Eizo Coloredge Cg242w Users Manual

3. Setting Monitor
1

-. Using Off Timer
The	off	timer	function	causes	the	monitor	to	automatically	enter	a	power	off	state	after	a	predetermined	
amount	of	time	has	lapsed.	With	this	function	you	can	reduce	power	consumption	for	unused	time	
regardless	of	the	setting	of	the	PC.	Use	this	function	when	the	monitor	screen	is	left	on	for	a	long	period	
without	use.
[Procedure]
1.	Select		in	the	Adjustment	menu		menu.
2.	Select	"Enable	and	touch	the	Right	and	Left	directing	switches	to...


3. Setting Monitor

-. Setting Power Indicator
Use	the	function	to	keep	the	power	indicator	without	light	while	the	monitor	is	operational.	
(The	power	indicator	is	set	by	default	to	light	when	the	power	is	turned	on.)
[Procedure]
1.	Select		in	the	Adjustment	menu		menu.
2.	Select	 "Enable"	or	
"Disable".
-. Changing Orientation
This	function	allows	you	to	change	the	orientation	of	the	Adjustment	menu	when	using	the	monitor	
screen	in	vertical	display...

4.Troubleshooting


.Troubleshooting
If	a	problem	still	remains	after	applying	the	suggested	remedies,	contact	your	local	dealer.
•	No-picture	problems	:	See	No.1	-	No.2
•	Imaging	problems	:	See	No.3	-	No.14
•	Other	problems	:	See	No.15	-	No.18
•	USB	problems	:	See	No.19	
ProblemsPossible cause and remedy
1.  No picture
•
 Power indicator does not light.
•
 Check whether the power cord is connected correctly. If 
the problem persists, turn off the monitor, and then turn 
it on again a few...


4.Troubleshooting

ProblemsPossible cause and remedy
• The message below shows that the input signal is out of 
the specified frequency range. (Such signal frequency is 
displayed in red.)
	 Example:
•
 Check whether the signal setting of your PC matches 
the resolution and the vertical frequency settings for the 
monitor (page 11).
•
 Reboot the PC.
•
 Select an appropriate display mode using the graphics 
board’s utility. Refer to the manual of the graphics board 
for details.
fD:  Dot...

4.Troubleshooting


ProblemsPossible cause and remedy
11.Afterimages appear.• Use a screen saver or off timer function for a long-time 
image display.
•
 Afterimages are particular to LCD monitors. Avoid 
displaying the same image for a long time.
12.Green/red/blue/white dots or defective dots remain on 
the screen.
•
 This is due to LCD panel characteristics and is not a 
failure.
13.Interference patterns or fingerprints remain on the 
screen.
•
 Leave the monitor with a white screen or a...


5. Reference

. Reference
-1. Attaching an Arm
The	LCD	monitor	can	be	used	with	an	arm	by	removing	the	tilt	stand	and	attaching	the	arm	stand	to	the	
LCD	monitor.	Use	an	arm	or	stand	of	EIZO	option.
Note
•	When	attaching	an	arm	or	stand,	follow	the	instructions	of	their	user’s	manual.
• 	When	using	another	manufacturer’s	arm	or	stand,	confirm	the	following	in	advance	and	select	one	
conforming	to	the	VESA	standard.
- 	Hole	spacing	on	the	arm	mounting:	100	mm	x	100	mm
-	Thickness	of...

5. Reference


-. Connecting Two PCs to the Monitor
Two	PCs	can	be	connected	to	the	monitor	through	the	DVI-I	connector	and	DisplayPort	connector	on	
the	back	of	the	monitor.
Connection examples
PC 1 PC 
(Ex.1)DigitalDVI
Signal Cable 
(FD-C39 enclosed)
Signal Cable 
(PP200 optional)
DisplayPortDigital
(Ex.2)Analog
D-Sub 
mini 15 
pin
Signal Cable 
(FD-C16 enclosed)
Selecting input signal
Switch	the	input	signal	with	.	Input	signal	switches	each	time		is	pressed.	When	the	signal...

8
5. Reference

-. Utilizing USB (Universal Serial Bus)
This	monitor	provides	a	hub	which	supports	the	USB	standard.	When	connecting	to	a	USB	compliant	PC	
or	another	hub,	the	monitor	functions	as	a	hub	to	which	the	USB	compliant	peripherals	can	be	easily	
connected.
Required system environment
•	PC	equipped	with	USB	ports	or	another	USB	hub	connected	to	the	USB	compliant	PC
•	Windows	2000/XP/Vista	//	Mac	OS	9.2.2/Mac	OS	X	10.2	or	later
•	USB	Cable	(MD-C93,	enclosed)
Note
•	The	USB	hub...

5. Reference
9

-. Setting Range of Frequency
Depending	upon	your	operating	environment,	it	may	be	necessary	to	set	the	frequency	that	corresponds	
to	your	graphics	board.	If	you	install	it	for	the	first	time	or	change	environment,	set	the	monitor.
NOTE
•	Refer	to	the	manual	of	the	graphics	board.
•These	environment	described	below	can	be	set	regardless	of	whether	or	not	the	computer	is	running.
How to set
1	 Press		to	turn	off	the	unit.
2	 Press		again	while	pressing	.
3	 Select	the...

0
5. Reference

-. Specifications
LCD PanelSize61 cm (24.1 inch)
Surface 
treatment
Hard Coating
Surface 
hardness
3H
Response 
Time
Approx. 12 ms
Viewing 
Angle
Horizontal : 178°, Vertical : 178°(CR: 10 or more)
Dot Pitch0.270 mm
Horizontal Scan 
Frequency
Analog24 ~ 130 kHz (Automatic)
Digital26 ~ 78 kHz
Vertical Scan 
Frequency
Analog47.5 ~ 120 Hz (Automatic)
Digital23.75 ~ 63 Hz (VGA TEXT: 69 ~ 71 Hz)
Resolution1920 dots x 1200 lines
Dot Clock 
(Max.)
Analog204 MHz
Digital164.5 MHz...