Eiki Projector LC-XNS2600 User Manual

41
Setting
Key lock
This function allows you to use the Key lock 
and PIN code lock function to set the security 
for the projector operation.
Select "Key lock" and press OK button, 
then press  button to select the item you 
desire . 
 Of f ......................Unlock.
 Projector  ...........  Lo c k  t he  o p e r at i o n                            
of the.top control.  
To unlock, use the  
remote control. 
 Remote Control ..  Lock the operation 
of the remote 
control. 
To unlock, use the...

42
Sound
Iris
Terminal
This function is used to increase the contrast 
of the image.
  On....Enable Iris function, increase the 
           contrast of the image.
  Off....Disable Iris function.
The VGA IN 2/ VGA OUT terminal can be used 
as computer input or monitor output.Press 
▲  to select input or output.
   VGA IN 2  ....... VGA 2 input
   VGA OUT..........Monitor out
This item is used to adjust the volume.
   Sound...Press
 
  
button to increase the 
                 volume, press  
  
button...

43
Auto setup
Language
Expand
The projector has Expand menu that allows you to set the other various expand functions 
described as follows.Expand menu
Auto setup
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Language
Auto setup
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
                Auto setup
Input search               On
Auto PC adj.               On
Auto keystone...

44
Logo
Expand
This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code 
lock and Logo PIN code change functions.
Logo PIN code LockThis function prevents an unauthorized person from changing the screen logo.
  Off ......The screen logo can be changed freely from the Logo menu.
  On ......The screen logo cannot be changed without a Logo PIN code.
If you want to change the 
Logo PIN code lock setting, press OK button and the Logo PIN code dialog 
box appears. Enter a...

45
Security
This function allows you to use the PIN code 
lock and PIN code change functions to set the 
security for the projector operation.
PIN code lock
This function prevents the projector from 
being operated by unauthorized persons 
and provides the following setting options for 
s e c u r i t y.
  Of f ............Unlocked.
   On ........... Enter the PIN code ever y time 
                     turning on the projector.If you 
                     want to change PIN code lock...

46
Filter counter
Expand

Note:
   Factory default setting is 5 min.
This function is used to set a frequency for 
filter cleaning.
When the projector reached a specified time 
between cleanings, a Filter warning icon 
appears on the screen, notifying the cleaning 
is necessary. After cleaning the filter, be sure 
to select RESET and set the timer. The Filter 
warning icon will not turn off until the filter 
counter is reset. Filter counter.......The time that filter used....

47
Te s t  P a t t e r nExpand
This function is used to set the internal test 
signal:Gray scale 1,Gray scale 2,Gray scale 
3,Gray scale 4, Color bar, Red, Green, Blue, 
Cross hatch,White,Black and Gray.
NetworkTest PatternPC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
               Test Pattern
  Off
  Gray scale 1
  Gray scale 2
  Gray scale 3
  Gray scale 4
  Color bar
  Red
  Green
  Blue
  Cross hatch
Network
Function : PC controls projector via LAN.
Preparation:
1. Equipments:...

48
Expand
Factory default
This function returns all setting values except 
for the User logo, PIN code lock, Logo PIN 
code lock, Lamp counter and Filter counter to 
the factory default settings.
Network setting
DHCP                    Off
 SetCancel
IP address              0    0     0     0 
Subnet                  0    0     0     0  
Gateway                 0    0     0     0 
DNS                     0    0     0     0 
Move                                Select                               Back...

49
Infomation
The information menu is used to detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control to 
display the screen menu. Press  to select  
Info., then press OK button, the information 
menu will appear as the right picture.
The information below will display in 
information menu. Info. menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Input                    VGA IN 1
                         1024x768@60
H-sync freq....

50
Network Control
Connecting to the LAN
Computer operation
Connect the LAN cable to the LAN terminal of 
the projector.1.Turn on the computer.
2.   Set the network parameters, refer to pages 
4 7.
3.   Set DHCP as Off to obtain IP address 
automatically.  LAN cable
Computer
Projector
Router LAN cable
Network setting
DHCP                    Off
 SetCancel
IP address              0    0     0     0 
Subnet                  0    0     0     0  
Gateway                 0    0     0     0 
DNS...