Eiki Projector Lc Xb21a User Manual
Have a look at the manual Eiki Projector Lc Xb21a User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
AppendixAppendix
56
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on
pages15-17.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the
computer.
– Solutions Problem
No power – Plug the power...](http://img.usermanuals.tech/thumb/1702/89338/w64_eiki-lc-xb21a-manual_d-55.png "Page 56
AppendixAppendix
56
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on
pages15-17.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the
computer.
– Solutions Problem
No power – Plug the power...")
![Page 60
AppendixAppendix
60
Check the indicators for projector condition.
Indicators and Projector Condition
• • • green• • • red• • • off
• • • blinks green
When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 54 and\
55.
• • • blinks red
The projector is off. (The AC power cord is unplugged.)...](http://img.usermanuals.tech/thumb/1702/89338/w64_eiki-lc-xb21a-manual_d-59.png "Page 60
AppendixAppendix
60
Check the indicators for projector condition.
Indicators and Projector Condition
• • • green• • • red• • • off
• • • blinks green
When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 54 and\
55.
• • • blinks red
The projector is off. (The AC power cord is unplugged.)...")
Appendix 61 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67 MAC 1683 x 6449.774.55 MAC 19104 x 76860.475.08 SVGA 1800 x 60035.15656.5SVGA 800 x 60037.8860.3SVGA 3800 x 60046.87575.00SVGA 4800 x 60053.67485.06SVGA 5800 x 60048.087.19SVGA 6800 x 60037.9061.03SVGA 7800 x 60034.5055.38SVGA 8800 x 60038.0060.51SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 XGA 10104 x 768XGA 11104 x 768XGA 1104 x 768XGA 13104 x 768 6.0477.07 XGA 14104 x 768 61.0075.70 XGA 15104 x 768 35.586.96(Interlace)46.9058.0 XGA 8104 x 768 47.0058.30 XGA 9104 x 768 58.037.00 63.4879.3536.0087.17(Interlace) SXGA 7180 x 104 SXGA 10180 x 960 81.1376.107 60.0060.00 XGA 1104 x 768 XGA 4104 x 768 48.3660.00 XGA 6104 x 768XGA 7104 x 768 56.47670.07 48.5060.044.0054.58 SXGA 8180 x 104SXGA 9180 x 10463.9860.079.97675.05 XGA 5104 x 76860.3174.9 VGA 7640 x 48043.6985.00 575i––––––––15.6550.00(Interlace)480i––––––––15.73460.00(Interlace) SXGA 1115 x 90071.4075.60SXGA 11115 x 90061.065.0 SVGA 10800 x 6003.7051.09 SXGA 13180 x 10450.0086.00(Interlace) ON-SCREEN DISPLA yRESOLUTIONH-Freq .(kHz)V-Freq .(Hz)VGA 1640 x 48031.4759.88VGA 70 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.867.81VGA 6640 x 48037.5075.00 SXGA 1115 x 86464.070.40 ON-SCREEN DISPLA yRESOLUTIONH-Freq .(kHz)V-Freq .(Hz) SXGA 4180 x 10463.3459.98SXGA 5180 x 104SXGA 6180 x 10463.7460.0171.6967.19 SXGA 180 x 1046.5058.60SXGA 3180 x 10463.9060.00 XGA 104 x 76868.67784.997XGA 3104 x 76860.0375.03 SXGA 18180 x 10446.4386.70(Interlace)SXGA 19180 x 10463.7960.18 SXGA 14180 x 104SXGA 15180 x 104SXGA 16180 x 104SXGA 17115 x 900 50.0094.00(Interlace)63.3760.0176.977.0061.8566.00 MAC180 x 96075.0075.08MAC180 x 104480p––––––––575p–––––––– 80.0075.0831.4759.88 1080i–––––––– 31.550.00 33.7560.00(Interlace) 70p––––––––1035i––––––––45.0060.0033.7560.00(Interlace) 1080i––––––––8.1550.00(Interlace) SXGA+ 11400 x 105063.97060.190 MAC1115 x 87068.6875.06 UXGA 41600 x 10093.7575.00 WXGA 1360 x 768WXGA 31376 x 768WXGA 41360 x 768UXGA 11600 x 100 47.7060.00 UXGA 1600 x 100 48.3660.00 UXGA 31600 x 100 56.167.0075.0060.0081.565.00 WXGA 11366 x 768 87.570.00 48.3660.00 SXGA+ 1400 x 105063.35060.10SXGA+ 31400 x 105065.1059.900 SXGA 0180 x 10491.14685.04
Appendix
6
Appendix
Technical Specifications
Mechanical Information Projector Type Multi-media Projector
Dimensions (W x H x D) 1.99" x 3.15" x 9.33" (330 mm x 80 mm x 37 mm) (Not including adjustable foot)
Net Weight 6.4 lbs (.9 kg)
Foot Adjustment 0˚ to 10.0˚ Panel Resolution LCD Panel System 0.6" TFT Active Matrix type, 3 panels
Panel Resolution 1,04 x 768 dots
Number of Pixels ,359,96 (1,04 x 768 x 3 panels) Signal Compatibility Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High Definition TV Signal 480i, 480p, 575i, 575p, 70p, 1035i, and 1080i
Scanning Frequency H-sync. 15 ~ 100 kHz, V-sync. 50 ~ 100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 40" to 300"
Projection Lens F 1.65 ~ 1.83 lens with f .5 mm ~ 7 mm with manual zoom and focus
Throw Distance 4.6' ~ 43.3' (1.4 m ~ 13. m)
Projection Lamp 00W
Interface Video Input Jack RCA Type x 1
Audio Input Jacks RCA Type x Computer Input/S-VIDEO Analog RGB (Mini D-sub 15 pin) Terminal x 1
/Component Input Terminal Monitor Output Terminal Analog RGB (Mini D-sub 15 pin) Terminal x 1 Component/ Computer Audio Input Jack Mini Jack (stereo) x 1
Service Port Connector Mini DIN 8 pin x 1
Audio Output Jack Mini Jack (stereo) x 1 (Variable) Audio Internal Audio Amp 1.0 W RMS
Built-in Speaker 1 speaker, ø1.1" (8 mm) Power Voltage and Power Consumption AC 100 ~ 10 V (3.A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 00 ~ 40 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.) Operating Environment Operating Temperature 41˚F ~ 95˚F (5˚C ~ 35˚C)
Storage Temperature 14˚F ~ 140˚F (-10˚C ~ 60˚C) Remote Control Battery AA or LR6 1.5 V ALKALINE TYPE x
Operating Range 16.4' (5 m)/±30˚
Dimensions 1.9" (W) x 0.87" (H) x 5.7" (D) (49 mm x mm x 145.3 mm)
Net Weight 3.53 oz (100 g) (including batteries)
Appendix
63
Appendix
Accessories Owner's Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
PIN Code Label
Lens Cover with string Control Cable for Serial Port
● The specifications are subject to change without notice.● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Model No.
COMPONENT-VGA Cable : AH-98771 (POA-CA-COMPVGA)
SCART-VGA Cable : AH-98881 (POA-CA-SCART)
S-VIDEO-VGA Cable : AH-98661 (POA-CA-VGAS)
Soft Carrying Case : AH-801 (POA-CAC-VCL)
The parts listed below are optionally available. When ordering those parts, specify the item and Model No. to the sales dealer.
Optional Parts
64 Appendix Terminal: Mini DIN 8-PIN 12345876 SERVICE PORT CONNECTOR COMPUTER IN/S-VIDEO IN/COMPONENT IN/MONITOR OUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 ----- Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) ----- Ground/----- Vert. sync. ----- 9 13 10 1 11 14 15 Serial GND R X D ----- ----- RTS/CTS T X D GND 4 1 3 2 5 6 7 GND8 Appendix 3.74(95)13.0 (330) 2.18(55.3 ) 9.33(237 ) 3.62(92) 3.94(100 ) 5.83(148 ) 4.72(120) 2.95(75) 5.31(135) Screw Holes for Celling MountScrew: M4Depth: 0.394(10.0) Unit:inch(mm) 10°MAX Dimensions
65 AppendixAppendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 3 4* * Should the four-digit number be changed, the factory set number will be invalid. PIN Code Lock No . Logo PIN Code Lock No . Factory default set No: 4 3 1* While the projector is locked with the PIN code.... Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.
EIKI CZECH spol. s.r.o.Umelecká 15170 00 Praha 7 Czech Republic
Tel : +4 0 057004
+4 0 0571413
Fax : +4 0 0571411
E-Mail : [email protected]
ˇ
U .S .A .EIKI International, Inc.
3051 Esperanza
Rancho Santa Margarita
CA 9688-13
U.S.A.
Tel : 800-4-3454 (949)-457-000
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & ÖsterreichEIKI Deutschland GmbH
Am Frauwald 1
65510 IdsteinDeutschland
Tel : 0616-9371-0
Fax : 0616-9371-14
E-Mail : [email protected]
Eastern Europe
japan & WorldwideEIKI Industrial Company Limited.
4-1 Banzai-Cho, Kita-Ku, Osaka,
530-008 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
WorldWide Website http://www .eiki .com
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit ,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-57-4084
Fax : 800-567-4069 (705)-57-4087
E-Mail : [email protected]
Canada
KK3BC©007 Eiki International, Inc.
ChinaEIKI (Shanghai) Co.,LTD1.Dapu Road, Golden Magnolia Plaza
#109 Shanghai,
0003 China
Tel : 86-1-5396-0088
Fax : 86-1-5396-0318
E-Mail : [email protected]