Eizo Flexscan Sx2262w Users Manual

							21Chapter 2  Adjusting Screen
● To adjust the gamma value [Gamma]
The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, 
however, the variation rate is not proportional to the input signal. To keep the balance between the input 
signal and the luminance of the monitor is called as “Gamma correction”.
Adjustable range: 1.8-2.6
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
A

djust the gamma value with 
 or .
4.
 
P

ress 
 to exit the adjustment.
● To adjust the hue [Hue]
This function allows you to adjust the hue.
Adjustable range: -100 to 100
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose , and press 
.
4.
 
A

djust the hue with 
 or .
5.
 
P

ress 
 to exit the adjustment.
Attention
• This function does not enable to display every color gradation.
● To adjust the color saturation [Saturation]
This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -100 to 100
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose , and press 
.
4.
 
A

djust the saturation of the color with 
 or .
5.
 
P

ress 
 to exit the adjustment.
Attention
• This function does not enable to display every color gradation.
NOTE
• Setting the minimum (-100) turns the image to a monochrome screen.
  
						

							22Chapter 2  Adjusting Screen
● Enable/Disable Contrast Enhancer [Contrast Enhancer]
This feature manages the brightness and gain levels of the backlight to match the image displayed while 
also improving the sense of contrast of images by correcting gamma values.
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose , and press 
.
4.
 
Se

lect “On” or “Off ” with 
 or .
5.
 
P

ress 
 to exit the adjustment.
● To enhance the outline of the image [Outline Enhancer]
OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference 
between pixels composing the images. This may improve the texture of the material and its feel of the 
images. On the contrary, it also functions to reproduce the images smoothly by gradating its outline.
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose , and press 
.
4.
 
Se

lect the display status in the range from -3 to 3 (soft to sharp) with 
 or  as desired.
5.
 
P

ress 
 to exit the adjustment.
● To adjust the gain value [Gain]
Each luminance of red/green/blue composing the color is called “Gain”. The gain adjustment may change 
the color tone of the “White”.
Adjustable range: 0 to 100%
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose , and press 
.
4.
 
C

hoose the color for adjustment among , , or  to adjust, and press 
.
5.
 
A

djust the gain with 
 or .
6.
 
P

ress 
 to exit the adjustment.
NOTE
• The gain value may change depending on the value of the color temperature.
•  
W
 hen changing the gain value, the color temperature adjusting range is changed to “User”.
•
 
T
 his function does not enable to display every color gradation.
  
						

							23Chapter 2  Adjusting Screen
● To adjust six colors [6 Colors]
The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and 
Blue.
Adjustable range: -100 to 100
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose , and press 
.
4.
 
 C

hoose the color for adjustment among , , , , , or , 
and press 
.
5.
 
Se

lect  or , and press 
.
6.
 
A

djust the 6 colors with 
 or .
7.
 
P

ress 
 to exit the adjustment.
  
						

							24Chapter 2  Adjusting Screen
2- 4. Displaying Lower Resolutions
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is displayed in full screen 
automatically. You can change the screen size by using  from  menu.
Menu Function
Full  
(Default setting) Displays an image in full screen. Images are distorted in some cases because the 
vertical rate is not equal to the horizontal rate.
Enlarged Displays an image in full screen. In some cases, a blank horizontal or vertical border  appears to equalize the vertical rate and the horizontal rate.
Normal  Displays images with the specified resolution.
Example: Image size 1280 x 1024 
Full 
(Default setting) Enlarged 
Normal 
(1920 x 1200) (1500 x 1200) (1280 x 1024)
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “Full Screen,” “Enlarged,” or “Normal” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
  
						

							25Chapter 3  Setting Monitor
Chapter 3 Setting Monitor
3-1. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode 
unchanged.
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect the mode to change its settings with 
 or , and press .
4.
 
Se

lect “On” or “Off ” with 
 or .
5.
 
P

ress 
 to exit the adjustment.
Attention
• You cannot set all the modes disable. Set at least one mode to “On”.
3-2. Locking Buttons [Key Lock]
This function allows you to lock to prevent changing the adjusted/set status.
Procedure
1.
 
P
 ress 
 to turn off the monitor.
2.
 
P

ress 
 holding  down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose  from the  menu, and press .
4.
 
Se

lect “Off ”, “Menu”, or “All” with 
 or , and press .
Settings   Buttons that can be locked
Off 
(Initial settings) None (All buttons are enabled)
Menu  
 button
All All buttons excluding 
5. Select “Finish” with  or .
6.
 
P

ress 
 to exit.
The Optional Settings menu is closed.
  
						

							26Chapter 3  Setting Monitor
3-3. Setting the EIZO Logo Display [Logo]
The EIZO logo appears on the display when turning on the monitor. This function allows you to display, 
or not, the EIZO logo.
Procedure
1. 
P
 ress 
 to turn off the monitor.
2.
 
P

ress 
 holding  down at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose  from the  menu, and press .
4.
 
Se

lect “On” or “Off ” with 
 or , and press .
5.
 
Se

lect “Finish” with 
 or .
6.
 
P

ress 
 to exit the Optional Settings.
The Optional Settings menu is closed.
3- 4. Setting Orientation [Orientation]
● To set the orientation of the Adjustment menu
This function allows you to change the orientation of the Adjustment menu when using the monitor 
screen in vertical display position. (Default settings : Landscape)
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “Landscape” or “Portrait” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
5.
 
W

hen selecting “Portrait”, turn the monitor screen 90° in clockwise direction.
Attention
• Be sure that the cables are correctly connected.
NOTE
• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When  placing the monitor in a "Portrait" position, settings of your graphics board need to be changed. Refer to the 
manual of the graphics board for details.
  
						

							27Chapter 3  Setting Monitor
3-5. Setting Language [Language]
This function allows you to select a language for the adjustment menu or displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese
Procedure
1. 
C
 hoose  menu from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
C

hoose a language with 
 or .
4.
 
P

ress 
 to exit the adjustment.
3-6. Setting the Display Position of the Adjustment Menu  [Menu Position]
Adjust the menu position using the following procedure.
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect a position with 
 or .
4.
 
P

ress 
 to exit the adjustment.
3-7. Enable/Disable DDC/CI communication
This function allows you to enable/disable the DDC/CI communication. ( page 45)
Procedure
1.
 
P
 ress 
 to turn off the monitor.
2.
 
P

ress 
 holding  down at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose  from the  menu, and press .
4.
 
Se

lect “On” or “Off ” with 
 or , and press .
5.
 
Se

lect “Finish” with 
 or .
The Optional Settings menu is closed.
NOTE
• You can check the DDC/CI setting in the  menu.
  
						

							28Chapter 3  Setting Monitor
3-8. Enable/Disable Auto Sharpness [Auto Sharpness]
By enabling Auto Sharpness outlines will be adjusted according to the displayed image which can 
improve its feel and texture.
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “On” or “Off ” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
NOTE
• The extent of adjustment depends on the set up value of [Outline Enhancer].
3-9. Restoring the Default Setting
There are two types of Reset. One is to reset the color adjustment only to the default settings, and the 
other is to reset all the settings to the default settings.
Attention
• After resetting, you cannot undo the operation.
NOTE
• For main default settings, refer to “Main default settings (factory settings)” on page 41 .
● To reset color adjustment values [Color Reset]
Only the adjustment values in the current mode will revert to the default settings (factory settings).
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu and press 
.
3.
 
Se

lect “Execute” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
The color adjustment values revert to the default settings.
● To reset all adjustments to the factory default settings [All Reset]
Reset all adjustments to the factory default settings.
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “Execute” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
All setting values revert to the default settings.
  
						

							29Chapter 4  Power Saving Function
Chapter 4 Power Saving Function
4-1. Setting the Power Saving [Power Save]
This function allows you to set the monitor into the power saving mode according to the PC status.
When the monitor enters the power saving mode, no image is displayed on the screen.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the 
monitor.
•
 
D
 evices connected to the USB port (upstream and downstream) work when the monitor is in power saving 
mode or when the power button of the monitor is Off. Therefore, power consumption of the monitor varies with 
connected devices even in the power saving mode.
Power Save is compliant with the following standards for the respective signal inputs.
signal inputs Standard
Analog signal VESA DPMS
Digital signal DVI DVI DMPM
DisplayPort DisplayPort Standard V1.1a
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “On” or “Off ” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
Power Saving System
The monitor enters the power saving mode in conjunction with the PC settings.
PC Monitor Power Indicator
Operating  Operating Blue
Power saving  STAND-BY SUSPENDED
OFF Power saving
Orange
4-2. Setting Power Indicator [Power Indicator]
The brightness of the power indicator (blue) when the screen is displayed can be adjusted (default setting 
is set to light up when power is turned on, and brightness is set to 4).
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect the indicator brightness “Off ” or in the range from 1 to 7 with 
 or  as desired.
4.
 
P

ress 
 to exit the adjustment.
  
						

							30Chapter 4  Power Saving Function
4-3. Setting Monitor’s Automatic Brightness Adjustment [Auto EcoView]
The sensor on the lower side of the monitor detects the environmental brightness to adjust the screen 
brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “On” or “Off ” with 
 or .
4.
 
P

ress 
 to exit the adjustment.
4- 4. Setting the automatic power off function [Eco Timer]
This function allows you to switch the setting to turn off the monitor automatically after a specified time 
has passed at the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 45 min, 1-5h)
Procedure
1.
 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
Se

lect “Off ” or time to turn off the monitor with 
 or .
4.
 
P

ress 
 to exit the adjustment.