Eiki Projector Lc Xb250w User Manual

31
PC adjust Menu
Manual PC Adjustment
Some  computers  employ  special  signal  formats  which  may  not  be  tuned  by  Multi-scan  system  of  this  projector.  
Manual  PC Adjustment  enables  you  to  precisely  adjust  several  parameters  to  match  those  signal  formats.  The 
projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall 
the setting for a specific computer. 
1
2
Use the Point ◄► buttons to adjust the value, eliminating a 
flicker...

32
Store
To  store  the  adjusted  data,  select Store  and  then  press the 
Point ►  button  or  the  SELECT  button.  Move  the  highlight 
to one of the Modes 1 to 10 in which you want to store, and 
then press the SELECT button.
Mode free
To  clear  the  stored  data,  select Mode  free  and  then  press 
the  Point ►  button  or  the  SELECT  button.  Move  the 
highlight  to  the  Mode  that  you  want  to  clear  and  then  press 
the SELECT button.
 Note:
	 •	Display area (H/V) cannot be...

33
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
Standard
Remote Control
IMAGE button
Standard
Picture mode with improved halftone for graphics.
Real
Image 1–4
Dynamic
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in the Image 
Adjust Menu (see pages 34-35). This Image memory is 
provided in each computer, component, S-video and video 
input source.
1
2
Press the MENU...

34
Image adjust Menu
Image Adjustment
Reset
Press the MENU button to display the On-Screen 
Menu. Use the Point ▲▼ buttons to select Image 
adjust and then press the Point ► or the SELECT  
button.
1
2Use the Point ▲▼ buttons to select the desired item 
and then press the SELECT button to display the 
adjustment dialog box. Use the Point◄► buttons to 
adjust the setting value.
 Note:
	•	When	White	balance Red, Green or Blue is  
   adjusted, Color temp . will change to User.
	•	When	Blackboard(Green) or...

35
This projector has the picture screen resize function, which 
enables you to customize the image size.Screen Menu
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
Full 
Provide the full screen image. 
 Note:
	 •	This	projector	 cannot	display	 any	resolution	 higher	than	1920	 x	1200.	 If	your	 computer’s	 screen	resolution	 is	
higher than it, reset the resolution lower before connecting to the proj\
ector.
	 •	The	image	data	in	other	than	1024	x	768	is	modified	to	fit	the...

36
Select Digital zoom +. The On-Screen Menu disappears and 
D . zoom + appears. Press the SELECT button to expand the 
image size. Use the Point ▲▼◄► buttons to pan the image. 
The Panning function can work only when the image is larger 
than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the 
D.ZOOM ▲ or the SELECT button on the remote control. 
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM ▲▼ buttons and the SELECT button.
Digital zoom +
Select...

37
Computer Input
When  this  function  is  set  to On,  the  picture  will  be  top/
bottom  and  left/right  reversed.  This  function  is  used  to 
project the image from a ceiling-mounted projector.
Ceiling
When  this  function  is  set  to On,  the  picture  will  be  left/right 
reversed.  This  function  is  used  to  project  the  image  from 
rear of the screen.
Rear
To  reset  the  adjusted  data,  select  Reset  and  press  the 
SELECT button. A confirmation box appears and then select 
Yes....

38
Choose Video  or S-video  by  pressing  the  INPUT  button  on 
the  top  control,  or  the  VIDEO  button  or  the  S-VIDEO  button 
on the remote control.
Before  using  INPUT  button,  correct  input  source  should  be 
selected through menu operation as described below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
When  video  input  signal  is  connected  to  the 
VIDEO jack, select Video.Video
When  video  input  signal  is  connected  to  the 
S-VIDEO jack, select...

39
Choose Computer  1(Component) or Computer  1(Scart)  by  pressing  the  INPUT  button  on  the  top  control  or 
press the COMPUTER 1 or the COMPONENT button on the remote control.
Before  using  INPUT  button,  correct  input  source  should  be  selected  through  Menu  operation  as  described 
below.
1
Input Menu
2Use the Point ▲▼ buttons to select Computer 1 and 
then press the Point ► button.
Input Source Selection (Component, Scart)
When the input source is coming from video 
equipment...

40
Video System Selection
1AV System Menu (Video or S-video)
AV System Menu (Component)
2
If  the  projector  cannot  reproduce  proper  video  image, 
select  a  specific  broadcast  signal  format  from  among PA L, 
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The  projector  automatically  detects  an  incoming  video 
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select 
a specific component video...