Eiki Projector Lc X71 User Manual

11
PREPARATION
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
●Do not drop or bump the projector, otherwise damages or malfunctions may\
 result.
● When carrying the projector, use a suitable carrying case.
● Do not transport the projector by courier or any other transport service\
 in an unsuitable transport case.
This may cause damage to the projector. To transport the projector by co\
urier or any other transport
service, consult your dealer for the best way.
MOVING PROJECTOR
Use the Carrying Handle...

12
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting\
 computers and video equipment. Refer
to the figures on pages 12 to 14 and connect properly.
Connect external speakers to
these terminals. (See pages 13
and 14.)
EXTERNAL SPEAKER TERMINALS
When controlling a computer
with the remote control of this
projector, connect the mouse
port of your personal computer
to this connector. (See page
13.)
Connect S-VIDEO
output from video
equipment...

13
CONNECTING PROJECTOR
S–VIDEO
R–AUDIO–L
VIDEO/Y Cb/Pb    Cr/Pr VIDEO/Y Cb/Pb Cr/Pr
RESETCONTROL PORT USBAUDIO 1
AUDIO 2
ANALOG IN/OUT
DIGITAL(DVI-D)
INPUT 1
INPUT 2
INPUT 3R/C JACK
GB R H/V V
(
MONO )
IN/OUT
CONNECTING TO COMPUTERS
IBM-compatible computer or Macintosh computer (VGA/SVGA/XGA/SXGA/SXGA+/\
WXGA/UXGA )
VGA Cable  Monitor Output
Desktop type Laptop type
Control Cable
for Serial Port 
Terminal
Serial port PS/2 port
Audio Output
CONTROLPORT
COMPUTER
AUDIO IN 1 or 2
COMPUTER IN ANALOG
Use one...

14
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
Video Source (Example)Video Cassette Recorder Video Disc Player
S-VIDEO
Cable ✽
Terminals 
of the Projector
S-VIDEO Output
Cables used for connection(✽= Cables not supplied with this projector.)
Audio Cable
(RCA x 2)  ✽
AUDIO IN S-VIDEOY - Cb/Pb - Cr/PrVIDEO Component video output equipment.
(such as DVD players or high-definition TV sources.)
Composite
Video Output Component Video
Output
(Y, Cb/Pb, Cr/Pr) Component Video
Output
(Y, Cb/Pb, Cr/Pr)
Y -...

15
BEFORE OPERATION
FOCUS BUTTON
Used to adjust focus. (p.22)
AUTO PC ADJ. BUTTON
Use to operate the AUTO PC
Adjustment function. (p.26)
KEYSTONE BUTTON
Used to correct keystone
distortion. (p.22, 38)
IMAGE BUTTON
Used to select the image
level. (p.29, 33)
FREEZEFR EEZE
SELECTS ELE C T
D.ZOOMD .Z O OM
MUTEM UTE
VOLUMEV O LU M E-
MENUM EN U
NO SO SHOWH O W
IMAGEIM AG E
VOLUMEVO LU M E+
KE YS TONETO NE
LASERLA SER
P-TIMERP-T IM ER
ZOOMZO OM
INPUT 1IN PU T 1
INPUT 2IN PU T 2
INPUT 3IN PU T 3
FOCUSF O...

16
BEFORE OPERATION
To insure safe operation, please observe following precautions:● Use two (2) AA or LR6 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with an used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture, or heat.
● Do not drop the remote control.
● If a battery has leaked on the remote control, carefully wipe the case c\
lean and install new batteries.
● Danger of explosion if battery is incorrectly...

17
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or
close the On-Screen
Menu. (p.18, 19)
MENU BUTTON
IMAGE BUTTON
READY INDICATOR
SELECT BUTTONPOWER ON–OFF BUTTONINPUT BUTTON
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS 
LAMP REPLACE INDICATOR
Used to select the
image level. (p.29, 33)
Lights green when the
projector is ready to be
turned on. And it blinks
green in the Power
management mode. 
(p.40, 46, 55-56)
Becomes dim when the
projector is turned on.
And it becomes...

18
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
You can control and adjust this projector with the On-
Screen Menu. Refer to the relevant pages to operate
each adjustment.
2. MOVING POINTER
3. SELECT ITEMS
Move the pointer (✽see below) or adjust a value of an item by
pressing the POINT buttons on the top control or on the remote
control.
Select an item or set the selected function by pressing the
SELECT button.
ON-SCREEN MENU
✽ The Pointer is an icon in the On-Screen Menu for selecting
an item. See...

19
BEFORE OPERATION
MENU BAR
FOR PC SOURCEPress the MENU button when connecting to the PC input source.
FOR VIDEO SOURCEPress the MENU button when connecting to the VIDEO input source.
Same function as
menu for PC source.
Same function as
menu for PC source.
GUIDE WINDOW
Shows the
selected item of
On-Screen Menu.
PC SYSTEM MENU
Used to select a
computer system.
(See pages 24
and 25.)
IMAGE SELECT MENU
Used to select an
image level among
Standard, Real, and
Image 1 ~ 10.
(See page 29.)
SCREEN MENU
Used to...

20
BASIC OPERATION
TURNING ON THE PROJECTOR
TURNING ON / OFF PROJECTOR 
Connect the projector’s AC power cord into an AC outlet. The
LAMP indicator lights RED, and the READY indicator lights
GREEN.
Press the POWER ON-OFF button on the top control or on
the remote control. The LAMP indicator dims, and the cooling
fans start to operate. The preparation display appears on the
screen and the countdown starts. 
2
3
1
4After the countdown, the input source that was selected the
last time and the Lamp control...