Eizo Coloredge Cg232w Users Manual

2. Adjusting Screen
11
2. Adjustin\f Screen
2-1. Settin\f Screen Res\aolution
Compatible Resolutions/Frequ\aencies
For details on compa\ltible resolutions, refer to “Compatible Resolutions/Frequencies” in the Setup 
Manual.
Settin\f Resolution
When \fou connect the mon\litor to the PC and\l find that the reso\llution is improper, or when \fou want to 
change the resoluti\lon, follow the procedure bel\low. When using video e\lditing equipment, \lrefer to the 
instruction manual for the equipment.
Windows...

12
2. Adjusting Screen
2-2. Settin\f SDI Input \aSi\fnal
Note
•
 These settings can\l onl\f be made when u\lsing the SD\b input \lsignal.
The f

ollowing settings are l\located on the  menu of the Adjustmen\lt 
menu.
Settin\f Pseudo Inte\arlace
This displa\f method shows the interlaced signals as th\le\f are and gives the video a CRT-like displa\f 
effect.
Tips
•
  can be set un\lder these conditio\lns:
-  The input signal is\l 1080i and the sca\ln t\fpe on the  menu is set to “\bnterlace”.
-  The input...

2. Adjusting Screen
13
The following settings are l\located on the  menu of the Adjustmen\lt menu.
Adjustin\f Sharpness
Emphasizes the outline of t\lhe image b\f emphasizing the c\lolor difference 
between the pixels composing the i\lmage and to improve a sense of qualit\l\f and 
materialit\f.
Note
•
  ma\f not be adjustable for certain settings. (Refer to "4. Troubleshooting").
[Procedure]
1. From the  m\lenu on the Adjustmen\lt menu, select .
2.
 Adjust the setting\l with  (0 to 10).
Adjustin\f...

14
2. Adjusting Screen
2-3. Displa\bin\f Screen Correct\al\b (Analo\f Input Onl\b)
Note
•
 Allo

w the LCD monitor t\lo stabilize for at least 30 minutes before making image a\ldjustments.
The monitor displa\fs the digital inpu\lt image correctl\f b\lased on its pre-se\ltting data.
The monitor screen\l adjustment is use\ld to suppress flickering of the screen \lor adjust screen p\losition 
and screen size correctl\f accordi\lng to the PC to be\l used. 
To use the monitor \lcomfortabl\f, adjust the...

2. Adjusting Screen
15
3 Perform the auto size adjustment a\fain with the analo\f \ascreen adjustment pattern displa\bed.
1. Displa\f Pattern 1 in full screen \lon the monitor usi\lng the “Screen Adjustment\l Utilit\f” or the 
screen adjustment \lpattern files.
2. From the  m\lenu on the Adjustmen\lt menu, select .
3.
 Select 

“Execute” 
The Auto Adjustment fun\lction begins (showing a running status icon\l) to adjust flickering, 
screen position, a\lnd screen size automaticall\f.
4 Adjust b \b usin\f...

16
2. Adjusting Screen(3) The screen positio\ln is incorrect. 
 Use the  adjustmen\lt.
The correct displa\fed position of the\l monitor is decide\ld because the number and the posi\ltion 
of the pixels are fixed. The  adjustmen\lt moves the image to th\le correct position\l.
 
Select  and use 
 to adjust the pos\lition so that the \lentire image is 
displa\fed. \bf vertical bars of disto\lrtion appear after \lfinishing the  adjustmen\lt, return 
to  adjustment and \lrepeat the previousl\f explained...

2. Adjusting Screen
17
2-4. Adjustin\f Color
Simple Adjustment (\aSwitchin\f Color Mode)
Changing the color \lmode enables \fou to set the moni\ltor to the appropr\liate displa\f mode.
Selectin\f Color Mod\ae
Pressing  displa\fs the Color Mode m\lenu at the bottom lef\lt of the screen. Each press of  changes 
through 7 modes. 
Press 
 to exit the menu.
 ->Custom->sRGB->E\lBU->Rec709->SMPTE-C\l->DC\b->CAL
Tips
•
 The Adjustment men\l

u and the Color Mod\le menu cannot be displa\fed at the same tim\le....

18
2. Adjusting Screen
Advanced Adjustments [\aAdjustment menu]
Color settings of e\lach Color mode can \lbe adjusted and sa\lved b\f using the \l menu of the 
Adjustment menu.
\bn the analog input\l, perform the “Range Adjustment”\l before making the colo\lr adjustments. During color 
adjustments, the color mode ca\lnnot be changed. Select the mode in\l advance b\f using 
.
Adjustment Items
The adjustable items and displa\l\fed icons on the  menu depend on the se\llected color mode. 
Regarding the...

2. Adjusting Screen
19
Adjustment Contents\a
MenuFunction Description\as Adjustable ran\fe
Black LevelTo adjust the black level as desired 0 - 32
Brightness
To set the brightness of the sc\lreen 0~100%
Tips
• The v alues shown in the “%” are available onl\f as reference.
Temperature
To set the color tem\lperature 5000K~10000K 
in 500 K increment\ls (including 5400K \land 
9300 K)
Tips
• The v
alues shown in the Kelvin are available onl\f as a reference tool.
•
 W

hile color temperature is adjusted,  is...

20
2. Adjusting Screen
2-5. Chan\fin\f Screen Siz\ae Ratio
The screen size ratio can be selecte\ld using the  function on the\l  menu.
Chan\fin\f Screen Size Ratio for Input Screen
->  Select the .
Select the  in the \l menu and select the sc\lreen size b\f using 
 and 
.
When usin\f DVI/D-SUB input si\fn\aal
Mode Function
EnlargedDispla\fs the picture on t\lhe screen in full, \lirrespective of the picture’s resolution. 
Since the vertical resolution an\ld horizontal resolution ar\le enlarged at same...