Eizo Flexscan S2411w Users Manual

9Chapter 1  Features and Overview
Information
●  To check settings, usage time, etc. [Information]
Language
●  To set a language to be displayed [Language]
To make useful settings/adjustments
Power-save Settings
●  To set monitor power-saving [VESA DPMS/DVI DMPM]
Set the off timer
●  To set monitor power-off time [Off Timer]  ……………………………………… see page 17
Change the screen size
●  To change screen size [Screen Size]   ……………………………………… see page 19
●  To adjust brightness of non-display area [Border...

10Chapter 2  Settings and Adjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor\
. The following table shows the disk contents and 
the overview of the application software programs.
● Disk Contents
•  Disk contents and software overview
  The disk includes a monitor information file, application software progr\
ams for adjustment, and User’s Manual. Refer to 
“Readme.txt” or the “Readme” file on the disk for software s\
tartup procedures or file access...

11Chapter 2  Settings and Adjustments
2-2 Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on \
the 
preset data of the monitor.
Analog Input
The monitor screen adjustment is used to suppress fl ickering of the screen or 
adjust screen position and screen size correctly according to the PC to \
be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for 
the  fi rst time or when the settings of the PC in use are updated....

12Chapter 2  Settings and Adjustments
NOTE
•  When vertical bars appear on the screen after adjustment, go back to 
“To eliminate vertical bars [Clock].” 
(Clock  → Phase  → Position)
Attention
•  Flickering or blurring may not be 
eliminated depending on your PC or 
graphics board.
NOTE
•  Touch the control button slowly so as not to miss the adjustment point.
• When blurring,  fl ickering or bars 
appear on the screen after adjustment, 
proceed to [Phase] to remove 
fl  ickering or blurring.4  Perform...

13Chapter 2  Settings and Adjustments
●  To adjust extra or cut image [Resolution]This adjustment is available to equalize the resolution shown on the 
Setting menu and the resolution of input signal.
(1)  Choose  from the  menu, and touch 
.
The  menu appears.
(2)  Adjust the vertical resolution with  or , and then horizontal 
resolution with 
 or , and touch .
The adjustment is completed.
Extra image is displayed due to excessive dots.
A part of image is cut due to short dots.
5  Adjust the signal...

14Chapter 2  Settings and Adjustments
2-3 Color Adjustment
Simple adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor bri\
ghtness, 
etc.
● FineContrast Mode
An appropriate display mode is selectable out of six modes.
Mode Purpose
Custom Available for making desired setting.
sRGB Suitable for color matching with sRGB compatible 
peripherals.
External Switches to this External mode when you start up the 
UniColor Pro and perform the simulation. 
Text...

15Chapter 2  Settings and Adjustments
Advanced Adjustments [Adjustment menu]
Independent setting and saving of color adjustment are available for eac\
h 
FineContrast mode.
● To select an appropriate mode for images
✓ : Adjustment available     
−: Invalid for adjustment
Icon Function FineContrast mode
Custom sRGB External Text Picture Movie
Brightness*✓✓ ✓ ✓✓✓
Temperature*✓ −−
✓✓✓
Gamma*✓−−
✓−−
Saturation✓−−
✓✓✓
Hue✓−−
✓✓✓
Gain✓− − −−−
6 Colors✓− − −−−
Enhancer
Contrast  Enhancer✓−−−
✓✓
Outline...

16Chapter 2  Settings and Adjustments
Menu Description Adjustment rangeHue
To produce a desired skin 
color, etc. –100 to 100
Attention
•  This function does not enable to display every color gradation.
Gain
To adjust red, green, and 
blue to a desired color tone 
respectively 0 to 100%
Adjust the respective brightness of 
red/green/blue to make a desired 
color tone. Display an image with 
white or gray background for 
adjustment.
NOTE
•  The values shown in the “%” are available only as reference.
•...

17Chapter 2  Settings and Adjustments
2-4  Off Timer/Power Saving Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a speci fi ed time 
has passed. This function serves to reduce afterimages caused when the monitor 
screen is left on for a long time period without use. Use this function \
when an 
image is displayed throughout the day.
[Off Timer System]
Timer Monitor Power Indicator
ON time (1H - 23H) Operating Blue
Last 15 min. in “ON...

18Chapter 2  Settings and Adjustments
● To set monitor power-saving [VESA DPMS/DVI DMPM]
■ Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PC Monitor Power 
Indicator
Operating Operating Blue
Power 
saving STAND-BY 
SUSPENDED 
OFF Power saving Orange
[Procedure]
(1)  Choose  from the Adjustment menu, and touch 
.
The  menu appears.
(2)  Select “VESA DPMS” with  or , and touch .
The power saving setting is completed.
[Resumption Procedure]
•  Operate the mouse or...