Electrolux Ewf 86110 W User Manual

degree of hardness is soft, readjust the quan-
tity of the detergent.
Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
COTTONS 95°-60°
Main wash - Rinses
Long spin at maximum spin speed (800/1000/1200 rpm
depending on a model)
Max. load 6 kg - Red. load 3 kg
For white and fast coloured cottons (heavily and nor-
mally soiled items).
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
DAILY
SUPER QUICK
1)...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SYNTHETICS 60°- COLD
Main wash - Rinses
Maximum spin speed 900 rpm or 800 rpm - depending on
a model
Max. load 3 kg - Red. load 1,5 kg
Synthetic or mixed fabrics: underwear, coloured gar-
ments, non-shrink shirts, blouses.
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
DAILY
SUPER QUICK 
1)
EXTRA RINSE
 2)
DELICATES 40°-30°
Main wash - Rinses
Maximum spin speed 700 rpm...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SPIN Drain and long spin
Long spin at maximum spin speed (800/1000/1200 rpm
depending on a model)
Max. load 6 kg
Separate spin for hand washed garments and after pro-
grammes with the Rinse Hold and Night Cycle option se-
lected. You can choose the spin speed by pressing the rel-
evant button to adapt it to the fabrics to be spun.
SPIN 
MINI 30°
Main wash -...

Cleaning the dispenser drawer
The detergent dispenser drawer should be
cleaned regularly.
1. Remove the detergent dispenser drawer
by pulling it firmly. Remove any traces of
accumulated powder. To aid cleaning,
the top part of the additive compartment
should be removed.
2. Remove the conditioner insert from the
appropriate compartment.
3. Clean all parts with water.
4. Put the conditioner insert in as far as it will
go, so that it is firmly in place
5. Clean all parts of the machine, especially
the...

Drain pump
The pump should be inspected regularly and
particularly if:
• the machine does not empty and/or spin
• the machine makes an unusual noise dur-
ing draining due to objects such as safety
pins, coins etc. blocking the pump.
Proceed as follows:
1. Disconnect the appliance.
2. If necessary wait until the water has
cooled down.
3. Open the pump door.
4. Place a container close to the pump to
collect any spillage.
5. Release the emergency emptying hose,
place it in the container and remove its
cap...

Cleaning the water inlet filters
If you notice that the machine is taking longer
to fill, check that the filter in the water inlet
hose is not blocked.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter in the hose using a hard
bristle brush.
4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the...

solved easily without calling out an engineer.
Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that
the red pilot light of button 5 blinks to indi-
cate that the machine is not working.Once the problem has been eliminated,
press the button 5 to restart the programme.
If after all checks, the problem persists, con-
tact your local Service Centre.
ProblemPossible cause/Solution
The washing machine does
not start:
The door has...

ProblemPossible cause/Solution
Unsatisfactory washing re-
sults:
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The door will not open:
The programme is still running.
• Wait the end...

If you are unable to identify or solve the prob-
lem, contact our service centre. Before tele-
phoning, make a note of the model, serial
number and purchase date of your machine:
the Service Centre will require this informa-
tion.
Mod. ... ... ...
Prod. No. ... ... ...
          Ser. No. ... ... ...
Mod. ..
. ... ...
Prod. No.
 ..
. ... ..
         
      
         
 Ser.  N
o. ... ...
 ...
Technical data
DimensionsWidth
Height
Depth
Depth (Overall dimensions)60 cm
85 cm
60 cm
63 cm
Electrical...

Installation
Unpacking
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1. After removing all the packaging, carefully
lay machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining and inlet hose from the hose
holders on the rear of the appliance.
3. Unscrew the three bolts.4. Slide out the...