Home > Eizo > Monitor > Eizo Flexscan S2411w Users Manual

Eizo Flexscan S2411w Users Manual

Here you can view all the pages of manual Eizo Flexscan S2411w Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 31

29Chapter 5  Reference
Attention
•  Never use any solvents or chemicals, such as thinner, benzene, wax, 
alcohol, and abrasive cleaner, which 
may damage the cabinet or LCD 
panel.
NOTE
•  Optional ScreenCleaner is recommended for cleaning the panel 
surface.
5-2 Cleaning
Clean the monitor periodically to keep the monitor clean and extend its \
life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
•  Clean the LCD panel with a soft cloth such as cotton cloth or...

Page 32

30Chapter 5  Reference
5-3 Specifi cations
LCD Panel 24.1-inch (610 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Vertical 178°, Horizontal 178°(CR:10 or more)
Dot Pitch 0.270mm
Horizontal Scan Frequency Analog: 24-94kHz (Automatic) Digital: 31-76kHz
Vertical Scan Frequency Analog: 49-86Hz (Automatic)  (1600 × 1200: 49-76Hz, 1920 × 1200: 49-61Hz)
Digital: 59-61Hz (VGA TEXT: 69-71Hz) (1080p@50Hz: 49-51Hz)
Resolution 1920 dots × 1200 lines
Max. Dot Clock Analog: 202.5MHz Digital: 162MHz...

Page 33

31Chapter 5  Reference
Main default settings (factory settings)
Analog Input Digital Input
Smoothing 3
FineContrast Mode  Custom
PowerManager VESA DPMS DVI DMPM
Screen Size Full Screen
Input Priority 1
Off Timer Disable
Menu Settings Menu Size Normal
Menu Off Timer 45sec
Beep On
Language English
Outside Dimensions
566(22.3)
372(14.6)
294(11.6)
7.3
(0.29) 357.2(14.1)
361.9(14.2)
60.5(2.38) 23.5(0.93)
522(20.6)
24(0.94)
520.4(20.5)
326(12.8)
22.8(0.9)
25
(0.98)116(4.6)
14.5(0.57)
80(3.15)
TILT
ARCSWING...

Page 34

32Chapter 5  Reference
Connector Pin Assignment
• DVI-I connector 
 123
4
56
78
910 11 12
1314 15
16
19 20 21
17 18 22 23 24C1C2C3C4
C5
Pin No.SignalPin No.SignalPin No.Signal 
1 TMDS Data 2- 11 TMDS Data1/3 Shield 21 NC*
2 TMDS Data 2+ 12 NC* 22 TMDS Clock shield
3 TMDS Data2/4 Shield 13 NC* 23 TMDS Clock+
4 NC* 14 +5V Power 24 TMDS Clock-
5 NC* 15 Ground (return for +5V,  Hsync and Vsync)C1 Analog Red
6 DDC Clock (SCL) 16 Hot Plug Detect C2 Analog Green
7  DDC Data (SDA) 17  TMDS Data0- C3 Analog...

Page 35

33Chapter 5  Reference
5-4 Glossary
ClockThe analog input monitor needs to reproduce a clock of the same frequenc\
y as the dot clock of the graphics system in 
use, when the analog input signal is converted to a digital signal for i\
mage display. 
This is called clock adjustment. If the clock pulse is not set correctly\
, some vertical bars appear on the screen.
DVI (Digital Visual Interface) DVI is a digital interface standard. DVI allows direct transmission of t\
he PC’s digital data without loss....

Page 36

34Chapter 5  Reference
ResolutionThe LCD panel consists of numerous pixels of speci fi ed size, which are illuminated to form images. This monitor 
consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are illuminated 
as a full screen (1:1).
sRGB (Standard RGB) International standard for “color reproduction and color space” am\
ong peripheral devices (such as monitors, printers, 
digital cameras, scanners). sRGB allows Internet users to closely match\...

Page 37

35Chapter 5  Reference
5-5 Preset Timing
The following table shows factory preset video timing (for analog signa\
l only).
Mode Dot clockFrequency
PolarityHorizontal: kHz
Vertical: Hz
VGA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative
Vertical 59.94 Negative
VGA 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative
Vertical 70.09 Positive
Macintosh 640×480
@67Hz 30.2 MHzHorizontal 35.00 Negative
Vertical 66.67 Negative
Macintosh 832×624
@75Hz 57.3 MHzHorizontal 49.72 Negative
Vertical 74.55 Negative...

Page 38

36Chapter 5  Reference
VESA CVT 1920×1200 193.3 MHzHorizontal 74.56 Negative
Vertical 59.89 Positive
VESA CVT RB 1920×1200154.0 MHz Horizontal 74.04 Positive
Vertical 59.95 Negative
S 2411W -U _U M _E N .in dd   3 6S2411W-U_UM_EN.indd   364/9 /2 007   5 :5 0:3 0 P M4/9/2007   5:50:30 PM 

Page 39

37Chapter 5  Reference
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This 
means that your display is designed, manufactured and tested according t\
o 
some of the strictest quality and environmental requirements in the worl\
d. 
This makes for a high performance product, designed with the user in foc\
us 
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements: Ergonomics●   Good visual ergonomics and...

Page 40

38 
For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of Conformity
We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone:  (562) 431-5011
declare that the product Trade name:  EIZO
Model:  FlexScan S2411W-U
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received,...
Start reading Eizo Flexscan S2411w Users Manual

Related Manuals for Eizo Flexscan S2411w Users Manual

All Eizo manuals