Eiki Projector Lc Xb40 User Manual
Have a look at the manual Eiki Projector Lc Xb40 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
–Make sure you have properly connected the projector to peripheral equipm\
ent as described on page15-17.
– Make sure all equipment is connected to AC outlet and the power is turne\
d on.
– When you operate the projector with a computer and it does not project a\
n image, restart the computer.
Appendix
Problem: –Solutions
No power –Plug the power cord of the projector into the AC...](http://img.usermanuals.tech/thumb/1702/89364/w64_eiki-lc-xb40-manual_d-55.png "Page 56
56
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
–Make sure you have properly connected the projector to peripheral equipm\
ent as described on page15-17.
– Make sure all equipment is connected to AC outlet and the power is turne\
d on.
– When you operate the projector with a computer and it does not project a\
n image, restart the computer.
Appendix
Problem: –Solutions
No power –Plug the power cord of the projector into the AC...")
![Page 60
60
Appendix
Check the indicators for projector condition.
• • • green.• • • red• • • off
• • • blinks green.
✽When the life of the projection lamp draws to an end, the LAMP REPLACE i\
ndicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a ne\
w one promptly. Reset the lamp
replacement counter after replacement of the lamp. See page 54 and 55.
The projector is off. (The AC power cord is unplugged.)
The projector is preparing for stand-by or the projection lamp...](http://img.usermanuals.tech/thumb/1702/89364/w64_eiki-lc-xb40-manual_d-59.png "Page 60
60
Appendix
Check the indicators for projector condition.
• • • green.• • • red• • • off
• • • blinks green.
✽When the life of the projection lamp draws to an end, the LAMP REPLACE i\
ndicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a ne\
w one promptly. Reset the lamp
replacement counter after replacement of the lamp. See page 54 and 55.
The projector is off. (The AC power cord is unplugged.)
The projector is preparing for stand-by or the projection lamp...")
![Page 61
61
Appendix
Compatible Computer Specifications
The projector can basically accept the signal from all computers with th\
e V, H-Frequency mentioned below
and less than 140 MHz of Dot Clock.
ON-SCREENDISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
MAC 191024 x 76860.2475.08
SXGA 11152...](http://img.usermanuals.tech/thumb/1702/89364/w64_eiki-lc-xb40-manual_d-60.png "Page 61
61
Appendix
Compatible Computer Specifications
The projector can basically accept the signal from all computers with th\
e V, H-Frequency mentioned below
and less than 140 MHz of Dot Clock.
ON-SCREENDISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
MAC 191024 x 76860.2475.08
SXGA 11152...")
![Page 62
62
Appendix
Technical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 13.15” x 3.07” x.9.17” (334 mm x 78 mm x 233 mm) (Not includ\
ing adjustable feet)
Net Weight 7.5 lbs (3.3 kg)
Feet Adjustment 0˚ to approx. 9˚
Panel Resolution
LCD Panel System 0.8 TFT Active Matrix type, 3 panels
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N
High...](http://img.usermanuals.tech/thumb/1702/89364/w64_eiki-lc-xb40-manual_d-61.png "Page 62
62
Appendix
Technical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 13.15” x 3.07” x.9.17” (334 mm x 78 mm x 233 mm) (Not includ\
ing adjustable feet)
Net Weight 7.5 lbs (3.3 kg)
Feet Adjustment 0˚ to approx. 9˚
Panel Resolution
LCD Panel System 0.8 TFT Active Matrix type, 3 panels
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N
High...")
![Page 63
63
Appendix
Model No.
COMPONENT-VGA Cable : AH-98771
SCART-VGA Cable :AH-98881
Soft Carrying Case :AH-82201
The parts listed below are optionally available. When ordering those pa\
rts, give the item name and Model No.
to the sales dealer.
Optional Parts
Accessories
Owners Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
PIN Code Label
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards....](http://img.usermanuals.tech/thumb/1702/89364/w64_eiki-lc-xb40-manual_d-62.png "Page 63
63
Appendix
Model No.
COMPONENT-VGA Cable : AH-98771
SCART-VGA Cable :AH-98881
Soft Carrying Case :AH-82201
The parts listed below are optionally available. When ordering those pa\
rts, give the item name and Model No.
to the sales dealer.
Optional Parts
Accessories
Owners Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
PIN Code Label
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards....")
![Page 65
65
Appendix
Write down the PIN code number in the column below and keep it with this\
manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service\
station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector...](http://img.usermanuals.tech/thumb/1702/89364/w64_eiki-lc-xb40-manual_d-64.png "Page 65
65
Appendix
Write down the PIN code number in the column below and keep it with this\
manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service\
station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector...")
61 Appendix Compatible Computer Specifications The projector can basically accept the signal from all computers with th\ e V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. ON-SCREENDISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz) VGA 1640 x 48031.4759.88 VGA 2720 x 40031.4770.09 VGA 3640 x 40031.4770.09 VGA 4640 x 48037.8674.38 VGA 5640 x 48037.8672.81 VGA 6640 x 48037.5075.00 MAC LC13640 x 48034.9766.60 MAC 13640 x 48035.0066.67 MAC 16832 x 62449.7274.55 MAC 191024 x 76860.2475.08 SXGA 11152 x 86464.2070.40 SVGA 1800 x 60035.15656.25 SVGA 2800 x 60037.8860.32 SVGA 3800 x 60046.87575.00 SVGA 4800 x 60053.67485.06 SVGA 5800 x 60048.0872.19 SVGA 6800 x 60037.9061.03 SVGA 7800 x 60034.5055.38 SVGA 8800 x 60038.0060.51 SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 ON-SCREEN DISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz) XGA 101024 x 768 XGA 111024 x 768 XGA 121024 x 768 XGA 131024 x 768 62.0477.07 XGA 141024 x 768 61.0075.70 XGA 151024 x 768 35.52286.96 (Interlace) 46.9058.20 XGA 81024 x 768 47.0058.30 XGA 91024 x 768 58.0372.00 SXGA 41280 x 1024 63.4879.35 36.0087.17 (Interlace) 63.3459.98 SXGA 51280 x 1024 SXGA 61280 x 1024 SXGA 71280 x 1024 63.7460.01 71.6967.19 SXGA 101280 x 960 81.1376.107 60.0060.00 XGA 11024 x 768 XGA 41024 x 768 48.3660.00 XGA 61024 x 768 XGA 71024 x 768 56.47670.07 48.5060.02 44.0054.58 SXGA 81280 x 1024 SXGA 91280 x 1024 63.9860.02 79.97675.025 XGA 51024 x 76860.3174.92 VGA 7640 x 48043.26985.00 575i––––––––15.62550.00 (Interlace)480i––––––––15.73460.00 (Interlace) SXGA 121152 x 90071.4075.60 SXGA 111152 x 90061.2065.20 SVGA 10800 x 60032.7051.09 SXGA 131280 x 102450.0086.00 (Interlace) SXGA 21280 x 102462.5058.60 SXGA 31280 x 102463.9060.00 XGA 21024 x 76868.67784.997 XGA 31024 x 76860.02375.03 SXGA 181280 x 102446.4386.70 (Interlace) SXGA 191280 x 102463.7960.18 SXGA 141280 x 1024 SXGA 151280 x 1024 SXGA 161280 x 1024 SXGA 171152 x 900 50.0094.00 (Interlace) 63.3760.01 76.9772.00 61.8566.00 MAC1280 x 96075.0075.08 MAC1280 x 1024 480p–––––––– 575p–––––––– 80.0075.08 31.4759.88 1080i–––––––– 31.2550.00 33.7560.00 (Interlace) 720p–––––––– 1035i–––––––– 45.0060.00 33.7560.00 (Interlace) 1080i––––––––28.12550.00 (Interlace) SXGA +11400 x 105063.9760.19 MAC211152 x 87068.6875.06 WXGA 21360 x 768 WXGA 31376 x 768 WXGA 41360 x 768 WXGA 61360 x 768 47.7060.00 WXGA 71360 x 768 48.3660.00 WXGA 81360 x 768 56.1672.00 47.77659.87 60.28974.893 WXGA 11366 x 768 68.63384.837 UXGA 41600 x 120093.7575.00 UXGA 11600 x 1200 UXGA 21600 x 1200 UXGA 31600 x 1200 75.0060.00 81.2565.00 87.570.00 48.3660.00 SXGA +21400 x 105065.3560.12 SXGA +31400 x 105065.1259.90 SXGA 201280 x 102491.14685.024✳ 1 ✳1 ✳1 ✳1 ✳1 ✳1When selecting these modes, PC adjustment can be limited.
62 Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.15” x 3.07” x.9.17” (334 mm x 78 mm x 233 mm) (Not includ\ ing adjustable feet) Net Weight 7.5 lbs (3.3 kg) Feet Adjustment 0˚ to approx. 9˚ Panel Resolution LCD Panel System 0.8 TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359,296 (1,024 x 768 x 3 panels) Signal Compatibility Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i Scanning Frequency H-sync. 15 kHz ~ 100 kHz, V-sync. 50 ~ 100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 33” to 300” Throw Distance 4.3’–32.8’ (1.3 m–10.0 m) Projection Lens F1.7–2.1 lens with f26.7 mm–32.0 mm with manual zoom and focus Projection Lamp 300 W Interface Video Input Jack RCA Type x 1 S-Video Input Jack Mini DIN 4 pin x 1 Audio Input Jacks RCA Type x 2 Computer Input 1 TerminalAnalog RGB (Mini D-sub 15 pin) Terminal X 1 Computer Input 2 / Component Input TerminalAnalog RGB (Mini D-sub 15 pin) Terminal X 1 Computer/ Component Audio Input JackMini Jack (stereo) x 1 Monitor Output Analog RGB (Mini D-sub 15 pin) Terminal X 1 Service Port Connector Mini DIN 8 pin x 1 Audio Output Jack Mini Jack (stereo) x 1 (Variable) Audio Internal Audio Amp 1.0W RMS Built-in Speaker 1 speaker, ø1.1 (28mm) Power Voltage and Power Consumption AC 100 ~ 120 V (4.9A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada\ ) AC 200 ~ 240 V (2.2A Max. Ampere), 50 / 60 Hz (Continental Europe)\ Operating Environment Operating Temperature 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) Storage Temperature 14 ˚F ~ 140 ˚F (-10˚C ~ 60 ˚C) Remote Control Battery AA or LR6 1.5V ALKALINE TYPE x 2 Operating Range 16.4’ (5m) / ±30˚ Dimensions 1.9”(W) x 0.87”(H) x 5.7”(D) (49mm x 22mm x 145.3mm) Net Weight 3.53 oz (100 g) (including batteries)
63 Appendix Model No. COMPONENT-VGA Cable : AH-98771 SCART-VGA Cable :AH-98881 Soft Carrying Case :AH-82201 The parts listed below are optionally available. When ordering those pa\ rts, give the item name and Model No. to the sales dealer. Optional Parts Accessories Owners Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even tho\ ugh 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the \ characteristics of the LCD panels.
64 Appendix Terminal : Mini DIN 8-PIN 12345876 SERVICE PORT CONNECTOR R X D ----- ----- GND RTS / CTS GND GND Serial 1 2 3 4 5 6 7 8 COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Dimensions Red (R/Cr) Input / Output Ground (Horiz.sync.) Green (G/Y) Input / Output ----- Blue (B/Cb) Input / Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 5V Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) DDC data Ground Vert. sync. DDC clock 9 13 10 12 11 14 15 T X D 9.17 (233)5.51 (140) 2.78 (70.5) 3.66 (93) 2.14 (54.3) 13.14 (334) 3.17 (80.5) 5.20 (132) 4.43 (112.5) 5.08 (129) 8.9º MAX Screw Holes for Ceiling Mount Screw: M4 Depth: 0.472 (12.0) Unit: inch (mm) Configurations of Terminals
65 Appendix Write down the PIN code number in the column below and keep it with this\ manual securely. If you forgot or lost the number and unable to operate the projector, contact the service\ station. PIN Code Number Memo Factory default set No: 1 2 3 4*Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid. Put the label below (supplied) on in a prominent place of the projectors body while it is locked with a PIN code. While the projector is locked with the PIN code... PIN Code Lock No. Logo PIN Code Lock No.
A-key to better communications U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern Europe EIKI CZECH spol. s.r.o. Umelecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024 +42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected]ˆ J apan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 W orldWide Website http://www.eiki.com KL6B© 2006 Eiki International, Inc.