Eizo Flexscan P1700 Users Manual

English
4. ADJUSTMENT21
4-5. Power-save Setup
NOTE
zDo your part to conserve energy, turn off the monitor when you are finished using 
it. Disconnecting the monitor from the power supply is recommended to save 
energy completely.
This monitor complies with the “VESA DPMS” (p. 31)
[Procedure]
Set the PC’s power saving settings.
[Power saving system] 
Operate the mouse or keyboard to return to a normal screen.
PCMonitorPower Indicator
Operation Operation Green
Power saving STAND-BY
SUSPEND OFFPower saving...

English
225. ATTACHING AN ARM STAND
5. ATTACHING AN ARM STAND
The LCD monitor can be used with an optional arm stand. 
Using our optional arm or stand is recommended. (Ask your local dealer for 
information.)
NOTE
zIf you will use the arm or stand of other manufacturers, confirm the followings to 
the manufacturers before selecting.
–Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant) 
–Supportable Weight: Total weight of the monitor (without stand) and attaching 
equipment such as a cable...

English
5. ATTACHING AN ARM STAND23 4.
Attach an arm stand to the LCD monitor securely.  Attach the 
removed stand cover again to the monitor.
Arm-stand
4 Mounting Screws : M4 x 12 mm
 

English
246. TROUBLESHOOTING
6. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
zNo picture problems →  See No.1 ~ No.2
zImaging problems →  See No.3 ~ No.8
zOther problems →  See No.9
ProblemsPoints to check with Possible Solutions
1. No picture
zIndicator status: Off†Check that the power cord is correctly 
connected. If the problem persists, turn off the 
monitor power for a few minutes, then turn it 
back on and try again.
zIndicator status:...

English
6. TROUBLESHOOTING25
5. Afterimages appear.†Do you use the screen saver or timer when 
displaying the same image for extended 
periods of time?
†Afterimages are particular to LCD monitors. 
Avoid displaying the same image for extended 
periods of time.
6. The screen has defective 
pixels (e.g. slightly light or 
dark).†This is due to the characteristics of the panel 
itself, and not the LCD product.
7. Fingerprints remain on the 
screen.†Leaving the screen white may solve the 
problem.
8. The...

English
267. CLEANING
7. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its 
operation lifetime.
NOTE
zNever use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), 
abrasive cleaners, or other strong solvents, as these may cause damage to the 
cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild 
detergent.  Do not spray wax or cleaner directly into the cabinet. (For details, refer to...

English
8. SPECIFICATIONS27
8. SPECIFICATIONS
LCD Panel 43.2 cm (17.0 inch), TFT color LCD panel with Anti-Glare 
Hard Coating
Viewing Angle: H: 170°, V: 155° (CR ≥ 5)
Dot Pitch 0.264 mm
Horizontal Scan Frequency 24.8 ~ 80 kHz (Automatic) 
Vertical Scan Frequency 50.0Hz ~ 75.1 Hz (Automatic) 
Resolution 1280 dots x 1024 lines
Dot Clock (Max.) 135 MHz
Display Colors 16 million colors (max.)
Display Area 337.9 mm (H) x 270.3 mm (V) (13.3” (H) x 10.6” (V)) 
(Viewable image size: 432  mm (17.0”))
Power...

English
288. SPECIFICATIONS
„Default settings
„Dimensions
Brightness 100%
Color Color Mode Custom
Temperature Off (Normal white ; approx. 6500K)
Gain 100%
Off Timer Disable
Menu Position Center
BrightRegulator Enable
Language English
1(0.04)339.8(13.4)1(0.04)369(14.5)
14(0.55)314(12.4)14(0.55)
3.9(0.15)
272.2(10.7)
3.9(0.15)
385.2(15.2)
231.7(9.1)
192(7.6)42.9(1.69)
59.5(2.34)28.6(1.13)
64.5(2.54)
128(5.0)
78.2(3.08)85.2(3.35)
150(5.9)
305
232(9.1)
75.5(2.97)
17.4(0.69)
14.6(0.57)
mm (inches)
 

English
8. SPECIFICATIONS29
„Pin Assignment
D-Sub mini 15 pin connector
Pin 
No.SignalPin 
No.SignalPin 
No.Signal
1 Red video6 Red ground11 Ground Shorted
2 Green video7 Green ground12 Data (SDA)
3 Blue video8 Blue ground13 H. Sync
4 Ground9 No pin14 V. Sync
5 No pin10 Ground Shorted15 Clock (SCL)
51 3
42
8
7
6 910
12 13 14
1511
 

English
309. GLOSSARY
9. GLOSSARY
Clock
With the analog input signal display, the analog signal is converted to a digital 
signal by the LCD circuitry. To convert  the signal correctly, the LCD monitor needs 
to produce the same number clock pulse as  the dot clock of the graphics system. 
When the clock pulse is not correctly set,  some vertical bars of distortion are 
displayed on the screen.
Color Temperature (Temperature)
Color Temperature is a method to me asure the white color tone, generally...