Eiki Projector Lc Xb40 User Manual

21
Basic Operation
Menu barPointer
(red frame )
Menu icon
Item data
Press the Point  7 8
buttons to adjust the
value.
SELECT
button
Pointer (red frame )
Press the Point  edbuttons
to move the pointer.
Item
On-Screen Menu
Quit  
Exit this menu.
SELECT button
POINT buttons
Remote ControlMENU button
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Use the Point 
7...

22
Menu Bar
PC System Menu
Used to select
computer
system.  (p.27)
Image Adjust Menu
Used to adjust
computer image. 
[Contrast / Brightness /
Color temp. / White
balance (R/G/B) /
Sharpness / Gamma]  
(pp.32, 33)
Setting Menu
Used to set the
projectors operating
configurations.(pp.42-50)
Sound Menu
Used to adjust
the volume or
mute the sound.
(p.23)
Image Select Menu
Used to select an image
mode among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1 ~ 4.  (p.31)
F or computer source
AV  S ystem...

23
Basic Operation
Rotate the Zoom Ring to zoom in and out.  
Rotate the Focus Ring to adjust the focus of the image.  Zoom Ring
Focus Ring
1
2
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
frame pointer to the Sound Menu icon. 
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume.  The volume dialog
box will appear on the screen for a few seconds.
Press the MUTE button on the remote control to cut off the
sound....

24
Remote Control
Remote Control Operation
For some frequently used operations, using the remote control is advisab\
le.
Just pressing one of the buttons enables you to make the operation, and \
no need for calling up the On-Screen
Menu.
COMPUTER /VIDEO
button 
✔Note:
•See the next page for the other buttons.
Press the FREEZE button on the remote control to freeze
the picture on the screen.  To cancel the Freeze function,
press the FREEZE button again or press any other button.  
FREEZE button
KEYSTONE...

25
Basic Operation
Remote Control
D.ZOOM
buttons
NO SHOW
button 
AUTO PC
button
✔Note:
•See the previous page for the other buttons.POINT 
ed
buttons
black out  ➜the captured image  ➜normal  ➜ • • • • •
Press the NO SHOW button on the remote control to black
out the image.  To restore to normal, press the NO SHOW
button again or press any other button.  When a projected
image is captured and set as “User” in the Logo selection
(p.43), the screen changes each time you press the NO
SHOW button as follows....

26
Choose either Computer 1 or Computer 2 by pressing the
COMPUTER 1 button or COMPUTER 2 button on the top
control or press the COMPUTER button on the remote
control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
frame pointer to the Input Menu icon.1
Computer 2
Input Menu
Press the Point edbuttons to move the red arrow
pointer to either...

27
The Auto PC Adjustment
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon Selected system is 
displayed.
Systems on this dialog box 
can be selected.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
frame pointer to the PC System Menu icon.
Press the Point edbuttons to move the red arrow
pointer to the system that you want to set, and then
press the SELECT button.  
1
2
PC System Menu
Customized Mode (1~5) set in
the PC...

28
Auto PC Adjustment function is provided to automatically adjust Fine syn\
c, Total dots, Horizontal, and Vertical to
conform to your computer.  Auto PC Adjustment function can be operated a\
s follows.
Move the red frame pointer
to the Auto PC Adj. item
and press the SELECT
button.
Please wait... message
will appear while Auto PC
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector....

29
Computer Input
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
frame pointer to the PC Adjust Menu icon.1
2Press the Point edbuttons to move the red frame
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box.  Press the Point
7 8buttons to adjust the
value.
Move the red framed
pointer to an item and
press the SELECT button.
PC Adjust MenuPC Adjust Menu icon
Press the SELECT button
at this item...

30
Use the Point7 8buttons to adjust the horizontal area
displayed by this projector. Display area H
Use the Point7 8buttons to adjust the vertical area
displayed by this projector. Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press
the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button.  The...