Eizo Coloredge Ce240w Users Manual
Here you can view all the pages of manual Eizo Coloredge Ce240w Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 11
2. CABLE CONNECTION 11 2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency) in accordance with the charts below. Tips • It is recommended to use this monitor in the digital signal input. • When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input CE210W Resolution...
Page 12
12 2. CABLE CONNECTION Digital Input The monitor supports the following resolutions only. CE210W ResolutionFrequencyDot ClockRemarks 640×48060Hz 120 MHz (Max.) VGA 720×40070Hz VGA TEXT 800×60060HzVESA 1024×76860HzVESA 1280×96060HzVESA 1280×102460Hz VESA 1680×105060HzVESA CVT RB (Reduced Blanking) CE240W ResolutionFrequencyDot ClockRemarks 640×48060Hz 162 MHz (Max.) VGA 720×40070Hz VGA TEXT 800×60060HzVESA 1024×76860HzVESA 1280×96060HzVESA 1280×102460Hz VESA 1600×120060HzVESA 1680×105060HzVESA CVT,...
Page 13
2. CABLE CONNECTION 13 Analog Input Signal CableConnector of the PCPC Signal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15 pin Input Connector(monitor) / DVI • Standard graphics card • Power Macintosh G3 (Blue & White) / Power Mac G4 (VGA) Digital Input Signal CableConnector of the PCPC Signal Cable (FD-C39 enclosed) Video Output Connector / DVI Input Connector (monitor) / DVI • Digital Graphics card • Power Mac G4/G5 (DVI) NOTE • The monitor is not compatible with a Power Mac...
Page 14
14 2. CABLE CONNECTION 4 Lead the power cord and signal cable into the cable holder at rear of the monitor. NOTE • The cables are recommended to lead with slight sag for the smooth motion of the stand. 5 Adjust the "height", "front and back position" and "angle" of the monitor. 1. Adjust the height of the monitor. To heighten, push the monitor backward. To lower, pull the monitor forward. 2. Adjust the position and angle of the monitor. To adjust the angle of the monitor,...
Page 15
2. CABLE CONNECTION 15 6 Turn on the monitor's Power switch and then turn on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the " 7. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor. Tips • When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. • Adjust brightness of the screen...
Page 16
16 2. CABLE CONNECTION 2-3. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connecting Examples SIGNAL1SIGNAL2 (Ex.1)Analog D-Sub mini 15 pinSignal Cable (FD-C16 enclosed) Signal Cable (FD-C39 enclosed) DVIDigital (Ex.2)Analog D-Sub mini 15 pinSignal Cable (FD-C16 enclosed) Signal Cable (FD-C16 optional) D-Sub mini 15 pin Analog (Ex.3)Digital DVISignal Cable(FD-C39 enclosed) Signal Cable...
Page 17
2. CABLE CONNECTION 17 Priority settingPerformance 1If signals from both inputs are present, the monitor gives preference to Signal 1 in the following cases. • When the power of the monitor is turned ON. • When the signal input to Signal 1 is changed even if active input was Signal 2. 2 If signals from both inputs are present, the monitor gives preference to Signal 2 in the following cases. • When the power of the monitor is turned ON. • When the signal input to Signal 2 is changed even if active...
Page 18
18 3. ScreenManager 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. NOTE •Main Menu and FineContrast Menu cannot be activated at the same time. 1 Entering the ScreenManager Touch the Enter switch once to display the main menu of the ScreenManager. 2 Making Adjustments and Settings 1. Select the desired sub menu icon using the Directing switch and touch the Enter switch. The sub...
Page 19
3. ScreenManager 19 3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only. Main menuSub menu Reference ScreenClock* 4-1. Screen Adjustment.. Phase* Position * Resolution* Range Adjustment* Smoothing Signal Filter* Color(Custom)*1Brightness 4-3.Color Adjustment. Temperature Gamma Saturation Hue Gain 6 Colors Reset PowerManager...
Page 20
20 3. ScreenManager Tips • When the main menu of ScreenManager is displayed on the screen, the FineContrast Menu cannot be activated. Exit Press the Enter switch to exit the menu. FineContrast Mode Selectable FineContrast modes are as follows. ModeDescription sRGB To display the screen images based on those original colors (ex. over the Internet) CustomTo adjust the color settings according to your preference CALThe mode only for calibration software Color Adjustment of the Mode Settings , and...