Eiki Projector Lc Xb21a User Manual

							
Setting
41
Video Input
Blue back
Press  the  Point ◄►  buttons  to  switch  On/Off.    When this  function  is  "On",  a  blue  image  is  displayed  while the input signal is not detected. 
Keystone
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the red framed pointer to the Setting Menu icon.
Language
T h e   l a n g u a g e   u s e d   i n   t h e   O n - S c r e e n   M e n u   i s available  in  English,  German,  French,  Italian,  Spanish, P o r t u g u e s e ,   D u t c h ,   S w e d i s h ,   F i n n i s h ,   P o l i s h , Hungarian,  Romanian,  Russian,  Chinese,  Korean,  or Japanese.
P r e s s  t h e  P o i n t ▲ ▼  b u t t o n s  t o  m o v e  t h e  r e d framed  pointer to the item that you want to set and then press the SELECT button.  The Setting dialog box appears.
This  function  corrects  distortion  of  a  projected  image. Select either Store or Reset with the Point ◄► buttons, and  then  press  the  SELECT  button.    The  keystone dialog box appears.  Correct keystone with the Point ▲▼buttons. (p.22)
 
Store  . . . .   store the keystone correction even when the AC power cord is unplugged.
 
Reset . . . .   reset  the  keystone  correction  when  the AC power cord is unplugged.
Setting
This  projector  has  Setting  menu  that  allows  you  to  set up the other various functions described as follows:
1
2
Setting Menu (Language)
Set the red framed pointer to the item and press the SELECT button.
Press the SELECT button at Language item, the Language Menu appears.
Setting Menu icon
Press the SELECT button at this item to display the other languages.
Press the SELECT button at this item to close the dialog box. 
						

							
SettingSetting
4
Display
Press  the  Point ◄►  buttons  to  switch  On/Off.  This function decides to display On-Screen Displays.On. . . . . . . . . . . . . Show  all  the  On-Screen  Displays. Use  this  function  when  you  want to  project  images  after  the  lamp becomes  bright  enough.    Factory default setting is this mode.Countdown off  . . .  Show  the  input  image  instead  of the  countdown  when  turning  on the  projector.    Use  this  function w h e n  y o u  w a n t  t o  p r o j e c t  t h e image  as  early  as  possible  even w h e n   t h e   l a m p   i s   n o t   b r i g h t enough.Off. . . . . . . . . . . . .  Do  not  show  On-Screen  Displays, except;
  ●  On-Screen Menu 
  ●  "Power off?" message 
  ●  P-Timer 
  ●  "No signal" message for Power management item 
(p.46)
  ●  "Please wait..." message
  ● Arrows for panning mode
    ●  Arrows for the Screen position Adjustment
Logo select
This function decides the start-up display as follows:
  User. . . .  the image you captured
  Default. . the factory-set logo
  Off . . . . .  countdown only
Logo (Logo and Logo PIN code lock settings)
This  function  allows  you  to  customize  the  screen  logo with  Logo  select,  Capture,  and  Logo  PIN  code  lock functions.
 Note:
    W h e n  O n  i s  s e l e c t e d  i n  L o g o  P I N  c o d e  l o c k 
f u n c t i o n ,  L o g o  s e l e c t  a n d  C a p t u r e  f u n c t i o n s cannot be selected.
Logo select 
						

							
Setting
43
Setting
Capture
This  function  enables  you  to  capture  the  image being  projected  and  use  it  for  a  start-up  display  or interval of presentations.A f t e r  c a p t u r i n g  t h e  p r o j e c t e d  i m a g e ,  g o  t o  t h e Logo  select  function  and  set  it  to  "User".    Then the  captured  image  is  displayed  when  turning  on the  projector  next  time  or  pressing  the  NO  SHOW 
button. (p.4) 
To  capture  the  image,  select  [Yes].    To  cancel  the Capture function, select [No].
Note:
  • Before  capturing  an  image,  select  Standard 
in  the  Image  Select  Menu  to  capture  a  proper image. (p.30, 37.)
  • A  s i g n a l  f r o m  a  c o m p u t e r  c a n  b e  c a p t u r e d 
up  to  XGA  (10 4x768).    A  signal  from  video 
equipment  can  be  captured  except  for  7 0p, 
1035i, and 1080i.
  • W h e n  c a p t u r i n g  t h e  i m a g e  t h a t  h a s  b e e n 
a d j u s t e d   b y   t h e   K e y s t o n e   f u n c t i o n ,   t h e adjustment  data  is  automatically  reset  and  the projector  captures  an  image  without  keystone adjustment.
  • When the Logo PIN code lock function is "On", 
Capture menu cannot be selected.
  • When  starting  to  capture  a  new  image,  the 
previously  stored  image  is  cleared  even  if  you cancel the capturing.
This function prevents an unauthorized person from changing the screen logo.
 Off
  . . . . . .  t h e  s c r e e n  l o g o  c a n  b e  c h a n g e d f r e e l y  f r o m  t h e  L o g o  s e l e c t  m e n u .  
(p.4)
  On
  . . . . . .  the  screen  logo  cannot  be  changed without the Logo PIN code.
I f  y o u  w a n t  t o  c h a n g e  t h e  L o g o  P I N  c o d e  l o c k setting,  enter  a  Logo  PIN  code  along  the  following 
steps.  The initial Logo PIN code is set "431" at the 
factory.
Logo PIN code lockLogo PIN code lock
Select [Yes] to capture the projected image.
Select [Yes] to stop capturing.
Capture 
						

							
SettingSetting
44
To Enter the Logo PIN code
Select a number by pressing the Point ▲▼ buttons. And then press the Point ► button to fix the number and move the pointer.  The number changes to "".  If  you  fixed  an  incorrect  number,  move  the  pointer to  the  number  you  want  to  correct  by  pressing  the Point ◄  button,  and  then  select  the  correct  number by pressing the Point ▲▼ buttons.
Repeat  this  step  to  complete  entering  a  four-digit number.
A f t e r  e n t e r i n g  t h e  f o u r - d i g i t  n u m b e r,  m o v e  t h e pointer  to  "Set"  by  pressing  the  Point ►  button.  Press  the  SELECT  button  so  that  you  can  change the Logo PIN code lock setting.
If  you  entered  an  incorrect  Logo  PIN  code,  "Logo PIN  code"  and  the  number  (   )  turns  red.  Enter a Logo PIN code all over again.
To Change the Logo PIN code
Logo  PIN code  can  be  changed  to  your  desired four-digit  number.    Select  "Logo  PIN  code  change" with  the  Point ▼  button  and  press  the  SELECT button.  Set a new Logo PIN code.
Be sure to note the new Logo PIN code and keep it at hand.  If you lost the number, you could no longer change  the  Logo  PIN  code  setting.    For  details  on 
PIN code setting, refer to relevant instructions of the 
PIN code lock function on pages 48 and 49.
CAUTION:
WH EN  yOU  H AVE  C H A N GED   TH E LOGO  PI N 
C O D E , W R I T E  D O W N  T H E  N E W  P I N  C O D E 
I N  C O L U M N  O F  T H E   L O G O  P I N C O D E  N O  . 
MEMO  ON PAGE  65,  AND KEEP  IT  SECUREL y . 
SHOULD  THE   LOGO  PIN CODE  BE  LOST  OR 
FORGOTTEN , THE  LOGO  PIN CODE  SETTING  
CAN NO LONGER BE CHANGED . Logo PIN code lock Dialog Box
After a correct Logo PIN code is entered, the following dialog box appears.
Select On/Off by pressing the Point◄►buttons or change the Logo PIN code. 
						

							
Setting
45
Setting
Ceiling
When  this  function  is  "On",  the  picture  is  top/bottom and  left/right  reversed.   This  function  is  used  to  project the image from a ceiling mounting the projector.
Rear
When  this  function  is  "On",  the  picture  is  left/right reversed.   This  function  is  used  to  project  the  image  to a rear projection screen.
Ceiling 
Rear 
Input search
This  function  detects  the  input  signal  automatically. When  finding  a  signal,  the  search  will  stop.    Use  the Point ◄► buttons to select one of the following.  Off. . . . .Input search does not work.  On1. . . .I n p u t  s e a r c h  w o r k s  u n d e r  t h e  s i t u a t i o n below.
  •  When  pressing  the  INPUT  button  on  the 
top control.
  •  When  pressing  the  COMPUTER  button  or 
VIDEO button on the remote control.
  On. . . .I n p u t  s e a r c h  w o r k s  u n d e r  t h e  s i t u a t i o n below.
  •  W h e n   t u r n i n g   o n   t h e   p r o j e c t o r   w i t h 
p r e s s i n g  t h e  P O W E R  O N / S TA N D - B Y button  on  the  top  control  or  on  the  remote control.
  •  When  pressing  the  COMPUTER  button  or 
VIDEO button on the remote control.
  •  When missing the current input signal.  *
                  •   When  pressing  the  INPUT  button  on  the 
top control.
 Note:
  • While Input search is set On1 or On, the status of Input and Lamp are displayed every time the 
signal is switched.
  • If  any  of  the  INPUT  button  on  the  top  control  or  COMPUTER/VIDEO  button  on  the  remote 
control  is  pressed  while  Input  search  is  on,  Input  search  will  stop  and  go  back  to  the  previous input signal.
*If the No show or Freeze function is active, cancel it  
 to activate the Input search. It is also unavailable when   
 On-Screen menu is displayed. 
						

							
SettingSetting
46
Power management
F o r   r e d u c i n g   p o w e r   c o n s u m p t i o n   a s   w e l l   a s maintaining  the  lamp  life,  the  Power  management f u n c t i o n  t u r n s  o f f  t h e  p r o j e c t i o n  l a m p  w h e n  t h e projector is not used for a certain period.When  the  input  signal  is  interrupted  and  no  button  is pressed  for  more  than  30  seconds,  the  timer  display with "No signal" appears.  The countdown starts to turn off the lamp.
Select one of the operations:
 Ready
. . . . . . . .  W h e n   t h e   l a m p   h a s   b e e n   f u l l y cooled  down,  the  POWER  indicator c h a n g e s  t o  g r e e n  b l i n k i n g .    I n this  condition,  the  projection  lamp is    turned  on  if  the  input  signal  is reconnected  or  any  button  on  the t o p  c o n t r o l  o r  r e m o t e  c o n t r o l  i s pressed.
  Shut down  . . . .  W h e n   t h e   l a m p   h a s   b e e n   f u l l y cooled  down,  the  power  is  turned off.
  Off  . . . . . . . . . .  Power management function is off.
T h e n  s e t  t h e  c o u n t d o w n  t i m e r  w i t h  t h e  P o i n t ◄ ►buttons.
Time left before Lamp is off.
Press the SELECT button at Power management and this box appears.  Choose one of three settings with the Point◄►buttons, and go to the timer with the Point ▲▼ buttons and set time with the Point ◄►buttons.
Power management
Note:   Factory default is “Ready: 5 min.” 
						

							
Setting
47
Setting
Remote control
This  projector  provides  two  different  remote  control codes:  the  factory-set  initial  code  (Code  1)  and  the  
secondary  code  (Code ).    This  switching  function 
prevents  remote  control  interference  when  operating several  projectors  or  video  equipment  at  the  same time.
When  operating  the  projector  in  "Code  ",  both  the 
projector  and  the  remote  control  must  be  switched  to 
"Code ".
To change the code for the projector:
Select either "Code 1" or "Code " in this Setting Menu.
To change the code for the remote control:Press  and  hold  both  the  MENU  and  IMAGE  buttons together  for  5  seconds  or  more.    After  changing  the code, make sure the  remote control operates properly.
Note:If the batteries are removed from the remote control for a  long  period  of  time,  the  remote  control  code  will  be reset.
Remote control
Press and hold MENU and IMAGE buttons for more than 5 seconds.
On start
W h e n   t h i s   f u n c t i o n   i s   " O n " ,   t h e   p r o j e c t o r   i s automatically  turned  on  just  by  connecting  the  AC power cord to a wall outlet.
 Note:
    B e  s u r e  t o  t u r n  t h e  p r o j e c t o r  o ff  p r o p e r l y  ( s e e 
"Turning  Off  the  Projector"  on  page  19).    If  the projector  is  turned  off  in  the  incorrect  sequence, the On start function does not operate properly.
Lamp control
This  function  allows  you  to  change  brightness  of  the screen.
 Normal
. . . . .  normal brightness 
  Auto. . . . . . .  b r i g h t n e s s  a c c o r d i n g  w i t h  t h e input  signal 
  Eco  . . . . . . .  lower brightness reduces the lamp power  consumption  and  extends the lamp life.
On start 
						

							
SettingSetting
48
Key lock
Security (Key lock and PIN code lock settings)
T h i s  f u n c t i o n  a l l o w s  y o u  t o  u s e  K e y  l o c k  a n d  P I N code  lock  function  to  set  the  security  for  the  projector operation.
This  function  locks  operation  of  the  top  control  or the remote control.It  is  useful  to  prevent  operation  by  an  unauthorized person.
. . . . . . not locked.
. . . . . .  lock  the  operation  of  the  top c o n t r o l .  To  u n l o c k ,  u s e  t h e remote control.. . . . . .  l o c k   t h e   o p e r a t i o n   o f   t h e r e m o t e  c o n t r o l .  To  u n l o c k , use the top control.
If  the  top  control  accidentally  becomes  locked  and y o u  d o  n o t  h a v e  t h e  r o m o t e  c o n t r o l  o r  t h e r e  i s something  wrong  with  your  remote  control,  contact the dealer where you purchased the projector or the service center.
Key lock
S e l e c t  K e y  l o c k .    C h o o s e one  of  the  alternatives  with t h e  P o i n t e d  b u t t o n s  a n d select [Yes] to activate it.
PIN code lock
This  function  prevents  the  projector  from  being operated  by  an  unauthorized  person  and  provides the following settings for security options.
  Off
  . . . . .  t h e  p r o j e c t o r  i s  n o t  l o c k e d  w i t h  a 
PIN code.
  On1
  . . . .  require  to  enter  a  PIN  code  every  time turning on the projector.
  On  . . . .  require  to  enter  a  PIN  code  to  operate t h e  p r o j e c t o r  o n c e  t h e  p o w e r  c o r d is  disconnected;    as  long  as  the  AC power  cord  is  connected,  the  projector 
can be operated without a PIN code.
Wh e n e v e r  to  c h a n g e  th e  P I N  c o d e  l o c k  s e tti n g or  the  PIN  code  (the  four-digit  number),  you  are 
required to enter the PIN code.  The "134" is set as 
the initial PIN code at the factory.
When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar.
PIN code lock 
						

							
Setting
49
Setting
To Enter the PIN code
Select a number by pressing the Point ▲▼ buttons. And then press the Point ► button to fix the number and move the pointer.  The number changes to "".  If  you  fixed  an  incorrect  number,  move  the  pointer to  the  number  you  want  to  correct  by  pressing  the Point ◄  button,  and  then  select  the  correct  number by pressing the Point ▲▼ buttons.
Repeat  this  step  to  complete  entering  a  four-digit number. 
A f t e r  e n t e r i n g  t h e  f o u r - d i g i t  n u m b e r,  m o v e  t h e pointer  to  "Set"  by  pressing  the  Point ►  button.  Press  the  SELECT  button  so  that  you  can  change the following PIN code lock settings.
If  you  entered  an  incorrect  PIN  code,  "PIN  code" and  the  number  (   )  turns  red.    Enter  a  PIN code all over again.
The PIN code can be changed to your desired four-digit number.
Select  "PIN  code  change"  with  the  Point ▼  button, and  press  the  SELECT  button  to  display  the  New 
PIN code input dialog box.
Select a number by pressing the Point ▲▼ buttons.  And then press the Point ► button to fix the number a n d  m o v e  t h e  p o i n t e r.  R e p e a t  i t  t o  c o m p l e t e entering a four-digit number.  After entering the four-digit  number,  move  the  pointer  to  "Set"  by  pressing the Point ► button.  Then press the SELECT button.
To Change the PIN code 
CAUTION:
WHEN  yOU  HAVE  CHANGED   THE PIN CODE , 
WRITE  DOWN THE NEW  PIN CODE  IN COLUMN 
OF  THE  PIN CODE  NO . MEMO  ON PAGE 65,  AND 
KEEP  IT  SECUREL y . IF yOU  FORGET yOUR PIN 
CODE,  THE PROjECTOR  CAN NO LONGER  BE 
STARTED .
Select  Off,  On1,  or  On  with  the  Point ◄►  buttons and then move the red framed pointer to "Quit" with the  Point ▼  button.  Press  the  SELECT  button  to close the dialog box.
To Change the PIN code lock setting
Change the PIN code
Select PIN code change and 
press the SELECT  button. 
The New PIN code input 
dialog box appears.
The input numbers are being displayed for confirmation.
Change the PIN code lock setting
Select a desired setting with the Point ◄► buttons.
Enter a PIN code
The input numbers change to "" for security. 
Move the pointer to "Set" by pressing the Point  ► button.  And then press the SELECT button. 
						

							
Maintenance and CleaningSetting
50
This  function  is  used  to  reset  the  lamp  replacement counter.  When replacing the projection lamp, reset the lamp  replacement  counter  by  using  this  function.    See page 55 for operation.
Lamp counter 
Factory default
This  function  returns  all  setting  values  except  for  the user  logo,  PIN  code  lock,  Logo  PIN  code  lock,  and  the lamp counter to the factory default settings.
This  function  provides  the  following  alternatives  in  the cooling  fans'  operation  after  turning  off  the  projector. (p.19)
 L1. . . . . .  normal operation
  L. . . . . .  slower  and  lower-sound  than  the  normal operation  (L1),  but  it  takes  longer  to  cool the projector down.
Fan
Exit the Setting Menu.
Quit
Select Factory default and this box appears. Select [Yes], and the next box appears.
Factory default
Select [Yes] to activate it.