Eizo Flexscan S2201w Users Manual
Here you can view all the pages of manual Eizo Flexscan S2201w Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 31
29Chapter 4 Troubleshooting ProblemsPossible cause and remedy 18. The monitor connected with the USB cable is detected. / USB devices connected to the monitor does not work. • Check whether the USB cable is connected correctly. • Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB port, contact your local dealer. (Refer to the manual of the PC for details.) • Please perform the followings to check the status. • Reboot the PC. • Connect...
Page 32
![Page 32
30Chapter 5 Reference
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.Secure the...](http://img.usermanuals.tech/thumb/1704/51649/w300_eizo_flexscan_s2201w-user-s-manual-31.png "Page 32
30Chapter 5 Reference
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.Secure the...")
30Chapter 5 Reference Chapter 5 Reference 5-1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2 Remove the stand. (Prepare a screwdriver.) Unscrew the four screws securing the unit and the stand with the screwdriver. 3 Attach the monitor to the arm or stand.Secure the...
Page 33
31Chapter 5 Reference Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the LCD panel surface. 5-2 Cleaning Clean the monitor periodically to keep the monitor clean and extend its life. Cabinet Clean the cabinet with a soft cloth dampened with little mild deter gent. LCD Panel • Clean the LCD panel with a soft cloth such as cotton...
Page 34
32Chapter 5 Reference 5-3 Specifications S2001W LCD Panel20.1-inch (510 mm) TFT color LCD with anti-glare hard coating Viewing angle* : Horizontal 170°, Vertical 170° (CR:10 or more) Dot Pitch0.258mm Horizontal Scan FrequencyAnalog: 24-82kHzDigital: 31-65kHz Vertical Scan Frequency Analog: 49-86Hz (Non-interlace) (1280 × 1024: 49-76Hz)(1680 × 1050: 49-61Hz)Digital: 59-61Hz (Non-interlace) (VGA TEXT: 69-71Hz) Resolution1680 dots × 1050 lines Max. Dot ClockAnalog: 150MHzDigital: 120MHz Max. Display...