Eizo Coloredge Cg242w Users Manual

5. Reference
1

Weightwith standApprox. 10.7 kg (23.6 lbs.)
without standApprox. 7.1 kg (15.7 lbs.)
with hoodApprox. 11.5 kg (25.4 lbs.)
Movable rangeHeight 
adjustable 
stand
Tilt: 
Swivel: 
Adjustable height: 
Rotation: 
40° Up, 0° Down
35° Right, 35° Left
82 mm (3.23 inch)
90° (clockwise)
Environment 
Conditions
TemperatureOperating: Storage:0°C ~ 35°C (32°F ~ 95°F) -20°C ~ 60°C (-4°F ~ 140°F)
HumidityOperating: Storage:30% to 80% R.H. Non-condensing 30% to 80% R.H. Non-condensing...


5. Reference

Dimensions
566(22.3)520.4(20.5)233(9.2)100(3.9)233(9.2)
100(3.9)
133.5(5.3)
133.5(5.3)
82(3.23)
56.3(2.22)85(3.35)
326(12.8)367(14.4)
TILT 40°
190(7.5)
35°35°
456~538(18~21.2)
230(9.1)
272.5(10.7)
399.5(15.7)
287.5(11.3)
30.4(1.2)
SWIVEL
398.5(15.7)
45.6(1.8)
571(22.5)
462~544(18.2~21.4)183.5(7.2)
373(14.7)
347.6(13.7)
229(9.0)236(9.3)
151(5.9)
355(14.0)
uinit: mm (inch)
 

5. Reference


Pin Assignment
•DVI-I Connector
123456789101112131415161920211718222324
C1C2C3C4C5
Pin No.SignalPin No.SignalPin No.Signal
1 TMDS Data 2- 11 TMDS Data1/3 Shield21NC*
2TMDS Data 2+12NC*22TMDS Clock shield
3TMDS Data2/4 Shield13NC*23TMDS Clock+
4NC*14+5V Power24TMDS Clock-
5NC*15Ground (return for +5V, 
Hsync and Vsync)
C1Analog Red
6DDC Clock (SCL)16Hot Plug DetectC2Analog Green
7DDC Data (SDA)17TMDS Data0-C3Analog Blue
8Analog Vertical Sync18TMDS Data0+C4Analog Horizontal Sync...


5. Reference

-. Glossary
Clock
With	the 	analog 	input 	signal 	display, 	the 	analog 	signal 	is 	converted 	to 	a 	digital 	signal 	by 	the 	LCD	
circuitry.	 To	convert	 the	signal	 correctly,	 the	LCD	 monitor	 needs	to	produce	 the	same	 number	 clock	
pulse	 as	the	 dot	 clock	 of	the	 graphics	 system.	When	the	clock	 pulse	is	not	 correctly	 set,	some	 vertical	
bars	of	distortion	are	displayed	on	the	screen.
DisplayPort
VESA 	provides 	the 	digital 	interface 	standard 	for...

5. Reference


Resolution
The	LCD	 panel	 consists	 of	a	fixed	 number	 of	pixel	 elements	 which	are	illuminated	 to	form	 the	screen	
image.	 The	display	 panel	of	this	 monitor	 consists	of	1920	 horizontal	 pixels	and	1200	 vertical	 pixels.	
At	a	resolution	of	1920	x	1200	,	images	are	displayed	as	a	full	screen(1:1).
sRGB (Standard RGB)
"International	Standard	for	Red,	Green,	and	Blue	color	space"	A	color	space	was	defined	with	the	aim	
of	 the	 color	 matching	 between...


6. APPENDIX/ANHANG/ANNEXE

. APPENDIX/ANHANG/ANNEXE
Preset Timing Chart for Analog input 
Timing-Übersichten für Analog Eingang 
Synchronisation des Signaux pour Analog numerique
NOTE
•	Based	on	the	signal	diagram	shown	below	factory	presets	have	been	registered	in	the	monitor's	
microprocessor.
•	Der	integrierte	Mikroprozessor	des	Monitors	unterstützt	werkseitige	Standardeinstellungen	(siehe	
hierzu	die	nachfolgenden	Diagramme).
• 	Signaux 	ont 	été 	enregistrés 	en 	usine 	dans 	le...

6. APPENDIX/ANHANG/ANNEXE


ModeDot Clock MHz
FrequenciesSync PolarityHorizontal:kHz Vertical:Hz
VESA CVT 1920 × [email protected] MHzHorizontal74.56NegativeVertical59.89Positive
VESA CVT RB 1920×1200 60Hz154.00 MHzHorizontal74.04PositiveVertical59.95Negative
 

8
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This 
means that your display is designed, manufactured and tested according t\
o 
some of the strictest quality and environmental requirements in the world. 
This makes for a high performance product, designed with the user in foc\
us 
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
●	 Good	visual	ergonomics	and	image	quality	in...

9
For	U.S.A.	,	Canada,	etc.	(rated	100-120	Vac)	Only
FCC Declaration of Conformity
We, the Responsible Party EIZO	NANAO	TECHNOLOGIES	INC.
5710	 Warland	Drive,	Cypress,	CA 	90630
Phone:		(562)	431-5011
declare that the product Trade	name:		EIZO
Model:		ColorEdge	CG242W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received,...

0
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser	Monitor	ist	für	Bildschirmarbeitsplätze	vorgesehen.	Wenn	nicht	der	zum	Standardzubehör	gehörige
Schwenkarm	verwendet	wird,	muss	statt	dessen	ein	geeigneter	anderer	Schwenkarm	installiert	werden.	Bei	der
Auswahl	des	Schwenkarms	sind	die	nachstehenden	Hinweise	zu	berücksichtigen:
Der	Standfuß	muß	den	nachfolgenden	 Anforderungen	entsprechen:
a)	Der	 Standfuß	 muß	eine	ausreichende	 mechanische	Stabilität	zur	Aufnahme	 des...