux  11
 
						

							All commonly available washing machine de-
tergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Follow the product manufacturer’s recom-
mendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer .
Quantity of detergent to be used
The type and quantity of detergent will de-
pend on the type of fabric, load size, degree
of soiling and hardness of the water used.Follow the product manufacturers’ instruc-
tions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during wash-
ing.
Degrees of water hardness
Water hardness is classified in so-called “de-
grees” of hardness. Information on hardness
of the water in your area can be obtained
from the relevant water supply company, or
from your local authority. If the water hard-
ness degree is medium or high we suggest
you to add a water softener following always
the manufacturer’s instructions. When the
degree of hardness is soft, readjust the quan-
tity of the detergent.
Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
COTTONS and LINENS
90° - Cold
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 6 kg - Reduced load 3 kg
1)
White and coloured cotton (normally soiled items).
SPIN REDUCTION
NO SPIN
RINSE HOLD
PREWASH
2)
EXTRA RINSE
TIME MANAGER
SYNTHETICS
60° - Cold
Main wash - Rinses
Maximum spin speed: 900 rpm
Max. load 3 kg - Reduced load 1,5 kg
1)
Synthetic or mixed fabrics: underwear, coloured gar-
ments, non-shrink shirts, blouses.
SPIN REDUCTION
NO SPIN
RINSE HOLD
PREWASH
2)
EXTRA RINSE
TIME MANAGER
DELICATES
40° - Cold
Main wash - Rinses
Maximum spin speed: 700 rpm
Max. load 3 kg - Reduced load 1,5 kg
1)
Delicate fabrics: acrylics, viscose, polyester.
NO SPIN
RINSE HOLD
PREWASH
2)
EXTRA RINSE
TIME MANAGER
12  electrolux
 
						

							Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
WOOL  40° - Cold
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 1 kg
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics
with «hand washing» care symbol. Note : A single or
bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items,
redistribute the load manually and then select the spin-
ning programme.
SPIN REDUCTION
NO SPIN
RINSE HOLD
SILK
30° - Cold
Main wash - Rinses
Maximum spin speed: 700 rpm
Max. load 1 kg
Delicate washing programme suitable for silk and mixed
synthetic items.NO SPIN
RINSE HOLD
LINGERIE
40° - Cold
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 2 kg
This programme is suitable for very delicate items such
a lingerie, bras and underwear. The maximum spin
speed is automatically reduced.SPIN REDUCTION
NO SPIN
RINSE HOLD
electrolux  13
 
						

							Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SOAK
30°
Prewash - Soak for about 40 minutes - Stop with water
in the tub
Max. load 6 kg
Special programme for heavily soiled laundry. The ma-
chine performs a soak at 30°C. At the end of this time
the machine will stop automatically with water left in the
tub.
Before starting a new washing phase, it is necessary to
empty out the water by:
•Draining only : turn the programme selector dial to
Drain programme. (Press the button 8 ).
•Draining and spinning : turn the programme selec-
tor dial to programme Spin, reduce the spin speed by
means of button 3 , and then press button 8 .
Important!  This programme cannot be used for very
delicate fabrics as silk or wool. Pour the detergent for
the soak programme into the compartment marked . At
the end of the soak (after having emptied out the water)
you can select the washing programme. (First turn the
programme selector dial to 
 , then to the programme
and press the button 8 ).
 
RINSE
Rinse - Long spin
Maximum spin speed: 1000 rpm
Max. load 6 kg
With this programme it is possible to rinse and spin cot-
ton garments which have been washed by hand. To in-
tensify the rinsing action, select the option EXTRA
RINSE. The appliance will add some additional rinses.SPIN REDUCTION
NO SPIN
RINSE HOLD
EXTRA RINSE
DRAIN
Draining of water
Max. load 6 kg
For emptying out the water of the last rinse in pro-
grammes with the option selected, which ends with
water left in the tub.  
SPIN
Drain and long spin
Maximum spin speed: 1000 rpm
Max. load 6 kg
Separate spin for hand washed garments and after pro-
grammes with the Rinse Hold and No Spin option se-
lected. You can choose the spin speed by pressing the
relevant button to adapt it to the fabrics to be spun.SPIN REDUCTION 
14  electrolux
 
						

							Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
COTTONS ECONOMY
90° - 40°
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 6 kg
White and fast coloured cotton
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and
the washing time will be extended. This allows to obtain
a good washing efficiency so saving energy.SPIN REDUCTION
NO SPIN
RINSE HOLD
PREWASH
2)
EXTRA RINSE
EASY IRON
60° - Cold
Main wash - Rinses
Maximum spin speed: 900 rpm
Max. load 1 kg
This programme can be selected for synthetic items
and mixed fabrics to be ironed. The laundry can be
gently washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine will per-
form additional rinses.SPIN REDUCTION
NO SPIN
RINSE HOLD
PREWASH
2)
EXTRA RINSE
JEANS
60° - Cold
Main wash - Rinses
Maximum spin speed: 1000 rpm
Max. load 3 kg
With this programme it is possible to wash items like
pants, shirts or jackets in Jeans and also jersey realized
with hi-tech materials. (The EXTRA RINSE option will be
activated automatically).SPIN REDUCTION
NO SPIN
RINSE HOLD
PREWASH
2)
BLANKET
40° -30°
Main wash - Rinses
Maximum spin speed: 700 rpm
Max. load 2 kg
Special programme for a single washable synthetic
blanket or duvet. 
 / OFF
For cancelling the programme which is running or to
switch the machine off .  
1) If you select the Quick or Super Quick option by pressing button 10 , we recommend that you reduce
the maximum load as indicated. Full loading is possible however with somewhat reduced cleaning
results. If you select the Refresh or Super Refresh option, we recommend that you reduce the load
even more.
2) If using liquid detergents, a programme without PREWASH must be selected.
Care and cleaning
Warning! You must disconnect the
appliance from the electricity supply,before you can carry out any cleaning or
maintenance work.
electrolux  15
 
						

							Descaling
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manufac-
turers instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This helps
to prevent mould and stagnant smells form-
ing inside the appliance. Keeping the door
open after a wash will also help to preserve
the door seal.
Maintenance wash
With the use of low temperature washes it is
possible to get a build up of residues inside
the drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash pro-
gramme.
• Use a normal measure of detergent, must
be a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance
with soap and water only, and then dry thor-
oughly.
Important! Do not use methylated spirits,
solvents or similar products to clean the
cabinet.
Cleaning the dispenser drawer
The detergent dispenser drawer should be
cleaned regularly.
The washing powder and additive dispenser
drawer should be cleaned regularly.
Remove the drawer by pressing the catch
downwards and by pulling it out.
Flush it out under a tap, to remove any traces
of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed. Clean all
parts with water.
Clean the chamber of dispenser drawer with
a brush.
16  electrolux
 
						

							Washing drum
Rust deposits in the drum may occur due to
rusting foreign bodies in the washing or tap
water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any washing
to clean off any cleaning agent residues.
Programme: Short Cotton Programme at
maximum temperature and add approx.
1/4 measuring cup of detergent.
Door seal
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
Drain pump
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise dur-
ing draining due to objects such as safety
pins, coins etc. blocking the pump;
• a problem with water draining is detected
(see chapter “What to do if...” for more de-
tails).
Warning! Before opening the pump
door, switch the appliance off and
remove the mains plug from the socket.
Proceed as follows:
1. Unplug the appliance.
2. If necessary wait until the water has
cooled down.
3. Open the pump door levering on the
groove with a coin (or with the suitable
tool, that you can find in the bag con-
taining the instruction booklet, depend-
ing on the model).
1
2
4. Place a bowl with a small edge close to
the pump to collect any spillage.
electrolux  17
 
						

							5. Pull out the emergency emptying cap
from the filter cover, using pliers.
6. When no more water comes out, un-
screw the pump cover by turning it anti-
clockwise, using pliers, and remove the
filter. Always keep a rag nearby to dry up
any water spillages when removing the
cover.
Clean the filter under a tap, to remove
any traces of fluff.
12
7. Remove foreign bodies and fluff from the
pump seat and from the pump impeller.
8. Check carefully whether the pump im-
peller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
9. Replace the filter into the pump by in-
serting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
18  electrolux
 
						

							10. Replace the emergency emptying cap
into the filter cover and fix it firmly.
11. Close the pump door.
Warning! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump. Never remove the pump cover
during a wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When refitting the pump cover ,
ensure it is securely re-tightened so asto stop leaks and young children being
able to remove it.
Cleaning the water inlet filters
If you notice that the machine is taking longer
to fill, check that the filter in the water inlet
hose is not blocked.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter in the hose using a hard
bristle brush.
4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine and
make sure the connection is tight.
8. Turn on the water tap.
electrolux  19
 
						

							Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has
cooled down;
4. open the pump door;
5. place a bowl on the floor. Remove the
emergency emptying cap from the filter.
The water should drain by gravity into the
bowl. When the bowl is full, refit the cap
into the filter. Empty the bowl. Repeat the
procedure until water stops flowing out;
6. clean the pump if necessary as previously
described;
7. screw the pump again and close the
door.Frost precautions
If the machine is installed in a place where the
temperature could drop below 0°C, proceed
as follows:
1. Pull out the plug from the power socket.
2. Turn off the water tap.
3. Unscrew the inlet hose.
4. Place the end of the inlet hose in a bowl
placed on the floor, open the emergency
emptying cup of the filter and let water
drain out.
5. Refit the emergency emptying cap into
the filter and screw the water inlet hose
back.
6. When you intend to start the machine up
again, make sure that the room temper-
ature is above 0°C.
What to do if...
Certain problems are due to lack of simple
maintenance or oversights, which can be
solved easily without calling out an engineer.
Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that
the red pilot light of button 8 blinks, one of
the following alarm codes appears on the
display and some acoustic signals sound ev-
ery 20 seconds to indicate that the machine
is not working:• : problem with the water supply.
•
 : problem with the water draining.
•
 : door open.
Once the problem has been eliminated,
press the button 8 to restart the programme.
If after all checks, the problem persists, con-
tact your local Service Centre.
ProblemPossible cause/Solution
The machine does not start:
The door has not been closed. E40
•Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button 8 has not
been pressed.
• Please turn the selector dial and press the button 8 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
20  electrolux