Electrolux Esl 65070 User Manual

							ESL 65070R................................................ .............................................
ENDISHWASHER USER MANUAL
 
						

							CONTENTS
1.SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
2.PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
3.CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
4.PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
5.OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
6.BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
7.DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
8.
HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
9.CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
10.
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
11.TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
2www.electrolux.com
 
						

							1.  SAFETY INSTRUCTIONS
Before the installation and use of the ap-
pliance, carefully read the supplied in-
structions. The manufacturer is not re-
sponsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or per-
manent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a per-
son who is responsible for their safety.
• Do not let children play with the appli-
ance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
1.2 Installation
• Remove all the packaging.
• Do not install or use a damaged appli-
ance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Obey the installation instruction sup-
plied with the appliance.
• Make sure that the appliance is installed
below and adjacent to safe structures.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the pow-
er supply. If not, contact an electrician.• Always use a correctly installed shock-
proof socket.
• Do not use multi-plug adapters and ex-
tension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the appliance power supply ca-
ble need to be replaced, this must be
carried out by our Service Centre.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
•Only for UK and Ireland. The appli-
ance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Make sure not to cause damage to the
water hoses.
• The appliance is to be connected to the
water mains using the new supplied
hose-sets. Old hose sets must not be
reused.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
1.3 Use
• This appliance is intended to be used in
household and similar applications such
as:
– Staff kitchen areas in shops, offices
and other working environments
– Farm houses
– By clients in hotels, motels and other
residential type environments
ENGLISH 3
 
						

							– Bed and breakfast type environ-
ments.
WARNING!
Risk of injury, burns, electrical
shock or fire.
• Do not change the specification of this
appliance.
• Put knives and cutlery with sharp points
in the cutlery basket with the points
down or in a horizontal position.
• Do not keep the appliance door open
without supervision to prevent to fall on
it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.
Obey the safety instructions on the de-
tergent packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the ap-
pliance until the programme is comple-ted. There can be detergent on the
dishes.
• The appliance can release hot steam if
you open the door while a programme
operates.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
1.4 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent chil-
dren and pets to get closed in the ap-
pliance.
2. PRODUCT DESCRIPTION
12
347956
11
8 10
1Upper spray arm
2Lower spray arm
3Filters
4Rating plate
5Salt container
6Water hardness dial
7Rinse aid dispenser
8Detergent dispenser
4www.electrolux.com
 
						

							9Cutlery basket
10Lower basket
11Upper basket
2.1 Beam-on-Floor
The Beam-on-Floor is a light that shows
on the floor below the appliance door.
• When the programme starts to operate,
the red light comes on and stays on for
all the duration of the programme.• When the programme is completed, the
green light comes on.
• When the appliance has a malfunction,
the red light flashes.
The Beam-on-Floor goes off
when the appliance is deactiva-
ted.
3. CONTROL PANEL
132
5
4
AB
CDE
1On/off button
2Programme buttons
3Delay button
4Indicators
5Function buttons
IndicatorsDescription
Salt indicator. This indicator is off while the programme operates.
Multitab indicator.
End indicator.
4. PROGRAMMES
Pro-
gramme
1)
Degree of
soil
Type of loadProgramme
phasesDura-
tion
(min)Energy
(kWh)Water
(l)
 2)
All
Crockery, cut-
lery, pots and
pansPrewash
Wash 45 °C or 70
°C
Rinses
Dry90 - 1600.9 - 1.78 - 17
ENGLISH 5
 
						

							Pro-
gramme
1)
Degree of
soil
Type of loadProgramme
phasesDura-
tion
(min)Energy
(kWh)Water
(l)
Heavy soil
Crockery, cut-
lery, pots and
pansPrewash
Wash 70 °C
Rinses
Dry130 -
1501.4 - 1.715 - 17
 3)Fresh soil
Crockery and
cutleryWash 60 °C
Rinse300.99
ECO 4)Normal soil
Crockery and
cutleryPrewash
Wash 50 °C
Rinses
Dry150 -
1601.0 - 1.110 - 11
Normal or light
soil
Delicate
crockery and
glasswareWash 45 °C
Rinses
Dry70 - 800.9 - 1.012 - 13
1) 
The pressure and the temperature of the water , the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
2) 
The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
3) 
With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
4) 
With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
[email protected]
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
5.1 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The salt indicator stays off.
The programme duration can increase.
1.
Press the on/off button to activate the
appliance.2.Make sure that the appliance is in set-
ting mode, refer to ‘Setting and start-
ing a programme.
3.Press and hold function buttons (D)
and (E) at the same time until the mul-
titab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.Set the water softener to the highest
level.
6www.electrolux.com
 
						

							2.Make sure that the salt container and
the rinse aid dispenser are full.
3.Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4.
Adjust the water softener to the water
hardness in your area.
5.Adjust the released quantity of rinse
aid.
5.2 Acoustic signals
The acoustic signals operate in these
conditions:
• The programme is completed.
• The level of the water softener is adjus-
ted electronically.
• The appliance has a malfunction.
Factory setting: On.
It is possible to deactivate the
acoustic signals.
How to deactivate the acoustic
signals
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘Set-
ting and starting a programme’.
2.
Press and hold function buttons (B)
and (C) at the same time until the indi-cators of function buttons (A), (B) and
(C) start to flash.
3.
Press function button (C),
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The end indicator comes on.
4.Press function button (C). The end in-
dicator goes off, the acoustic signals
are deactivated.
5.
Deactivate the appliance to confirm
the setting.
How to activate the acoustic signals
1.
Refer to ‘How to deactivate the acous-
tic signals’, step (1) through (3).
2.Press function button (C),
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The end indicator is off.
3.Press function button (C). The end in-
dicator comes on, the acoustic signals
are active.
4.
Deactivate the appliance to confirm
the setting.
6. BEFORE FIRST USE
1.Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2.Fill the salt container.3.Fill the rinse aid dispenser.
4.
Open the water tap.
5.Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
6.1 Adjusting the water softener
Water hardnessWater softener
adjustment
German
degrees
(°dH)French
degrees
(°fH)mmol/lClarke
degreesManualElec-
tronic
51 - 7091 - 1259.1 - 12.564 - 882 1)10
ENGLISH 7
 
						

							Water hardnessWater softener
adjustment
German
degrees
(°dH)French
degrees
(°fH)mmol/lClarke
degreesManualElec-
tronic
43 - 5076 - 907.6 - 9.053 - 632 1)9
37 - 4265 - 756.5 - 7.546 - 5221)8
29 - 3651 - 645.1 - 6.436 - 4521)7
23 - 2840 - 504.0 - 5.028 - 3521)6
19 - 2233 - 393.3 - 3.923 - 2721)51)
15 - 1826 - 322.6 - 3.218 - 2214
11 - 1419 - 251.9 - 2.513 - 1713
4 - 107 - 180.7 - 1.85 - 1212
< 4< 7< 0.7< 512)12)
1) 
Factory position.
2) 
Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1.Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘Set-
ting and starting a programme’.
2.Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) start to flash.
3.Press function button (A).
• The indicators of function buttons
(B) and (C) go off.
• The indicator of function button (A)
continues to flash.
• Intermittent acoustic signals operate
and the end indicator flashes show-ing the current setting of the water
softener.
– The number of flashes of the end
indicator and the number of the
acoustic signals show the level of
the water softener.
E.g. 5 acoustic signals and 5
flashes + pause + 5 acoustic sig-
nals and 5 flashes = level 5.
4.Press function button (A) again and
again to change the setting. Each time
you press function button (A) you go
to the next level.
5.Deactivate the appliance to confirm
the setting.
8www.electrolux.com
 
						

							6.2 Filling the salt container
1.Turn the cap counterclockwise and
open the salt container.
2.Put 1 litre of water in the salt contain-
er (only for the first time).
3.Fill the salt container with dishwasher
salt.
4.Remove the salt around the opening
of the salt container.
5.Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
6.3 Filling the rinse aid dispenser
MAX1234+-
AB
DC
E1.Press the release button (D) to open
the lid (C).
2.Fill the rinse aid dispenser (A), no
more than the mark max.
3.Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.Close the lid. Make sure that the re-
lease button locks into position.
Fill the rinse aid dispenser when
the lens (E) is clear.
You can turn the selector of the
released quantity (B) between po-
sition 1 (lowest quantity) and posi-
tion 4 (highest quantity).
7. DAILY USE
1.Open the water tap.
2.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ’Set-
ting and starting a programme’.
• If the salt indicator is on, fill the salt
container.3.Load the baskets.
4.
Add the detergent.
• If you use the combi detergent tab-
lets, activate the multitab option.
ENGLISH 9
 
						

							5.Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
2030MAX1234+-
AB
C
1.Press the release button (B) to open
the lid (C).
2.Put the detergent in the compartment
(A) .
3.If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4.If you use detergent tablets, put the
tablet in the compartment (A).
5.Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
Setting mode
The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when,
after the activation, all the programme in-
dicators come on.
If the control panel shows other condi-
tions, press and hold function buttons (B)
and (C) at the same time until the appli-
ance is in setting mode.
Starting a programme without
delay start
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3.
Press the button of the programme
you want to set.
•The related programme indicator
stays on.
• All the other programme indicators
go off.
4.
Close the appliance door. The pro-
gramme starts.
Starting a programme with delay
start
1.Set the programme.2.Press the delay button again and
again until the indicator of the number
of hours you want to set comes on.
You can set 3, 6 or 9 hours.
• The delay indicator comes on.
3.
Close the appliance door. The count-
down starts. When the countdown is
completed, the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
Press and hold function buttons (B) and
(C) at the same time until the delay indica-
tor goes off and all the programme indica-
tors come on.
When you cancel a delay start, the
appliance goes back to setting
mode. You have to set the pro-
gramme again.
Cancelling the programme
Press and hold function buttons (B) and
(C) at the same time until all the pro-
gramme indicators come on.
10www.electrolux.com