Eizo Coloredge Ce240w Users Manual

3. ScreenManager 
21

3-4. Useful Functions
Adjustment Lock
Use the "Adjustment Lock" function to prevent any accidental changes.
Locked function• Adjustments and settings in the ScreenManager
• Auto Adjustment Switch
Unlocked function
• Selecting of the FineContrast mode by the Directing Switch / Adjustments
• Brightness adjustment by the Directing Switch
• Input signal selection switch
[How To lock]
1. Turn off the monitor's power by touching the power switch.
2. And then touch the power...

22
3. ScreenManager

Power Indicator Setting
Light off the power indicator. This function is available for the multiple panels settings.
[Procedure]
1. Select  in the ScreenManager  menu.
2. Select "Disable".
EIZO Logo Appearing Function
When turning on the monitor, the EIZO logo is displayed for a while. If you desire to display or 
undisplay this logo, use this function. (Default is logo appearing.)
[To undisplay]
1. Turn off the monitor's power by touching the power switch.
2. Touch the...

4. ADJUSTMENT
23

4. ADJUSTMENT
4-1. Screen Adjustment
NOTE
• Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments.
The monitor displays the digital input image correctly based on its pre-setting data.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also 
for adjusting the screen to its proper position. There is only one correct position for each display mode. 
It is also recommended to use the ScreenManager...

24
4. ADJUSTMENT

3  Adjust by using  menu in the ScreenManager.
(1)Vertical bars appear on the screen 
Use the  adjustment. 
Select the  and eliminate the vertical bars by using the Right and Left of the Directing 
switches. Do not continuously touch the Directing switches, as the adjustment value will change 
quickly and make it difficult to locate the most suitable adjustment point. If the horizontal 
flickering, blur or bars appear, proceed to  adjustment as follows.
(2)Horizontal flickering, blurring...

4. ADJUSTMENT
25

(4)Screen image is smaller or larger than the actual screen images. 
Use the  adjustment. 
Adjustment is needed when the input signal resolution and the resolution now being displayed 
are different. 
Select  and confirm if the resolution now being displayed is the same as the input 
resolution. If it is not, adjust the vertical resolution using the Up and Down switches and adjust 
thehorizontal resolution using the Right and Left switches.
4  Adjust the output signal range (Dynamic...

26
4. ADJUSTMENT

4-2. Displaying Lower Resolutions
The lower resolutions are enlarged to full screen automatically. Using the  function in the 
 menu enables to change the screen size.
1  Enlarge the screen size when displaying a low resolution.
Select the . 
Select the  in the others menu and select the screen size by using the up and down 
switches.
ModeFunction
FullDisplays the picture on the screen in full, irrespective of the picture's resolution. 
Since the verticalresolution and the...

4. ADJUSTMENT
27

3  Set the brightness of the black area surrounding the displayed image.
Set the .
In the  mode or  mode, the outer area (border) is usually black. Select 
 in the  menu and adjust by using the right and left switches.
Border
4-3. Color Adjustment
Color settings of each FineContrast mode can be adjusted and saved by using the  menu of the 
ScreenManager.
In the analog input, perform the "Range Adjustment" before making the color adjustments. During color 
adjustments, the...

28
4. ADJUSTMENT

Adjustment Contents
MenuFunction DescriptionsAdjustable range
BrightnessTo set the brightness of the screen0~100%
Tips
• The values shown in the “%” are available only as a reference tool.
• Directly touching the Up and Down switches also adjusts the brightness. Touch the 
Enter switch to save and exit the settings after the adjustment.
Temperatur
eTo set the color temperature4000K~10000K 
in 500 K increments (including 9300 K)
Tips
• Setting the value to “Off ” presents the natural...

4. ADJUSTMENT
29

4-4. Power-save Setup
The  menu in the ScreenManager enables to set the power-save setup.
NOTE
• Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting 
the monitor from the power supply is recommended to save energy completely .
• Even if the monitor is in a power saving mode, USB compliant devices function when they are 
connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power 
consumption of the...

30
5. MAKING USE OF USB (Universal Serial Bus) 

5. MAKING USE OF USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant 
PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily 
connected.
Required system environment
• PC equipped with USB ports or another USB hub connected to the USB compliant PC
• Windows 98/2000/Me/XP // Mac OS 8.5.1 or later
• USB Cable (MD-C93, enclosed)
NOTE
• The...