Eiki Projector Lc Xb40 User Manual

MULTIMEDIA PROJECTOR
MODELLC-XB40
OWNER’S MANUAL 

2
Features and Design
◆Compact Design
This projector is designed compact in size and
weight.  It is easy to carry and work anywhere you
wish to use.
◆Compatibility
The projector widely accepts various video and
computer input signals including; Computers, 6 Color
systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M,
PAL-N) video, Component video, S-Video and RGB
scart.
Useful Interface;
●  2 Inputs for RGB  (D-sub 15pin) 
●   Monitor Output for RGB (D-sub 15pin) 
●   Audio Output (Mini jack stereo, variable)...

3
Table of Contents
Tr ademarks
Each name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective
corporation.
Features and Design  . . . . . . . . . . . . . . . . . . .2
T able of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To  the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Moving the Projector 6
Installing the Projector in Proper Directions 7...

4
To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
Before installing and operating...

5
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time,...

Moving the Projector
6
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered. 
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken. 
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any...

7
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, pe\
rpendicular to the plane of the screen
as shown in the figure below.
Bottom
Downward (Usual)Front
DownwardBottom
UpwardFront
Upward
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
P ositioning Precautions
Do not tilt the...

Compliance
8
The AC Power Cord supplied with this projector meets the requirement for\
 use in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety featur\
e to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature\...

9
Bottom Back
qZoom Ring
w Infrared Remote Receiver
e Focus Ring
r Projection Lens
t Slide Shutter Lever
y Top Controls and Indicators
u Exhaust Vent
i
!4
!3!2
!1
CAUTION
Hot air is exhausted from the exhaust
vents. Do not put heat-sensitive objects
near this side.
uerty
Fr ont
! 0o
qw
u
oo
!4
i Speaker
o Air Intake Vents
! 0Terminals and Connectors
! 1Power Cord Connector
! 2Lamp Cover
! 3Filter
! 4Adjustable Feet
✽ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the...

10
oS-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.16).
yAUDIO IN
Connect the audio output signal from video
equipment connected to  tor o to this jack. For a
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.16).
u COMPUTER/COMPONENT AUDIO IN
Connect the audio output (stereo) signal from a
computer or video equipment connected to  wor
r to this jack (pp.15, 17).
t VIDEO IN
Connect the composite video output signal to this
jack (p.16)....