Electrolux Esf 66030 User Manual

first use electrolux  11
Before using your dishwasher for the
first time:
Ensure that the electrical and
water connections comply with the
installation instructions
Remove all packaging from inside
the appliance
Set the water softener
Pour 1 litre of water inside the salt
container and then fill with
dishwasher salt
Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: 3 in 1, 4 in 1,
5 in 1 etc... set the 3 in 1 function
(see 3 in 1 function).
First use
Set the water...

12electroluxfirst use
The water softener must be set in
both ways: manually, using the water
hardness dial and electronically, using
some of the programme buttons on
the control panel
Setting manually
The dishwasher is factory set at
position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at
level 5. 
1. Press the On/Off button....

first use electrolux  13
Filling with dishwasher salt
Only use salt specifically designed for
use in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the
water softener.
Only fill with salt just before starting
one of the complete washing
programmes. 
This will prevent any grains of salt or
salty water, which may have been
spilt, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
To fill:
1....

14electroluxfirst use
Filling with rinse aid
Rinse aid ensures thorough rinsing,
and spot and streak free drying. 
Rinse aid is automatically added
during the last rinse.
1. Open the container by pressing
the release button (A). 
2. Add the rinse aid in the container.
The maximum level for filling is
indicated by max. 
The dispenser holds about 110 ml of
rinse aid, which is sufficient for
between 16 and 40 dishwashing
cycles, depending upon the dosage
setting. According to the finish and drying
results...

daily use electrolux  15
Check if it’s necessary to refill with
dishwasher salt or rinse aid
Load cutlery and dishes into the
dishwasher.
Fill with dishwasher detergent .
Select a wash programme suitable
for the cutlery and dishes.
Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any
object that can absorb water may not
be washed in the dishwasher.
Before loading the dishes, you
should:
- Remove all left over food and 
debris.
- Soften remnants of burnt food in...

16electroluxdaily use
For washing in the dishwasher the following cutlery and dishes
are not suitable: - Cutlery with wooden, horn, china or mother-of-
pearls handles.
- Plastic items that are not heat resistant.
- Older cutlery with glued parts that are not
temperature resistant.
- Bonded cutlery items or dishes.
- Pewter or copper items.
- Lead crystal glass.
- Steel items prone to rusting.
- Wooden platters.
- Items made from synthetics fibres.
are of limited suitability:
- Only wash stoneware in the...

daily use electrolux  17
Open the door and slide out the
baskets to load the dishes.
The lower basket
The lower basket is designed to take
saucepans, lids, plates, salad bowls,
cutlery etc.
Serving dishes and large lids should
be arranged around the edge of the
basket, ensuring that the spray arms
can turn freely.The two rows of prongs on the lower
basket can be easily lowered to allow
you to load pots, pans and bowls.
117998 54/0en  1-06-2006  11:01  Pagina 17
 

To make easier the loading of the
cutlery basket we advise you to lower
the cutlery basket’s handle (fig.2).
For best results we recommend you
to use the cutlery grids. 
If the size and dimensions of the cutlery
do not allow the use of the grids, they
can be easily hidden (fig. 3).
18electroluxdaily use
The cutlery basket
Long bladed knives stored in an
upright position are a potential
hazard.
Long and/or sharp items of cutlery
such as carving knives must be
positioned horizontally in the upper
basket....

daily use electrolux  19
The cutlery basket is in two parts
which can be separated to give
greater loading flexibility. To separate
the two parts, slide them horizontally
in opposite directions and pull them
apart (fig. 4). 
To reassemble, reverse the
procedure.
fig. 4
The upper basket 
The upper basket is designed for
saucers, salad bowls, cups, glasses,
pots and lids. 
Arrange items on and underneath the
cup racks so that water can reach all
surfaces.
Glasses with long stems can be
placed upside down...

For glasses with long stems
(according to the size and
dimensions): set the glass holder to
the left or to the right position.
The central rows of prongs can be
easily lowered to improve the loading
flexibility.
Before closing the door, ensure that
the spray arms can rotate freely. 
20electroluxdaily use
117998 54/0en  1-06-2006  11:01  Pagina 20