Eiki Projector Lc X71 User Manual

21
BASIC OPERATION
Press the POWER ON-OFF button on the top control or on
the remote control, and “Power off?” appears on the screen.
Press the POWER ON-OFF button again to turn off the
projector. The LAMP Indicator lights bright and the READY
Indicator turns off. After the projector is turned off, the cooling
fans operate (for 90 seconds). During this “cooling down”
period, the projector cannot be turned on. 
1
2
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES...

22
BASIC OPERATION
ADJUSTING SCREEN
“Zoom” disappears after 4 seconds.
“Focus” disappears after 4 seconds.
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1Press the ZOOM button on the top control or ZOOM  ▲/▼
buttons on the remote control. “Zoom” appears on the screen.
2Press the ZOOM  ▲button or POINT UP button to make the
image larger, and press the ZOOM  ▼button or POINT DOWN
button to make the image smaller.
1Press the FOCUS button on the top control or FOCUS  ▲/▼
buttons on the remote control. “Focus” appears on...

23
Press the FREEZE button on the remote control to freeze the picture on t\
he screen. To cancel the FREEZE
function, press the FREEZE button again or press any other button.
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button.
NO SHOW FUNCTION
PICTURE FREEZE FUNCTION
“No show” disappears after 4 seconds.
1
2
Press the MENU button to display the On-Screen Menu. Press
the POINT LEFT/RIGHT buttons to move the...

24
SELECTING INPUT SOURCE
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons to move the red frame
pointer to the INPUT Menu icon.
Press the POINT UP/DOWN buttons to move the red arrow
pointer to Input 1 and then press the SELECT button. A
Source Select Menu appears. 
1
2
Input 1
INPUT MENU
Move the pointer to a source that you want to select and then
press the SELECT button.3
When your computer is connected to INPUT...

25
COMPUTER INPUT
SELECTING COMPUTER SYSTEM
This projector automatically tunes to various types of computers based o\
n VGA, SVGA, XGA, SXGA, SXGA+,
WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on p\
ages 54-55). When Computer
is selected, this projector automatically detects the incoming signal an\
d projects proper image without any
additional setting. (Some computers need to be set manually.) 
The projector displays one of these: Auto, -----, Mode 1~10, or the syst\
em provided in the...

26
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine syn\
c, Total dots, Horizontal and Vertical
positions to conform to your computer. Auto PC Adjustment function can b\
e operated as follows.
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons to move the red frame
pointer to the PC ADJUST Menu icon.1
2Press the POINT UP/DOWN buttons to move the red frame
pointer to the AUTO PC adj. icon and then...

27
COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune to display signals from most perso\
nal computers currently distributed.
However, some computers employ special signal formats which may not be t\
uned by the Multi-Scan system of
this projector. If this happens, the projector cannot reproduce proper i\
mage and it may be recognized as a
flickering; non-synchronized; non-centered; or skewed picture.
Manual PC Adjustment of this projector enables you to precisely adjust s\
everal...

28
COMPUTER INPUT
Exit the PC ADJUST Menu.
To store the adjusted parameters, move the red frame pointer to
the Store icon and then press the SELECT button. Move the red
arrow pointer to any of the Mode 1 to 10 in which you want to
store the parameters and then press the SELECT button.
To reset the adjusted parameters, select Reset and press the
SELECT button. A confirmation box appears. Select [Yes]. All
the adjustments return to their previous figures.
To clear adjusted parameters previously set, move...

29
COMPUTER INPUT
PICTURE IMAGE SELECT
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons to move the red frame
pointer to the IMAGE SELECT Menu icon.1
2Press the POINT UP/DOWN buttons to move the red frame
pointer to the desired level and then press the SELECT
button.IMAGE SELECT MENU
Normal picture level preset on this projector.
Standard
Picture level with improved halftone for graphics.
Real
User preset picture adjustment in the IMAGE ADJUST Menu. (p.35-
37)
IMAGE...

30
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you t\
o display the desirable image size.
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons to move the red frame
pointer to the SCREEN Menu icon.
When the Digital zoom + is selected, the On-Screen Menu
disappears and “D. Zoom +” appears. Press the SELECT button to
expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT
buttons to pan the image. The Panning function can...