Eiki Projector Lc X8 User Manual
Here you can view all the pages of manual Eiki Projector Lc X8 User Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
71 Computer Input/Video Input SettingLanguage Fan control Quit Position/Simple Menu/Quit Blue/User/Black Logo select Capture Logo PIN code lock Quit Auto/Normal/Eco 12 languages provided. Menu Logo Lamp control Both/Front/Back Normal/Max Power management Background On/Off Logo PIN code change Quit RC sensor Off/Ready/Shut down 1–30 Min. Quit On/Off On start Key lock SecurityOff Projector Remote Control PIN code lock Off/On1/On2 PIN code change Used timeFilter counter Yes/NoFactory default Off/Countdown...
Page 72
72 Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally . • • • on • • • off• • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fast (approx. 0.5 seconds ON, 0.5 seconds OFF) Appendix Indicators Projector ConditionLAMP red READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue...
Page 73
73 Appendix The projector is detecting abnormal condition . Indicators Projector ConditionLAMPred READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the READY indicator lights green and the projector can be...
Page 74
74 Appendix The projector is detecting abnormal condition . Indicators Projector ConditionLAMPred READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3...
Page 75
75 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment can be limited when these modes are selected. Appendix ✽“True” cannot be selected when WUXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected (p.39) ON-SCREEN DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz) VGA 1 640x480 31.470 59.880 VGA 2 720x400 31.470 70.090 VGA 3 640x400 31.470 70.090 VGA 4 640x480 37.860...
Page 76
76 When an input signal is digital from the DVI terminal, refer to the chart below. Appendix ✔Note: •Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. •Specifications are subject to change without notice. ON-SCREEN DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz) D-VGA 640x480 31.470 59.940 D-480p 720x480 31.470 59.880 D-575p 720x575 31.250 50.000 D-SVGA 800x600 37.879 60.320 D-XGA 1024x768 43.363 60.000 D-WXGA 1 1366x76848.360 60.000...
Page 77
77
Technical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm)
Net Weight 60.85lbs (27.6 kg)
Feet Adjustment 0˚ to 2.8˚
Panel Resolution
LCD Panel System 1.8” TFT Active Matrix type, 3 panels
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System PAL, SECAM, NTSC,...
Page 78
78
Optional Parts
Model No.
Optional Interface Board (DVI) : AH-72003
Optional Interface Board (5-BNC) : AH-72015
Optional Interface Board (D-sub 15) : AH-72031
Optional Interface Board (Dual-SDI) : AH-72162
Optional Interface Board (Network board) : AH-72142
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
Appendix
l
The specifications are subject to change without notice.
l LCD panels are...
Page 79
79 Configurations of Terminals ANALOG (Mini D-sub 15 pin) 512341096781514131 112 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert. sync.) DDC Data Ground Vert. sync. DDC Clock 9 13 10 12 11 14 15 CONTROL PORT CONNECTOR (D-sub 9 pin) ----- R X D T X D ----- SG ----- RTS CTS Serial 1 2 3 4 5 6 7 8 DIGITAL DVI-D (DVI 24 PIN) 1917 21018 31 119 41220 51321 61422 71523 81624 T.M.D.S. Data2– No Connect...
Page 80
80 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e fo u r- d i g i t n u m b e r b e changed, the factory set number will be invalid. Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code. While the...