Eiki Projector Lc X85 User Manual

51
Use the Point 7 8 buttons to adjust the gamma value to obtain a 
better balance of contrast (from 0 to 15).Gamma
Press the Point 7 button to decrease the sharpness of the image; 
press the Point 8 button to increase the sharpness of the image 
(from 0 to 31).Sharpness
An interlaced video signal can be displayed in progressive mode. 
Press the Point 7 8 buttons to change the progressive scan mode. 
 
Off  . . . .   Progressive scan mode is “Off.”
  On  . . . .   Progressive scan mode is “On.”
  Film  ....

52
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English, 
German, French, Italian, Spanish, Portuguese, Dutch, Swedish, 
Russian, Chinese, Korean, or Japanese.
Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the SELECT button. The 
Setting dialog box appears.
Press the SELECT button at 
Language, then the...

53
This function allows you to customize the screen logo with Logo 
select, Capture, and Logo PIN code lock functions.Logo
✔Note:
	 •	 Before	capturing	an	image,	select	“Standard”	in	the	Image	
Select	Menu	to	capture	a	proper	image.	(pp.	42,	46)
	 •	 A	signal	from	a	computer	can	be	captured	up	to	XGA	(1024	X	 768).
	 •	 Certain	signals	may	not	be	captured	properly.
	 •	 When	capturing	the	image	that	has	been	adjusted	by	the	 Keystone	function,	the	adjusted	data	is	automatically	reset	and	
the	projector...

54
Change the Logo PIN code lock setting
After a correct Logo PIN code is 
entered, the following dialog box 
appears.
Use the Point 7 8 buttons to switch On/Off,
This function prevents an unauthorized person from changing the 
screen logo.
  Off  . . . .   The screen logo can be changed freely from the Logo 
Menu.
  On  . . . .   The screen logo cannot be changed without a Logo 
PIN code.
If you want to change the Logo PIN code lock setting, press the 
SELECT button and the Logo PIN code dialog box...

55
Setting
Lamp control
Filter control
Choose the running speed of cooling fans from the following 
options.
 Normal .......  Operate in this mode under normal conditions.
  Max ...........  Use this mode when you want to increase the 
cooling effect when operating the projector in high 
ambient temperature environment. Fan noise is 
louder than “Normal”. 
Fan control
This function allows you to change the brightness of the screen.
Auto  . . . . . 
 Brightness according to the input signal. 
Normal  . ....

56
On start
When this function is set to “On,” the projector will be 
automatically turned on just by connecting the AC power cord to 
the wall outlet.
✔Note:
	 •	 Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	the	
Projector”	on	page	27).	If	the	projector	is	turned	off	in	the	incorrect	
sequence,	the	On	start	function	does	not	work	properly.
Power management
Time left before the lamp is off
Press the SELECT button at Power 
management and the dialog box 
appears.  Use the Point 7 8...

57
Security
Key lockKey lock
Security
Select Key lock and 
this box appears. 
Choose one of the 
alternatives with the 
Point ed buttons 
and select [Yes] to 
activate it.
This function locks the side control and remote control buttons to 
prevent operation by unauthorized persons.. . . . .  Unlocked.
. . . . .   Lock the side control buttons.
  To unlock, use the remote control.
. . . . .   Lock the remote control buttons.  
To unlock, use the side control.
If the side control accidentally becomes...

58
Change the PIN Code 
Change the PIN code
CAUTION:
WHEN y OU HAVE CHANGED THE PIN CODE,  WRITE DOWN 
A NEW PIN CODE IN COLUMN OF  THE PIN CODE NO . MEMO 
ON PAGE 83,  AND KEEP IT SECUREL y . IF y OU FORGET y OUR 
PIN CODE,  THE PROJECTOR CAN NO LONGER BE STARTED .
The PIN code can be changed to your desired four-digit number. 
Press the Point d buttons to select “PIN code change” and press 
the SELECT button. The New PIN code input dialog box appears. 
Set a new PIN code.
Change the PIN Code Lock...

59
Lamp counter
This function is used to reset the lamp counter. 
When the lamp life reaches a recommended lamp replacement 
time, the time shown in the dialog box turns red and the Lamp 
replacement icon appears on the screen, indicating that the end of 
lamp life is approaching.
When replacing the projection lamp, reset the lamp counter. See 
“Resetting the Lamp Counter” on page 65.
This icon appears on the screen when the end of lamp life is 
approaching.
✔Note:
 
•	 This	icon	also	appears	at	turning...

60
Factory default
This function returns all setting values except for the user logo, PIN 
code lock, Logo PIN code lock, lamp counter, and filter counter to 
the factory default settings.Factory default
Quit
Exit the Setting Menu.
Select Factory default and this box 
appears. Select [Yes], and the next 
box appears. 
Test pattern
Various test pattern are available for use when setting up the 
projector. Filter counter
Filter counter
Filter replacement icon appears on the screen 
at a set time.
✔Note:	 •...