Electrohome Vistapro 2000 Users Manual
Have a look at the manual Electrohome Vistapro 2000 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 19 Electrohome manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
OPTIONAL INPUT MODULES VistaPro 2000 Users Manual E-3 The Composite/S-Video Input Module may be installed in a VistaPro 2000 projector, a Marquee signal switcher or a Marquee Case/Power Supply. The module receives composite video or S-video input signals from tape or disk players. Video inputs are 75 S terminated. Video outputs are provided for buffered loop-through to another display device. Features à BNC connectors for composite RGB signals à 4-pin mini-DIN connectors for S-Video signals à RCA connectors for left and right channel audio inputs à buffered loop-through video outputs NOTE: This interface is not a decoder. Proper display of NTSC, PAL, OR SECAM signals requires that the VistaPro 2000 includes a multi-standard decoder. The HDTV Input Module may be installed in a VistaPro 2000 projector, Marquee signal switcher, or Marquee Case/Power Supply. The module receives HDTV analog RGB input signals with tri-level sync. Features à accepts RGB video with tri-level composite sync à BNC connectors for RGB signal inputs à RCA connectors for left and right channel audio inputs The PC Analog Input Module may be installed in a VistaPro 2000 projector, Marquee signal switcher, or Marquee Case/Power Supply. The module receives analog RGB input signals from IBM PC compatibles or Macintosh computers. Video inputs are 75 S terminated. Video outputs are provided for buffered loop- through to another display device. Composite / S-Video Input Module 38-801004-xx HDTV Input Module 38-801005-xx PC Analog Input Module 38-801006-xx
OPTIONAL INPUT MODULES E-4VistaPro 2000 Users Manual Features à accepts VGA or MAC RGB video à 15 pin D connectors for video à RCA connectors for left and right channel audio inputs à active loop-through video outputs NOTE: 1) This interface does not accept VGA and MAC signals simultaneously. 2) Trademarks are the rights of their respective owners. The Marquee Case/Power Supply enables you to use specific input modules as stand-alone interfaces. Two modules are available: one for use with 120 volt line voltage (38-801023-XX), and the other for use with 220 volt line voltage (38-801026-XX). Both models include a 15 Vdc, 500 mA AC adapter. Features à easy installation — no tools required à can be used with the following VistaPro 2000 input modules: RGB Input, RGB Loop-Thru, Composite/S-Video, HDTV, and PC Analog à retaining clip to secure AC adapter à non-slip feet à supplied with 110 or 220 volt AC adapter Marquee Case/Power Supply 38-801023-xx 38-801026-xx
Index VistaPro 2000 Users Manual E-1 A Accessories, 5-3 Ambient light, 1-1, 2-2, 2-3, 2-4 Anamorphic, 3-17 and screen size, 2-4 Audio Connection, 2-9 Auto Power up, 3-26 AutoSource Checkbox, 3-13 B Batteries, 4-3 Baud rate, 2-13, 2-14, 3-25 Blanking, 3-17 Brightness, 3-21, 5-1 Brightness Key, 3-7 Broadcast Command, 3-7, 3-26 C Checkboxes, Using, 3-11 Color, 3-21 Color Temperature, 3-22, 5-1 Communication Cables, 2-13 Contrast, 3-21 Contrast Key, 3-6 Contrast Ratio, 5-1 D DAT 1, 2-8, 3-5 extra video sources, 2-10 Dat 2, 2-11, 3-5 Detail, 3-22 digital micromirror device, 1-1 Display Failure, 4-10 Display Adjustments Manual, 2-2, 2-12, 3-2 Display Problems Faintness, 4-11 Inaccurate colors, 4-13 Incomplete Image, 4-12 Instability, 4-11, 4-12 Keystoned image, 4-13 Noise in image, 4-13(display problems, cont’d) Out-of-focus, 4-13 Proportion, 4-12 Wrong Orientation, 4-12 Dynamic Scaling, 3-18 How to Access, 3-18 Typical Procedure, 3-20 When to Use, 3-18 E Enter Key, 3-6 Error Conditions, 3-29 Displaying, 3-26 Exit Key, 3-6 F Fans Lamp Cooling, 2-11 Filter Replacement Procedure, 4-8 Warning, 4-2 Focus, 2-2, 2-3, 2-12, 3-2 Folded Optics, 2-8 formats video, 1-1, 5-2 Front IR Keypad, 3-24 Function (*) Key, 3-8 H Hard Reset, 3-3, 3-30 Help Context-sensitive, 3-10 From presentation level, 3-10 Help Key, 3-8 Horizontal Capture, 3-19 Horizontal Display, 3-19 Horizontal Margin, 3-19 Horizontal Position, 3-16 I Image Orientation, 2-12, 3-25 InMenu Checkbox, 3-13 Installation Front Screen, 2-3
INDEX INDEX-2VistaPro 2000 Users Manual (Installation, cont’d) Rear Screen, 2-4, 2-8 Type, 2-2 Interfaces Optional, 2-11 IR Sensors, 3-2 K Keypad Protocol, 2-15, 2-18, 3-5, 3-24, 3- 25, 4-10 Changing, 2-15, 2-18 Conflicts, 2-18 Default, 2-15, 3-5 Hard-wired, 2-16 Keypad, IR Remote, 4-3 Description and Use, 3-4 Failure, 4-11 Keypad, Wired Description and Use, 3-4 Keystone, 2-7, 2-12 L Lamp Cleaning, 4-3 Cooling, 4-2 Failure, 4-11 Hours of Use, 4-4 Recording serial number, 3-27 Replacement Procedure, 4-4 Resetting timer, 3-28 Specifications, 5-2 Timer Message, 3-26, 4-4 Lamp Replacement Warning, 4-2 Lamp Timer Resetting, 4-9 Language, 3-25 LEDs, Status, 3-2, 3-30 Lens Cleaning, 4-3 Replacement Procedure, 4-9 Types available, 5-1 Lens type and throw distance, 2-7 Leveling, 2-1, 2-8, 2-12, 4-13 Locked Sources, 3-13 M Menu Key, 3-6 Menu, Image Settings, 3-20 Menu, Main, 3-9 Menu, Preferences, 3-24 Menu, Service, 3-28 Menu, Size & Position, 3-16 Menu, Source Setup, 3-13 Menu, Status, 3-26 Multiple projectors, 2-13, 2-15, 3-28 Connecting, 2-14 Mute Key, 3-8 N Numerical Entry, 3-11 O Odd/Even, 3-24 Opening Screen, 3-26 P Pan Key, 3-8 Pixel Phase, 3-17 Pixel Phase Key, 3-7 Pixel Track Key, 3-7 Pixel Tracking, 3-16, 4-12, 4-13 Power Connection, 2-1, 2-11, 3-2 Problems, 4-10 Requirements, 5-2 Warning, 2-1, 4-2 Presentation Level Definition, 3-5 Projector Cleaning/Maintenance, 4-3 Components, 1-2, 3-1, 5-3 Construction, 1-1 Controlling with IR Remote, 3-7 Dimensions, 5-3 Features, 1-1 Function, 1-1 Installation, 2-1 Networks, 2-14 Number, 2-15, 3-25, 3-28 Overseas export model, 1-2 Position & Mounting, 2-11 Position and Mounting, 2-6 Quick Setup, 2-1 Service, 1-2, 4-3 Ventilation, 2-6, 4-2 Warm-up, 2-1 Pull-down lists, 3-11 R Rear IR Keypad, 3-24 Resizing, 3-17 Resolution, 1-1, 3-23, 5-1 Revert Button, 3-9 RGB Connection, 2-8, 3-2 Frequencies, 5-1 RS-232, 1-1, 2-12, 2-13, 2-14, 2-15, 3-2, 3- 25, 3-28, 3-29, 5-2, 1 Communication Cables, 3-25 Connection, 2-12 Software commands, 3-29 S Screen size, 1-1, 2-6, 2-7, 4-13, 5-1 and aspect ratio, 2-4
INDEX VistaPro 2000 Users Manual INDEX-3 Screen Type, 2-2 Service, 1-2 Service Requirements, 4-3 Signal Type Checkbox, 3-23 Slidebars Displaying, 3-26 Using, 3-10 Slot, 3-13 Source Connection, 2-1, 2-8 Selection, 2-1, 3-12, 3-25 Selection Key, 3-6 Source Setups Copying, 3-14 Definition, 3-12 Deleting, 3-15 Editing, 3-14 New, 3-12 Updating, 3-15 Sources Source Name, 3-14 Source#, 3-14 Specifications, 5-1 Standby Key, 3-6 Switcher, 2-13, 3-25 Sync Def. and types, 5 Sync Tip Clamping, 3-23 T Test Patterns, 3-28 Text Entering/Editing, 3-11 Throw distance, 2-1, 2-6, 2-7, 4-10, 4-13 Timeouts, 3-10 Tint, 3-22 V VCR Checkbox, 3-23 Vertical Capture, 3-19 Vertical Display, 3-19 Vertical Margin, 3-19 Vertical Offset, 2-7, 4-10, 5-1 Adjust, 2-12, 3-2 Vertical Position, 3-16 VID 1, 3-6 Connection, 2-9 VID 2, 2-9, 3-6 Video, 3-2 Formats, 5-2 Video Decoder Module, 1-2 Video Standard Checkbox, 3-23 Video Termination, 3-26 W Warnings, 4-1 Warranty, 1-2, 4-9 Wired Keypad option, 3-25 Y YUV (Component Video) Connection, 2-9 Z Zoom, 2-2, 2-4, 2-12, 3-2, 5-1 screen size, 2-4