Eizo Coloredge Cg301w Users Manual

3. Screen Adjustment and Settings
1

3	 Set	the	brightness	of	the	black	area	surrounding	the	displayed	image.
 Set the .
In the "Enlarge" mode or "Full Screen" mode, the outer area (border) i\
s usually black. Select 
 in the  menu and adjust by using .
-. Setting the Orientation of the Adjustment Menu
The orientation of the Adjustment menu can be changed.
[Procedure]
1. Select  in the ScreenManager  menu.
2.  Select  in the  menu.
3.  Use 
 to select between...


4. Troubleshooting

.Troubleshooting
If a problem still remains after applying the suggested remedies, contac\
t your local dealer.
• No-picture problems : See No.1 - No.2
•  Imaging problems : See No.3 - No.9
•  Other problems : See No.10 - No.12
•  USB problems : See No.13 - No.14
ProblemsPossible cause and remedy
1.  No picture
• Power indicator does not light.
•  
Check whether the power cord is connected correctly. If 
the problem persists, turn off the monitor, and then turn 
it on...

4. Troubleshooting


ProblemsPossible cause and remedy
5.Afterimages appear.• 
Use a screen saver or off timer function for a long-time 
image display.
•  
Afterimages are particular to LCD monitors. Avoid 
displaying the same image for a long time.
6.Green/red/blue/white dots or defective dots remain on the 
screen.
•  
This is due to LCD panel characteristics and is not a 
failure.
7.Interference patterns or fingerprints remain on the screen.•  
Leave the monitor with a white screen or a...


5. Reference

. Reference
-1. Attaching an Arm
The LCD monitor can be used with an arm by removing the tilt stand and a\
ttaching the arm stand to the 
LCD monitor.
NOTE
• 
When attaching an arm or stand, follow the instructions of their user’\
s manual.
•  
When using another manufacturer’s arm or stand, confirm the following in advance and select one 
conforming to the VESA standard. Use M4 × 12 mm screws supplied with \
the monitor.
-  
Clearance between the screw holes: 100 mm ×...

5. Reference


-. Cleaning
Periodic cleaning is recommended to keep the monitor looking new and to \
prolong its operation lifetime.
NOTE
• 
Never use thinner, benzene, alcohol, abrasive cleaners, or other strong solvents, as thes\
e may cause 
damage to the cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth u\
sing a mild detergent. Do not 
spray wax or cleaner directly into the cabinet. (For details, refer to \
the manual of the...


5. Reference

-. Specifications
LCD Panel76 cm (29.8 inch), TFT color LCD panel
Surface treatment : Anti-Glare  Hard Coating
Surface hardness : 3H
Response Time : 12ms
Viewing AngleHorizontal : 178°, Vertical : 178°(CR: 10 or more)
Dot Pitch0.2505mm
Horizontal Scan Frequency 26~100 kHz
Vertical Scan Frequency29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 ~ 71 Hz)
Resolution2560 dots x 1600 lines
Display Colors16.77 million colors (max.)
Recommended Brightness120cd/m2 or less  (with color...

5. Reference


Dimensions
1.6
23.6
402.8(15.9)
450(17.7)
23.6
643.3(25.3)689(27.1)
22.91.6
1.6
1.6
179.5(7.1)404.5(15.9)
TILT40°
347.7(13.7)
61.5
629.5(24.8)
5190
588(23.1)628(24.7)
294.5(11.6)100294.5(11.6)
175(6.9)
100
17
405.6(16)
254.7(10)
35°35°
118(4.6)
322.8(12.7)
57138.5(5.5)
240(9.4)
9.5(0.37)
(3.9)
175(6.9)
(3.9)
(2.42)
(0.67)
(0.06)(0.06)
(0.06)
(0.06)
(0.93)
(0.93)
(2.01)(3.54)
(2.24)
SWIVEL
699(27.5)299(11.8)272(10.7)
265(10.4)
209(8.2)
70.5(2.78)
436(17.2)
406.5(16)
458.1(18)...


5. Reference

UpstreamDownstream
Series B 
Connector
Series A 
Connector
Pin Assignment
 •DVI-D Connector
123456789101112131415161920211718222324
SIGNAL1 : Applicable to DualLink
Pin No.SignalPin No.SignalPin No.Signal
1T.M.D.S. Data 2-9T.M.D.S. Data1-17T.M.D.S. Data0-
2T.M.D.S. Data 2+10T.M.D.S. Data1+18T.M.D.S. Data0+
3T.M.D.S. Data2/4 Shield11T.M.D.S. Data1/3 Shield19T.M.D.S. Data0/5 Shield
4T.M.D.S. Data 4-12T.M.D.S. Data 3-20T.M.D.S. Data 5-
5T.M.D.S. Data 4+13T.M.D.S. Data 3+21T.M.D.S....

5. Reference


-. Glossary
DVI (Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the 
signal  transition  method  "TMDS".  There  are  two  kinds  of  DVI  connectors.  One  is  DVI-D  connector 
for digital signal input only. The other is DVI-I connector for both digital and analog signal inputs\
.
DVI DMPM (DVI Digital Monitor Power Management)
The  Power  management  system  for  the  digital...

0
5. Reference
TMDS (Transition Minimized Differential Signaling) 
A signal transition method for the digital interface.
VESA DPMS 
(Video Electronics Standards Association - Display Power Management 
Signaling)
The  acronym  VESA  stands  for  "Video  Electronics  Standards  Association",  and  DPMS  stands  for 
"Display  Power  Management  Signaling".  DPMS  is  a  communication  standard  that  PCs  and  graphics 
boards use to implement power savings on the monitor side.