Eiki Projector Lc X80 User Manual
Have a look at the manual Eiki Projector Lc X80 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
71 ON-SCREEN DISPLA yRESOLUTIONH-Freq . (kHz) V-Freq .(Hz) VGA 1640x48031.470 59.880 VGA 2720x40031.470 70.090 VGA 3640x40031.470 70.090 VGA 4640x48037.860 74.380 VGA 5640x48037.860 72.810 VGA 6640x48037.500 75.000 VGA 7640x48043.269 85.000 MAC LC13640x48034.970 66.600 MAC 13640x48035.000 66.670 480p640x48031.470 59.880 575p768x57531.250 50.000 575i768x576(Interlace)15.62550.000 480i640x480(Interlace)15.73460.000 SVGA 1800x60035.156 56.250 SVGA 2800x60037.880 60.320 SVGA 3800x60046.875 75.000 SVGA 4800x60053.674 85.060 SVGA 5800x60048.080 72.190 SVGA 6800x60037.900 61.030 SVGA 7800x60034.500 55.380 SVGA 8800x60038.000 60.510 SVGA 9800x60038.600 60.310 SVGA 10800x60032.700 51.090 SVGA 11800x60038.000 60.510 MAC 16832x62449.720 74.550 XGA 11024x76848.360 60.000 XGA 21024x76868.677 84.997 XGA 31024x76860.023 75.030 XGA 41024x76856.476 70.070 XGA 51024x76860.310 74.920 XGA 61024x76848.500 60.020 XGA 71024x76844.000 54.580 XGA 81024x76863.480 79.350 XGA 91024x768(Interlace)36.00087.170 XGA 101024x76862.040 77.070 XGA 111024x76861.000 75.700 XGA 121024x768(Interlace)35.52286.960 XGA 131024x76846.900 58.200 XGA 141024x76847.000 58.300 XGA 151024x76858.030 72.000 MAC 191024x76860.240 75.080 SXGA 11152x86464.200 70.400 SXGA 21280x102462.500 58.600 SXGA 31280x102463.900 60.000 ON-SCREEN DISPLA yRESOLUTIONH-Freq . (kHz) V-Freq .(Hz) SXGA 41400x105064.030 60.010 SXGA 51400x105062.500 58.600 SXGA 61280x102471.690 67.190 SXGA 71280x102481.130 76.107 SXGA 81280x102463.980 60.020 SXGA 91280x102479.976 75.025 SXGA 101280x96060.000 60.000 SXGA 111152x90061.200 65.200 SXGA 121152x90071.400 75.600 SXGA 131280x1024(Interlace)50.00086.000 SXGA 141280x1024(Interlace)50.00094.000 SXGA 151280x102463.370 60.010 SXGA 161280x102476.970 72.000 SXGA 171152x90061.850 66.000 SXGA 181280x1024(Interlace)46.43086.700 SXGA 191280x102463.790 60.180 SXGA 201280x102491.146 85.024 SXGA+ 11400x105063.970 60.190 SXGA+ 21400x105065.350 60.120 SXGA+ 31400x105065.120 59.900 SXGA+ 4 SXGA+ 5 MAC 211152x87068.680 75.060 MAC1280x96075.000 75.080 MAC1280x102480.000 75.080 WXGA 11366x76848.360 60.000 WXGA 21360x76847.700 60.000 WXGA 31376x76848.360 60.000 WXGA 41360x76856.160 72.000 WXGA 61280x76847.776 59.870 WXGA 71280x76860.289 74.893 WXGA 81280x76868.633 84.837 WXGA 91280x80049.600 60.050 WXGA 101280x80041.200 50.000 UXGA 11600x120075.000 60.000 UXGA 21600x120081.250 65.000 UXGA 31600x120087.500 70.000 UXGA 41600x120093.750 75.000 720p1280x72045.000 60.000 720p1280x72050.000 1035i1920x1035(Interlace)33.75060.000 1080i1920x1080(Interlace)33.75060.000 1920x1080(Interlace)28.125 50.000 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 180 MHz of Dot Clock. PC Adjustment is limited when selecting these modes. Appendix ✽ ✽ ✽ ✽ ✽True cannot be selected when UXGA1, UXGA2, UXGA3, and UXGA4 are selected (p.39)
7 ON-SCREEN DISPLA yRESOLUTIONH-Freq . (kHz) V-Freq .(Hz) D-VGA640x48031.470 59.940 D-480p720x48031.470 59.880 D-575p720x57531.250 50.000 D-SVGA800x60037.879 60.320 D-XGA1024x76843.363 60.000 D-WXGA 11366x76848.360 60.000 D-WXGA 21360x76847.700 60.000 D-WXGA 31376x76848.360 60.000 D-WXGA 41360x76856.160 72.000 D-WXGA 51366x76846.500 50.000 D-WXGA 61280x76847.776 59.870 D-WXGA 71280x76860.289 74.893 ON-SCREEN DISPLA yRESOLUTIONH-Freq . (kHz) V-Freq .(Hz) D-WXGA 91280x80049.600 60.050 D-WXGA 101280x80041.200 50.000 D-720p1280x72045.000 60.000 D-720p1280x72037.500 50.000 D-1035i1920x1035(Interlace)33.75060.000 D-1080i1920x1080(Interlace)33.75060.000 1920x1080(Interlace)28.12550.000 D-1080psf/301920x108033.750 60.000 D-1080psf/251920x108028.125 50.000 D-1080psf/241920x108027.000 48.000 When an input signal is digital from the DVI terminal, refer to the chart below. Appendix ✔Note: • When the input signal is D-SXGA 1, D-SXGA 2, and D-SXGA 3, images may not be displayed properly depending on computers. • Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. • Specifications are subject to change without notice.
7
Technical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 14.56” x 7.36” x 17.32” (370 mm x 187 mm x 440 mm) (Not including raised portions)
Net Weight 25.8 lbs (11.7 kg)
Feet Adjustment 0˚ to 6.5˚
Panel Resolution
LCD Panel System 1.3” TFT Active Matrix type, 3 panels
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 48 Hz–100 Hz
Optical Information
Projection Lamp 330 W NSHA lamp
Interface
Input 1 Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1
Monitor Out Analog RGB (Mini D-sub 15 pin) Terminal x 1
Input 2 BNC Type x 5 (G or Video/Y, B or Cb-Pb, R or Cr-Pr, HV and V)
Input 3 RCA Type x 3 (Video/Component), Mini DIN 4 pin x 1 (S-video)
R/C Jack Mini jack (stereo) (Wired Remote) x 1
Control Port D-sub 9 pin x 1
USB Connector USB Series B x 1
Option Pj-to NetDirector x 1
Power
Voltage and Power Consumption AC 100–120 V (4.6A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.3A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature 41˚F–104˚F (5˚C–40˚C)
Storage Temperature 14˚F–140˚F (-10˚C–60˚C)
Remote Control
Battery AAA or LR03 Type x 2
Operating Range 16.4’ (5 m/±30˚)
Dimensions 1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)
Net Weight 3.5 oz (99 g) (including batteries)
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
USB Cable
Remote Control Cable
PIN Code Label
Lens Attachmentl (For option lens)
Light-block sheet (For option lens)
Spacer (For option lens)
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though
99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less)
may be ineffective by the characteristics of the LCD panels.
Appendix
74
Optional Parts
Lens Replacement
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector
for wide variety of uses.
For installation and replacement of the lens, always contact the sales dealer. The projector lens must be
installed or replaced by well-trained sales or service engineers. Do not attempt to install and replace the lens by
yourself as it may cause injury.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ Link Notice
To the sales and service engineers:
For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and
installing the lens, make sure that you are using the lens with the correct Type No.
Projector InputPJLink InputParameter
Input 1RGB (PC analog)RGB 111
RGB (Scart)RGB 212
RGB (PC digital)DIGITAL 131
RGB (AV HDCP)DIGITAL 232
Input 2VideoVIDEO 121
Y, Pb/Cb,Pr/CrVIDEO 222
RGBRGB 313
Input 3VideoVIDEO 323
Y, Pb/Cb,Pr/CrVIDEO 424
S-videoVIDEO 525
Input 4NetworkNETWORK 151
Model No.
Standard Zoom Lens
: AH-23061/ AH-23081
Long Zoom Lens
: AH-23132
Ultra Long Zoom Lens
: AH-24241
Short Zoom Lens
: AH-23122
Short Fixed Lens
: AH-32011
COMPONENT-VGA Cable : AH-98771
Pj-to NetDirector
: PjNET-30
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
Appendix
75 Configurations of Terminals ANALOG/ MONITOR OUT (Mini D-sub 15 pin) 512341096781514131112 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 4 6 7 8 +5V Power Horiz. sync. Ground (Vert. sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 1 10 1 11 14 15 CONTROL PORT CONNECTOR (D-sub 9 pin) ----- R X D T X D ----- SG ----- RTS CTS Serial 1 4 5 6 7 8 DIGITAL DVI-D (DVI 4 PIN) 1917 21018 31119 41220 51321 61422 71523 81624 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data No Connect 1 5 4 6 7 8 T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 1 10 1 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 1 18 0 19 4 Vcc - Data + Data Ground 1 4 USB CONNECTOR (Series B) 2 3 4 1 Appendix -----9
76 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e fo u r- d i g i t n u m b e r b e changed, the factory set number will be invalid. Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code. While the projector is locked with the PIN code... PIN Code Lock No. Logo PIN Code Lock No. PIN Code Number Memo Appendix
77 Dimensions 3.94 (100) 14.57 (370.0) 5.75 (146) 17.32 (440)13.58 (345) 4.13 (105)5.20 (132) 4.33 (110)4.33 (110)7.36 (187) 6.5º MAX Screw Holes for Ceiling MountScrew: M6Depth: 0.393 (10.0) 2.05 (52) Unit: inch (mm) Appendix
78
Serial Control Interface
This projector provides a function to control and monitor the projector's operations by using the RS-232C serial
port.
Connect a RS-232C serial cross cable to CONTROL
PORT on the projector and serial port on the PC.
(See p.20)
Launch a communication software provided with PC
and setup the communication condition as follows:
1
2
3
Baud rate : 9600 / 19200 bps
Parity check : none
Stop bit : 1
Flow control : none
Data bit : 8
Type the command for controlling the projector and
then enter the "Enter" key.
Example
When you want to change the input to INPUT 2, Type
'C' '0' '6' 'Enter'.
✔Note:
• Enter with ASCII 64-byte capital characters and one-
byte characters.
✔Note:
• The default of the baud rate is set to 19200 bps. If an
error occurs in the communication, change the serial
port and the communication speed (baud rate).
The command is sent from PC to the projector with the
format below;
'C' [Command] 'CR'
Command: two charactors (refer to the command
table on next page.
The projector decodes the command and returns the 'ACK'
with the format below;
'ACK' 'CR'
Format
Operation
Appendix
79 CommandFunction C00Turn the projector ON C01Turn the projector OFF (immediately OFF) C02Turn the projector OFF C05Select Input 1 C06Select Input 2 C07Select Input 3 C08Select Network C0DVideo mute ON C0EVideo mute OFF C0FAspect 4:3 C10Aspect 16:9 C1CMenu ON C1DMenu OFF C20Brightness UP C21Brightness DOWN C23Select Input 2 Video C24Select Input 2 Y, Pb/Cb,Pr/Cr C25Select Input 2 RGB C28ON Start ON C29ON Start OFF C33Select Input 3 Video C34Select Input 3 S-video C35Select Input 3 Y, Pb/Cb,Pr/Cr CommandFunction C3APointer RIGHT C3BPointer LEFT C3CPointer UP C3DPointer DOWN C3FEnter C46Zoom DOWN C47Zoom UP C4AFocus DOWN C4BFocus UP C50Select Input 1 Analog RGB C51Select Input 1 SCART C52Select Input 1 DVI (PC Digital) C53Select Input 1 DVI (AV HDCP) C5DLens shift UP C5ELens shift DOWN C5FLens shift LEFT C60Lens shift RIGHT C89Auto PC Adj. C8EKeystone UP C8FKeystone DOWN C90Keystone RIGHT C91Keystone LEFT CommandFunction CR0Status Read CR6Temperature Read The below table shows the typical command lists for controlling the projector. Please consult your local dealer for further information of another commands. Status Read Command Table Functional Execution Command Table Appendix
U .S .A . EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern Europe EIKI CZECH spol. s.r.o. Umelecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024 +42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected] ˆ Japan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www .eiki .com KC3BL© 2007 Eiki International, Inc. China EIKI (Shanghai) Co.,LTD 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-0318 E-Mail : [email protected]