Eiki Projector Lc Xb33 User Manual

41

Video Input
This  projector  has  the  picture  screen  resize  function,  which  enables  you  to  customize  the  image size.
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Screen Menu icon.
Press  the  Point ed  buttons  and  move  the  red framed  pointer  to  the  function  that  you  want  to select and then press the SELECT button.
Provide the image at a wide screen ratio of 16:9.
Wide
Provide the image...

42

Setting
Blue back
Press  the  Point 7  8  buttons  to  switch  On/Off.    When this  function  is  "On",  a  blue  image  is  displayed  while the input signal is not detected. 
Keystone
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Setting Menu icon.
Language
T h e   l a n g u a g e   u s e d   i n   t h e   O n - S c r e e n   M e n u   i s available  in  English,  German,  French,  Italian,  Spanish,...

43

SettingSetting
Display
Press  the  Point 7  8  buttons  to  switch  On/Off.  This function decides to display On-Screen Displays.On. . . . . . . . . . . . . Show  all  the  On-Screen  Displays. Use  this  function  when  you  want to  project  images  after  the  lamp becomes  bright  enough.    Factory default setting is this mode.Countdown off  . . .  Show  the  input  image  instead  of the  countdown  when  turning  on the  projector.    Use  this  function w h e n  y o u  w a n t  t o  p r o j...

44

Setting
Capture
This  function  enables  you  to  capture  the  image being  projected  and  use  it  for  a  start-up  display  or interval of presentations.A f t e r  c a p t u r i n g  t h e  p r o j e c t e d  i m a g e ,  g o  t o  t h e Logo  select  function  and  set  it  to  "User".    Then the  captured  image  is  displayed  when  turning  on the  projector  next  time  or  pressing  the  NO  SHOW button. (p.24) To  capture  the  image,  select  [Yes].    To  cancel  the Capture...

45

Setting
To Enter the Logo PIN code
Select  a  number  by  pressing  the  Point ed  buttons. And then press the Point 8 button to fix the number and move the pointer.  The number changes to "✳".  If  you  fixed  an  incorrect  number,  move  the  pointer to  the  number  you  want  to  correct  by  pressing  the Point 7  button,  and  then  select  the  correct  number by pressing the Point ed buttons.
Repeat  this  step  to  complete  entering  a  four-digit number.
A f t e r  e n t e r i n...

46

Setting
Ceiling
When  this  function  is  "On",  the  picture  is  top/bottom and  left/right  reversed.   This  function  is  used  to  project the image from a ceiling mounting the projector.
Rear
When  this  function  is  "On",  the  picture  is  left/right reversed.   This  function  is  used  to  project  the  image  to a rear projection screen.
Ceiling 
Rear 
Input search
This  function  detects  the  input  signal  automatically. When  finding  a  signal,  the  search  will...

47

Setting
Power management
F o r   r e d u c i n g   p o w e r   c o n s u m p t i o n   a s   w e l l   a s maintaining  the  lamp  life,  the  Power  management f u n c t i o n  t u r n s  o f f  t h e  p r o j e c t i o n  l a m p  w h e n  t h e projector is not used for a certain period.When  the  input  signal  is  interrupted  and  no  button  is pressed  for  more  than  30  seconds,  the  timer  display with "No signal" appears.  The countdown starts to turn off the lamp.
Select one...

48

Setting
Remote control
This  projector  provides  two  different  remote  control codes:  the  factory-set  initial  code  (Code  1)  and  the  
secondary  code  (Code ).    This  switching  function 
prevents  remote  control  interference  when  operating several  projectors  or  video  equipment  at  the  same time.
When  operating  the  projector  in  "Code  ",  both  the 
projector  and  the  remote  control  must  be  switched  to 
"Code ".
To change the code for...

49

Setting
Key lock
Security (Key lock and PIN code lock settings)
T h i s  f u n c t i o n  a l l o w s  y o u  t o  u s e  K e y  l o c k  a n d  P I N code  lock  function  to  set  the  security  for  the  projector operation.
This  function  locks  operation  of  the  top  control  or the remote control.It  is  useful  to  prevent  operation  by  an  unauthorized person.
. . . . . . not locked.
. . . . . .  lock  the  operation  of  the  top control.    To  unlock,  use  the remote control.. . . ....

50

Setting
To Enter the PIN code
Select  a  number  by  pressing  the  Point ed  buttons. And then press the Point 8 button to fix the number and move the pointer.  The number changes to "✳".  If  you  fixed  an  incorrect  number,  move  the  pointer to  the  number  you  want  to  correct  by  pressing  the Point 7  button,  and  then  select  the  correct  number by pressing the Point ed buttons.
Repeat  this  step  to  complete  entering  a  four-digit number. 
A f t e r  e n t e r i n g  t...