Eizo Coloredge Cg301w Users Manual

2. Installation
11

3	 Hold	down	the		button	and	press	the		button.
4	 The		menu	will	appear	in	the	middle	of	the	screen.	Press	the	
	buttons	to	select	"Dual	Display"	and	then	press	.
Inputting 10 bit Color Signal
Some graphics boards support 10 bit color signal input.
How to set
1	 Connect		the	[SIGNAL1]	signal	input	connector	and	the	computer	using	the	[DD200DL-BK]	signal	cable.	
After connecting the cable connectors, tighten the screws of the connect\
ors to secure the coupling.
Connectors on...

1
2. Installation

-. Making Use of USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connec\
ting to a USB compliant PC 
or another hub, the monitor functions as a hub to which the USB complian\
t peripherals can be easily 
connected.
Required system environment
• 
PC equipped with USB ports or another USB hub connected to the USB compl\
iant PC
•  
Windows 2000/XP/Vista // Mac OS 9.2.2 and Mac OS X 10.2 or later
•  
USB Cable (MD-C93,...

3. Screen Adjustment and Settings
1

. Screen Adjustment and Settings
-1. Basic Operation and Functions
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast  
mode easily.
NOTE
•The Adjustment menu and the FineContrast menu cannot be displayed at the\
 same time.
1	 Entering	the	ScreenManager
Press  once to display the main menu of the ScreenManager. 
2	 Making	Adjustments	and	Settings
1. Select the desired sub menu icon using  and press ....

1
3. Screen Adjustment and Settings

Functions
The following table shows all the ScreenManager's adjustment and setting\
 menus. 
Main menuSub menuReference
ScreenSmoothing3-7. Displaying Lower Resolutions
Color(Custom)*1Brightness3-2. Color Adjustment
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Reset
PowerManagerDVI DMPM3-3. Power-save Setup
OFF
OthersScreen Size3-7. Displaying Lower Resolutions
Border Intensity
Input SignalSet the input signal selection of automatic or manual.
Off TimerSet...

3. Screen Adjustment and Settings
1

-. Color Adjustment
Simple Adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor bri\
ghtness, etc.
To select FineContrast mode
Directly pressing -/$% allows you to select the best suited mode for screen display from 4 Fin\
eContrast 
modes; Custom, sRGB, EMU, and CAL.  
Press  to exit the menu.
Tips
• The Adjustment menu and the FineContrast menu cannot be displayed at the\
 same time.
FineContrast Mode...

1
3. Screen Adjustment and Settings

Advanced Adjustments[Adjustment menu]
Color settings of each FineContrast mode can be adjusted and saved by us\
ing the  menu of the 
Adjustment menu.
Adjustment	Items
The adjustable items and displayed icons on the  menu depend on t\
he selected FineContrast 
mode.
       " 
√ ": Settable/Adjustable " - ": Fixed at the factory
IconsFunctionsFineContrast Mode
CustomsRGBEMUCAL
Brightness*√ √ ーー 
Temperature*√ーーー
Gamma*√ーーー
Saturation √ーーー
Hue√ー...

3. Screen Adjustment and Settings
1

Adjustment	Contents
MenuFunction DescriptionsAdjustable range
BrightnessTo set the brightness of the screen0~100%
Tips
• The values shown in the “%” are available only as reference.
TemperatureTo set the color temperature4000K~10000K 
in 500 K increments (including 9300 K)
Tips
•  The values shown in the Kelvin are available only as a reference tool.
•  While color temperature is adjusted,  is adjusted automatically according to the 
color temperature.
•...

1
3. Screen Adjustment and Settings

-. Power-save Setup
The  menu in the ScreenManager enables to set the power-save setup.
NOTE
• 
Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting 
the monitor from the power supply is recommended to save energy complete\
ly.
•  
Even if the monitor is in a power saving mode, USB compliant devices fun\
ction when they are 
connected to the monitor's USB (both the upstream and the downstream po\
rts)....

3. Screen Adjustment and Settings
1

-. Off Timer
The off timer function causes the monitor to automatically enter a power\
 off state after a predetermined 
amount of time has lapsed. This function was created to reduce Afterimag\
e characteristics that are 
particular to LCD monitors when the monitor screen is left on for a long\
 period without use.
[Procedure]
1. Select  in the ScreenManager  menu.
2.  Select 
"Enable" and touch the Right and Left directing switches to adjust...

0
3. Screen Adjustment and Settings

-. Power Indicator Setting
Light off the power indicator. This function is available for the multiple panels settings.
[Procedure]
1. Select  in the ScreenManager  menu.
2.  Select "Disable".
-. Displaying Lower Resolutions
The lower resolutions are enlarged to full screen automatically. Using the  function in the 
 menu enables to change the screen size.
NOTE
• 
When "Single Link/10bit" is selected on the  menu and \
10bit...