Eizo Coloredge Cg241w Users Manual
Have a look at the manual Eizo Coloredge Cg241w Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Eizo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5. Reference 31 5-3. Cleaning Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.) LCD Panel • The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper. • If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening part of a cloth with water to enhance its cleaning power.
32
5. Reference
5-4. Specifications
LCD Panel61 cm (24.1 inch), TFT color LCD panel
Surface treatment : Anti-Glare Hard Coating
Surface hardness : 3H
Response Time : 16ms
Viewing Angle Horizontal : 178°, Vertical : 178°
(CR: 10 or more)
Dot Pitch0.270mm
Horizontal Scan
Frequency
Analog24~94 kHz (Automatic)
Digital26~78 kHz
Vertical Scan
Frequency
Analog 47.5~86Hz (Automatic) (1600x1200 : 47.5 ~ 76Hz)
(1920x1200 : 47.5 ~ 61Hz)
Digital47.5 ~ 63 Hz (VGA TEXT: 69 ~ 71 Hz)
Resolution1920 dots x 1200 lines
Dot Clock
(Max.)
Analog202.5MHz
Digital164.5MHz
Display Colors
16.77 million colors (max.)
Recommended Brightness
120cd/m2 or less (with color temperature of between 5000K to 6500K)
Display Area
518.4 mm (H) × 324.0 mm (V) (20.4" (H) x 12.8" (V))
Power Supply 100-120/200-240 VAC±10%, 50/60 Hz, 1.1 A/0.55A (with USB)
Power Consumption
Max.
Max. (Normal)
Power Saving Mode:110 W (with USB) :100W (without USB) :Less than 2 W (for single signal input without USB)
Input Signal ConnectorDVI-I connector (Applicable to HDCP)×2
Analog Input Signal (Sync)Separate, TTL, Positive/Negative
Composite, TTL, Positive/Negative
Analog Input Signal (Video)0.7 Vp-p / 75 ohms, Positive
Input Signal (Digital)TMDS (Single Link)
Signal
registrationAnalog 45 (Factory preset: 30)
Digital10 (Factory preset: 0)
Plug & Play VESA DDC 2B / EDID structure 1.3
Dimensionswith stand566 mm (W) x 456 ~ 538 mm (H) x 230 mm (D) (22.3"(W) x 18" ~ 21.2" (H) x 9.1"(D))
without stand566 mm (W) x 367 mm (H) x 85 mm (D) (22.3"(W) x 14.4" (H) x 3.35"(D))
with hood571 mm (W) x 462 ~ 544 mm (H) x 347.6 mm (D) (22.5"(W) x 18" ~ 21.4" (H) x 13.7"(D))
Weight
with stand11.0kg (24.3 lbs.)
without stand7.4kg (16.3 lbs.)
with hood11.8kg (26 lbs.)
Environment
Conditions Temperature
Operating
Storage : 0°C ~ 35°C (32°F ~ 95°F)
: -20°C ~ 60°C (-4°F ~ 140°F)
Operating
Storage : 30% to 80% R.H. Non-condensing
: 30% to 80% R.H. Non-condensing
Pressure Operating
Storage : 700 to 1060 hPa.
: 200 to 1060 hPa.
USBstandardUSB Specification Revision 2.0
USB port Upstream port x 1
Downstream port x 2
Communication
Speed480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Power Supply Downstream: 500 mA for each (max.)
Downloaded from ManualMonitor.com Manual•
5. Reference 33 Default settings Brightness37% Smoothing3 Temperature 6500K FineContrast Mode Custom PowerManager Analog input : VESA DPMS Digital input:DVI DMPM Screen Size Full Input Priority 1 Off Timer Disable Menu Settings Menu Size Normal Menu Off Timer 45 seconds BrightRegulator Disable BeepOn LanguageEnglish Signal Selection Normal Beeper settings Short beepAdjustment menu item selsected. Adjustment menu parameter adjusted to minimum or maximum limit. pressed When locked or unlocked with Long beep pressed Adjustment menu data-save executed. 4 short beeps Monitor not connected correctly. PC turned off. Monitor received unsupported signal frequency. 2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer. The power will be off within fifteen minutes. Dimensions ������������ ���������� ������������������������ ����������� ���������� ���� ����� ������������������������������������� �������� ������ ��������� ������������������������� ������ ����������������� ��� ������� ����������� ������������ ����������� ��������������������� ����������������� �������������������� �������������������������������������������� ������������ ����� ����������� ������������ ����������mm(inch) Downloaded from ManualMonitor.com Manual•
34
5. Reference
Pin Assignment
•DVI-I Connector
123456789101112131415161920211718222324
C1C2C3C4C5
Pin No.SignalPin No.SignalPin No.Signal
1 TMDS Data 2- 11 TMDS Data1/3 Shield21NC*
2TMDS Data 2+12NC*22
TMDS Clock shield
3TMDS Data2/4 Shield13NC*23 TMDS Clock+
4NC*14 +5V Power24TMDS Clock-
5NC*15Ground (return for +5V,
Hsync and Vsync)C1Analog Red
6 DDC Clock (SCL)16Hot Plug DetectC2Analog Green
7 DDC Data (SDA)17TMDS Data0-C3Analog Blue
8Analog Vertical Sync18TMDS Data0+C4Analog Horizontal Sync
9TMDSData1-19TMDS Data0/5 ShieldC5Analog Ground(analog
R,G,&B return)
10TMDS Data1+20NC*
(*NC: No Connection)
•USB Port
No.SignalRemarks
1VCC
Cable power
2- Data Serial data
3+ Data Serial data
4Ground Cable Ground
Upstream
Downstream
Series B
Connector Series A
Connector
Downloaded from ManualMonitor.com Manual•
5. Reference 35 5-5. Glossary Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some vertical bars of distortion are displayed on the screen. DVI (Digital Visual Interface) A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D connector for digital signal input only. The other is DVI-I connector for both digital and analog signal inputs. DVI DMPM (DVI Digital Monitor Power Management) The Power management system for the digital interface. The "Monitor ON" status (operation mode) and the "Active Off" status (power-saving mode) are indispensable for the DVI-DMPM as the monitor's power mode. Gain Adjustment Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed through the color filter of the LCD panel. Red, green and blue are the three primary colors. The colors on the monitor are displayed by combining these three colors. The color tone can change by adjusting the illumination amount passed through each color's filter. Gamma Generally, the relationship that the light intensity values of a monitor change nonlinearly to the input signal level is called "Gamma Characteristic". On the monitor, low gamma values display the whitish images and high gamma values display the high contrast images. HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable to HDCP system. Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation.
36 5. Reference Resolution The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO CG241W display panel consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200 , all pixels are displayed as a full screen. sRGB (Standard RGB) "International Standard for Red, Green, and Blue color space" A color space was defined with the aim of the color matching between applications and hardware devices, such as monitors, scanners, printers and digital cameras. As a standard default space, sRGB allows Internet users to closely match colors. Temperature Color Temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while at lower temperatures it appears somewhat red. Computer monitors generally give best performance at high temperature settings. 5000 K: Slightly reddish white. 6500 K: Warm-white tone, similar to white paper or daylight. 9300 K: Slightly bluish white. TMDS (Transition Minimized Differential Signaling) A signal transition method for the digital interface. VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for "Display Power Management Signaling". DPMS is a communication standard that PCs and graphics boards use to implement power savings on the monitor side.
6. APPENDIX/ANHANG/ANNEXE 37 6. APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique NOTE • Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor. • Der integrierte Mikroprozessor des Monitors unterstützt werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme). • Signaux ont été enregistrés en usine dans le microprocesseur du moniteur, conformément au diagramme de synchronisation ci-dessous. Mode Dot Clock MHzFrequencies Sync Polarity Horizontal:kHz Vertical:Hz VGA 640×480@60Hz 25.2 MHz Horizontal31.47 Negative Vertical59.94 Negative VGA TEXT 720×400@70Hz 28.3 MHz Horizontal31.47 Negative Vertical70.09 Positive Macintosh 640×[email protected] MHz Horizontal35.00 Negative Vertical66.67 Negative Macintosh 832×[email protected] MHz Horizontal49.73 Negative Vertical74.55 Negative Macintosh 1152×[email protected] MHzHorizontal68.68 Negative Vertical75.06 Negative Macintosh 1280×[email protected] MHz Horizontal74.76 Positive Vertical74.76 Positive VESA 640×[email protected] MHz Horizontal37.86 Negative Vertical72.81 Negative VESA 640×[email protected] MHz Horizontal37.50 Negative Vertical75.00 Negative VESA 640×[email protected] MHz Horizontal43.27 Negative Vertical85.01 Negative VESA 800×[email protected] MHz Horizontal35.16 Positive Vertical56.25 Positive VESA 800×[email protected] MHz Horizontal37.88 Positive Vertical60.32 Positive VESA 800×[email protected] MHz Horizontal48.08 Positive Vertical72.19 Positive VESA 800×[email protected] MHz Horizontal46.88 Positive Vertical75.00 Positive VESA 800×[email protected] MHz Horizontal53.67 Positive Vertical85.06 Positive VESA 1024×[email protected] MHz Horizontal48.36 Negative Vertical60.00 Negative VESA 1024×[email protected] MHz Horizontal56.48 Negative Vertical70.07 Negative VESA 1024×[email protected] MHz Horizontal60.02 Positive Vertical75.03 Positive VESA 1024×[email protected] MHz Horizontal68.68 Positive Vertical85.00 Positive VESA 1152×[email protected] MHzHorizontal67.50 Positive Vertical75.00 Positive VESA 1280×[email protected] MHz Horizontal60.00 Positive Vertical60.00 Positive VESA 1280×[email protected] MHzHorizontal63.98 Positive Vertical60.02 Positive VESA 1280×[email protected] MHz Horizontal79.98 Positive Vertical75.03 Positive VESA 1280×[email protected] MHz Horizontal91.15 Positive Vertical85.03 Positive VESA 1600×[email protected] MHz Horizontal75.00 Positive Vertical60.00 Positive VESA 1600×[email protected] MHz Horizontal81.30 Positive Vertical65.00 Positive Downloaded from ManualMonitor.com Manual•
38 6. APPENDIX/ANHANG/ANNEXE ModeDot Clock MHzFrequencies Sync Polarity Horizontal:kHz Vertical:Hz VESA 1600×[email protected] MHz Horizontal87.50 Positive Vertical70.00 Positive VESA 1600×[email protected] MHzHorizontal93.75 Positive Vertical75.00 Positive VESA CVT 1680×1050 60Hz146.3 MHzHorizontal65.29 Negative Vertical59.95 Positive VESA CVT 1920×1200 60Hz193.3 MHzHorizontal74.56 Negative Vertical59.89 Positive VESA CVT RB 1920×1200 60Hz154.0 MHzHorizontal74.04 Positive Vertical59.95 Negative Downloaded from ManualMonitor.com Manual•
39 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics Ô Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Ô Energy-saving mode after a certain time - beneficial both for the user and environment Ô Electrical safety Emissions Ô Electromagnetic fields Ô Noise emissions Ecology Ô The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000 Ô Restrictions on Ô chlorinated and brominated flame retardants and polymers Ô heavy metals such as cadmium, mercury and lead. The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com
40 For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible PartyEIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: ColorEdge CG241W is in conformity with Part 15 of the FCC Rules. Operation of this pr oduct is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the following measures. * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (Enclosed) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.