Eiki Projector LC-XNS2600 User Manual

							21
Turn off the projectorBasic operation
Power off ?
“Power off ? ” disappears after 4 seconds.
1.
 
Press the POWER button on top control 
or on the remote control, and “Power off?”     
appears on the screen.
2.   Then, press the POWER button again in 4 
seconds.  The  POWER  indicator  starts  to     
flash  red,  and  the  cooling  fans  keep  running      
(You can select the level of fans’ quietness     
and running speed.). Now you can unplug     
the AC power cord even if the fans are still     
running.
3.  When the projector has cooled down enough     
to be turned on again, the POWER indicator     
stops flashing. 
 Note:
•   When  the  On  start  function  is  “On”,  this 
projector is turned on automatically by  
connecting  the  AC  power  cord  to  an  AC 
outlet .
•   The running speed of cooling fans is 
changed according to the temperature inside 
the projector.
•   Do not put the projector in a case before it is 
cooled enough.
•   If  the  POWER  indicator  flashes  or  emits  a  
red light, see “Power Indicator”.
•   While  the  POWER  indicator  is  flashing,  the 
lamp is being cooled down and the projector 
cannot be turned on. Wait until the POWER 
indicator turns red to turn on the projector 
again.
•   The fan rotation will terminate directly if the 
AC  power  cord  is  unplugged  immediately 
after the projector is turned off.
•   The projector can be turned on after the  
POWER  indicator  turns  red.  The  waiting 
time to restart will be shortened when the 
normal power-off processing for fan cooling 
is completed, comparing with the time the 
AC  power  cord  is  immediately  unplugged 
after the power-off. To maintain the lamp life, once you turn 
the projector on, wait at least 5 minutes 
before turning it off.
Do not operate the projector 
continuously without rest.
Continuous use may result in shortening 
the lamp life.Turn off the projector and 
let it stand for about an hour in every 24 
hours.  
						

							22
How to operate the screen menu
Remote control
Screen menu Top control
MEMU
MENU
OK/INPUT 
OK 
  

 
1  
Press the MENU button on the top control or 
the remote control to display the screen menu.
2   Press 
 buttons to select an entry in the 
main menu and then press OK  button to enter 
the submenu.
3   Press
 buttons to select your required 
item, and then press OK button to set or enter 
required item.
4   Press 
 buttons to adjust settings or switch 
among the items. Press the OK button for 
corresponding operation and then press MENU 
button return to the submenu.
5   Press MENU button to return to the previous 
menu. Press MENU button  again to exit the 
screen menu.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Auto PC adj.             
Fine sync                             16
Total dots                          1056
Horizontal                           216
Vertical                              27
Display area H                       800
Display area V                       600
Reset 
Mode free
Store
Basic operation
The projector can be adjusted or set via the 
on-screen menu, each main menu can be 
divided into several levels of submenus, and 
submenus are also divided into several levels 
of sub-submenus.
For each adjustment and setting procedure, 
refer to the respective sections in this manual.  
						

							23
Menu bar
① PC adjust
Adjust computer parameters to match with VGA input signal format:  Auto PC adj, Fine sync,  
Total dots, Horizontal, Vertical, Display area H, Display area V.
②  Display
-   Screen Size: select the projecting image screen size.  
If a computer is selected as a signal source, the following setup option\
s for the image size are         
available:  Normal, Wide, Custom. 
If video equipment is selected as a signal source, the following setup o\
ptions for the image 
size are available:  Normal,Wide or Custom.
- Keystone: select keystone function to correct image keystone distortio\
n.
- Project Mode: select a project mode among  Front, Rear, Celing/Front and Ceiling/Rear.
- Menu Position: set the menu's position on the screen. 
- Background Display: set the background display color for project scree\
n.
- System: select a system signal format to match the input source.
③  Color adjust
-   Image  mode:the available image modes is Normal, Natural, Cinema, Blackboard (green), 
Colorboard or User Image.
-   Image color adjust:  
If a computer is selected as a signal source, the following image adjust\
ing options are 
available:  Contrast, Brightness, Color temp., White balance (R/G/B)  and Sharpness. 
If video equipment is selected as a signal source, the following image a\
djusting options are 
available:  Contrast, Brightness, Color, Tint, White balance (R/G/B), Sharpness  and 
Progressive .
④  Setting
Configure basic operation settings of the projector:  On start, Standby mode, High land, 
Lamp control, Cooling fast, Closed caption, Key lock, Iris, Terminal  and Sound.
⑤  Expand
Configure expand operation settings of the projector:  Language, Auto setup, Logo, Security, 
Power management, Filter counter, Pattern, Network and Factory default. 
⑥  Info.
Display the system information of the projector. Main menu
Sub menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Auto PC adj.             
Fine sync                             16
Total dots                          1056
Horizontal                           216
Vertical                              27
Display area H                       800
Display area V                       600
Reset 
Mode free
Store①
②
③
④
⑤
⑥
Basic operation  
						

							24
Auto setup function
Adjust zoom and foucus
This function is available just by pressing the  
AUTO button on the remote control. The system 
then automatically performs various settings in 
the setup menu, including input source search 
and auto pc adjust. Rotate the zoom ring to zoom in or zoom out the 
image.
Rotate the focus ring to adjust the focus of the 
image.
Zoom ring
(back)
Remote control AUTO Focus ring
(front)
Basic operation  
						

							25
VolumeRemote controlMUTE
VOLUME +/- 
Menu operation
Volume menu
Volume
Press  to increase the volume and  to 
decrease  the volume.
Mute
Press
 button to switch the mute function On/
Of f. 1 Press the MENU button to display the screen 
   menu.  Press 
 button to select the Setting 
   menu icon. Press OK to enter the submenu 
   e nt r y.
2 Press 
 button to select Volume and then 
    press OK button.
3 Press 
 button to select Volume or Mute to  
   adjust.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
On Start                    Off
Standby Mode                Normal
High Land                   Off
Lamp Control
Cooling Fast                Normal
Closed caption              Off
Key Lock   
Iris                        Off
Terminal                    VGA OUT
Sound                       
    Volume   12
    Mute     Off
Basic operation
Direct operation
VOLUME +/- 
Press the VOLUME +/- button on the remote 
control to adjust the volume.
MUTE
Press the MUTE button on the remote control 
and select On to turn off the audio temporarily. 
To restore the audio to its previous level, press 
the MUTE button again and select Off  or press 
the VOLUME+/– buttons. 
Mute function is also effective for AUDIO OUT 
jack.  
						

							26
Remote control operation
INPUT 
Press INPUT button on the remote control to 
select the input source.
FREEZE 
Press FREEZE button to freeze the picture on 
the screen. To cancel the freeze function, press 
the FREEZE button again or press any other 
button.MUTE
Press MUTE button on the remote control to turn 
off the volume. Press MUTE button again or any 
other buttons to cancel mute function.
VOLUME +/-  
Press image VOLUME +/- button on the remote 
control to increase or decrease the volume.
INPUT 
Remote control
FREEZE
VOLUME +/-  MUTE 
Basic operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the 
buttons enables you to make the desired operation quickly without calling up the screen menu.

Note:
   See the next page for the description of other    
   buttons.  
						

							27
D.ZOOM+ 
Press D.ZOOM+ button, the screen menu will 
disappear, while the information on digital zoom 
+ appears. You can press Select to zoom in the 
image size, and press  ▲▼ ◄ ► to move the image 
horizontally and vertically.
The moving is effective only when the image is 
larger than the size of the screen.
D. ZOOM-  
Press D.ZOOM- button, the screen menu will 
disappear, while the information on digital zoom - 
appears. Press OK button to zoom out the image 
size.
To exit the “digital zoom +/-“mode, press any 
button except the D.ZOOM+/- and the OK button. 
To return to normal size, select “ Screen size” in  
"Display" menu to adjust screen size, or press 
    button to move the image horizontally or 
vertically.  
BLANK 
BLANK 
Press BLANK button to black out the image. To 
restore to normal, press the BLANK button again 
or press any other button. 
The screen changes each time you press the 
button as follows:
Black out → Normal → Black out → Normal ...
“Blank” disappears after 4 seconds if there is 
no other button operation.
TIMER 
Blank ImageBlank
02：02
D.ZOOM +/- 
Basic operation
TIMER 
Press TIMER button. The timer display “00:00” 
appears on the screen and the timer starts to 
count time (00:00 – 59:59).
To stop the Timer, press TIMER button again, 
and then the Timer display disappears.
Timer display
Remote control  
						

							28
VGA IN 1
VGA IN 2
Input select
Direct Operation
Press HDMI, VGA, COMOPNENT, S-VIDEO or 
VIDEO button on the remote control to select 
HDMI, VGA IN, Component, S-video or Video 
as input source.When input source is from 
computer connected to VGA 
IN 1 terminal with VGA cable,  
please select VGA IN 1.When input source is from 
computer connected to VGA IN 
2/VGA OUT terminal with VGA 
cable, please select VGA IN 2.
 Note:
  -  When the Input Search function is set to On in the Auto setup function, the input signal will be 
    searched automatically.
  - When VGA IN 2/VGA OUT terminal is used as VGA OUT, VGA IN 2 can not be selected.  Menu operation
1 Press MENU button on the remote control or 
   top control to display the input select menu. 
2 Press 
 button to select HDMI,VGA IN, 
   Component, S-video or Video , then press 
   OK button. Top control
Input select menu
Remote control
INPUT 
INPUT VIDEO
HDMI
COMPONENT VGA 
S-VIDEO
    HDMI    
    VGA IN 1
    VGA IN 2
    Component
    S-video
    Video  
HDMIWhen input source is from  
equipment connected to HDMI  
terminal with HDMI cable,  
please select  HDMI.
Component
   S-video
Video
Select it when the input source 
is from the video equipment 
connected to COMPONENT 
terminal with a RCA cable.
Select it when the video input 
signal is connected to S-VIDEO 
terminal. Select it when the video input 
signal is connected to VIDEO 
IN terminal.  
						

							29
Auto PC adj.
PC Adjust
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and 
Vertical to conform to your computer.
Store Menu operation
The system parameters adjusted in the Auto PC 
adj. can be stored in the projector.
√ Note:
  -  Total dots and horizontal & ver tical positions of some computers cannot be fully adjusted with 
this Auto PC adj. function. When the image is not provided properly with this function, manual 
adjustments are required.
  -   The Auto PC adj. cannot be operated when 480i, 576i, 480p, 576p, 720p, 1035i, or 1080i is selected 
in the System menu of computer inputx.
Auto PC adj. PC adjust Menu
1   Press MENU button on the remote control to  
   display screen menu. Press   button to 
   select PC adjust, then press OK button.
2   Press   button to select Auto PC adj., then  
press OK button.PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Auto PC adj.             
Fine sync                             16
Total dots                          1056
Horizontal                           216
Vertical                              27
Display area H                       800
Display area V                       600
Reset 
Mode free
Store  
						

							30
PC Adjust
Some computers employ special signal formats which may not be tuned by Multi-scan system of this 
projector. Manual PC Adjustment is provided for you to precisely adjust several parameters to match 
those signal formats. The projector has five independent memory areas to store those parameters 
manually adjusted, which allows you to recall the setting for a specific computer.
1 Press MENU button on  the  remote control 
   to display screen menu. Press  button 
   to select PC adjust,then press OK button.
2  Press   button to select  the item you    
want to adjust ,then press   button to 
adjust the data.  Manual PC adj. menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Auto PC adj.             
Fine sync                             16
Total dots                          1056
Horizontal                           216
Vertical                              27
Display area H                       800
Display area V                       600
Reset 
Mode free
Store
Manual PC adj.
Fine syncPress buttons to adjust the value, eliminating 
a flicker from the image displayed (from 0 to 31).
Total dots
Press  buttons to adjust the number of total 
dots in one horizontal period to match your PC 
image.
Horizontal
Press  to adjust the horizontal picture 
position.
Vertical
Press  to adjust the vertical picture position.
Display area H
Press to adjust the horizontal area displayed 
by the projector.
Display area V
Press to adjust the vertical area displayed by 
the projector.
ResetTo reset the adjusted data, select Reset and 
press OK. A confirmation box appears and then 
select Yes. All adjustments will return to their 
previous figures.
Mode freeTo clear the adjusted data, select Mode free and 
then press  or OK. Move  or OK to highlight 
the Mode you want to clear and then press OK.
StoreTo store the adjusted data, select Store and then 
press  or OK. Move the red arrow indicator to 
one of the Mode 1 to 5 in which you want to store, 
and then press OK. √ Note:
   
If you select 480i, 576i, 480p, 576p, 720p, 1 0 3 5 i    
  or 1080i from the system menu, the functions of 
  both horizontal image and ver tical image will be    
  disabled.