Eizo Flexscan Sx2761w Users Manual

9Chapter 2  Settings and Adjustments

(2)  Press .
A message “Your setting will be lost, if you press again now” appears for 
five seconds.
(3)  Press  again while the message is displayed.
The Auto Adjustment function begins (showing a running status icon) to 
adjust flickering, screen position, and screen size automatically.
    • If the screen is displayed correctly : go to step 5
• If the screen is not displayed correctly : go to step 
4
4  Perform advanced adjustments for the following using the...

10Chapter 2  Settings and Adjustments

●  To adjust extra or cut image [Resolution]
This adjustment is available to equalize the resolution shown on the 
Setting menu and the resolution of input signal.
(1)  Choose  from the  menu, and press 
.
The  menu appears.
(2)  Adjust the vertical resolution with  or , and then horizontal 
resolution with  or , and press .
The adjustment is completed.
Extra image is displayed due to excessive dots.
A part of image is cut due to short dots.
5  Adjust the color...

11Chapter 2  Settings and Adjustments

2-3  Color Adjustment
Simple adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor brightness, 
etc.
● FineContrast Mode
An appropriate display mode is selectable out of five modes.
ModePurpose
CustomAvailable for making desired setting.
sRGBSuitable for color matching with sRGB compatible peripherals.
Text
Suitable for displaying texts for word processing or spreadsheets.
PictureSuitable for displaying images such as...

12Chapter 2  Settings and Adjustments

Advanced Adjustments [Adjustment menu]
Independent setting and saving of color adjustment are available for each 
FineContrast mode.
● To select an appropriate mode for images
✓: Adjustment available     −: Invalid for adjustment
IconFunctionFineContrast mode
CustomsRGB
TextPictureMovie
Brightness*✓✓✓✓✓
Temperature*✓−✓✓✓
Gamma*✓−✓−−
Saturation✓−✓✓✓
Hue✓−✓✓✓
Gain✓−−−−
6 Colors✓−−−−
Reset✓✓✓✓✓
*  These items can also be set or adjusted with the FineContrast menu....

13Chapter 2  Settings and Adjustments

MenuDescriptionAdjustment range
GainTo adjust red, green, and blue to a desired color tone respectively
0 to 100%Adjust the respective brightness of red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment.
NOTE
•  The values shown in the “%” are available only as reference.
•  When using the  setting, the  setting is set to “Off.”
6 ColorsTo adjust  and  in Red, 
Yellow, Green, Cyan, Blue, 
and Magenta...

14Chapter 2  Settings and Adjustments

2-4  Off Timer/Power Saving Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time 
has passed. This function serves to reduce afterimages caused when the monitor 
screen is left on for a long time period without use. Use this function when an 
image is displayed throughout the day.
[Off Timer System]
TimerMonitorPower Indicator
ON time (1H - 23H)OperatingBlue
Last 15 min. in “ON...

15Chapter 2  Settings and Adjustments

● To set monitor power-saving [VESA DPMS/DVI DMPM]
■  Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PCMonitorPower 
Indicator
OperatingOperatingBlue
Power saving STAND-BY SUSPENDED OFF
Power savingOrange
[Procedure]
(1)  Choose  from the Adjustment menu, and press 
.
The set menu appears.
(2)  Select “VESA DPMS” with  or , and press .
The power saving setting is completed.
[Resumption Procedure]
•  Operate the mouse or...

16Chapter 2  Settings and Adjustments

2-5  Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is 
displayed in full screen automatically. You can change the screen size by using 
 from  menu.
MenuFunction
Full Screen (default setting)
Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate.
EnlargedDisplays an image in full screen. In some cases, a...

17Chapter 2  Settings and Adjustments

2-6  Power Indicator/EIZO Logo Display 
Setting
● To turn off the Power indicator while a screen is displayed 
[Power Indicator]
This function enables to turn off the Power indicator (blue) while a screen is 
displayed.
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  menu appears.
(3)  Select “Disable” with  or , and press .
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing...

18Chapter 2  Settings and Adjustments

NOTE
•  The display time of the FineContrast 
mode remains unchanged.
2-8  Locking Buttons
● To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be locked•  (Enter button) 
•  (Auto button)
•  (Mode button) 
•  /  /  /  / (Control buttons)
Buttons that cannot be locked•  (Power button)
•  (Input signal selection)
•  (Adjustment Lock button) 
(1)  Press  for more than two seconds.
The...