Eizo Flexscan Sx2761w Users Manual

19Chapter 2  Settings and Adjustments

Translucent
Set the transparency for menu display using the following procedure.
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
.
The  menu appears.
(4)  Adjust the transparency for menu display with  or , and press .
The transparency setting is completed.
2-10  Setting Orientation
● To set the orientation of the Adjustment menu [Orientation]
This function allows you to change...

20Chapter 2  Settings and Adjustments

NOTE
•  For main default settings, refer 
to “Main default settings (factory 
settings)” on page 30.
2-12  Setting BrightRegulator
● To set automatic brightness adjustment [BrightRegulator]
The sensor on the front side of the monitor detects the environmental brightness 
to adjust the screen brightness automatically and comfortably.
(1) Choose  from the Adjustment menu, and press 
.
(2) Choose < BrightRegulator> from the  menu, and press .
The BrightRegulator...

21Chapter 3  Connecting Cables

3-1  Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I connector on the 
back of the monitor.
Connection examples
DVI-I connector(Signal 1)
DVI-I connector(Signal 2)
PC 1PC 2Example 1DigitalDVISignal cable  (supplied FD-C39)Signal cable (supplied FD-C16)D-sub mini 15-pinAnalog
Example 2AnalogD-sub mini 15-pinSignal cable  (FD-C16 option)Signal cable (supplied FD-C16)D-sub mini 15-pinAnalog
Example 3DigitalDVISignal Cable  (FD-C39...

22Chapter 3  Connecting Cables

● To set priority of PC to be displayed [Input Priority]
When two PCs are connected, either one can be displayed preferentially. The 
monitor senses the input signal regularly. When the signal that is given priority 
with the  setting is input, signal input switches automatically to 
the prior signal.
Priority settingFunction
1
Input from Signal 1
The input signal from “Signal 1” is displayed in the following cases.
•  When the monitor is turned on.
•  When the PC for the...

23Chapter 3  Connecting Cables

Attention
•  This monitor may not work depending 
on PC, OS or peripheral devices to be 
used. 
For USB compatibility of peripheral 
devices, contact their manufactures.
•  If the monitor is in the power saving 
mode, or if the monitor is connected 
to the power outlet with the monitor 
turned off, all the devices connected 
to the USB ports (upstream and 
downstream) work. Therefore, power 
consumption of the monitor varies 
with connected devices even in the 
power...

24Chapter 4  Troubleshooting

Chapter 4  Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
•  No-picture problems → See No.1 - No.2.
•  Imaging problems (digital input) → See No.3 - No.8.
•  Imaging problems (analog input) → See No.3 - No.13.
•  Other problems → See No.14 - No.17.
•  USB problems → See No.18.
ProblemsPossible cause and remedy
1. No picture
•  Power indicator does not light. •  Check whether the power cord is connected correctly....

25Chapter 4  Troubleshooting
ProblemsPossible cause and remedy
9.  Display position is incorrect.
•  Adjust image position so that it is displayed properly 
within the display area using the  adjustment. 
(See page 9)
•  If the problem persists, use the graphics board’s utility if 
available to change the display position.
10.  Screen image displayed is smaller or larger than 
the actual screen image. •  Adjust the resolution using  so that the input signal resolution equals the resolution in the...

26Chapter 5  Reference

Chapter 5  Reference
5-1  Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be 
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1  Lay the LCD monitor on a soft cloth spread over on a stable 
surface with the panel surface facing down.
2  Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the 
screwdriver.
3  Attach the monitor to the arm or stand.Secure the...

27Chapter 5  Reference

Attention
•  Never use any solvents or chemicals, such as thinner, benzene, wax, 
alcohol, and abrasive cleaner, which 
may damage the cabinet or LCD 
panel.
NOTE
•  Optional ScreenCleaner is 
recommended for cleaning the LCD 
panel surface.
5-2  Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild deter gent.
LCD Panel
•  Clean the LCD panel with a soft cloth such as cotton...

28Chapter 5  Reference

5-3  Specifications
SX2461W
LCD Panel24.1-inch (610 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch0.270mm
Horizontal Scan FrequencyAnalog: 24-94kHzDigital: 31-76kHz
Vertical Scan Frequency
Analog: 49-86Hz (Non-interlace) (1600 × 1200: 49-76Hz)(1920 × 1200: 49-61Hz)Digital: 59-61Hz (Non-interlace)
(VGA TEXT: 69-71Hz)
Resolution1920 dots × 1200 lines
Max. Dot ClockAnalog: 202.5MHzDigital: 162MHz
Max. Display...