Eiki Projector Lc X6 User Manual

							51
Menu
1
2
Setting
Setting
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
This feature allows you to change the On-Screen Menu setting.
Position
When Position is selected, arrows appear in upward, downward,
right and left directions on the screen.  Move the menu position
with the Control pad and fix it by pressing the SELECT button.
My menu
This feature enables you to customize the On-Screen menu
display.  Put checkmarks on items of each menu that you want
to display. 
Simple menu
On  . . . . . . .When adjusting value in the Image adjust menu, the
value adjustment bar is displayed on the bottom left
of the screen.
Off  . . . . . . .Default setting.
Setting Menu (Language)
changes various settings: Language, Menu, Logo, Background, Lamp,
Remote control, Display, Input search, Power management, On start, Analog
out, Lens memory, Shutter, Security, and Factory default. 
Press the MENU button to display On-Screen Menu.  Spin
the menu icons with the Control pad and press the SELECT
button when the SETTING icon comes right in front.
Move the yellow frame pointer with the Control pad to an
item which you want to set and then press the SELECT
button.  The Setting dialog box appears.
Menu Position
Setting
Setting icon
Language Menu
✔Note:
•Input and Menu items cannot be hid with the My menu setting.
• When selecting Default on My menu setting, all items of the On-Screen Menu will
be displayed.
My Menu
Checkmark
Move the pointer to an item to
be displayed and put a
checkmark on the item by
pressing the SELECT button.
Pointer 
						

							52
Setting
Logo
Logo settings can be altered as follows:
Logo select
This function decides what to be displayed on the starting-up
display as follows:
Default  . . . .the factory-set logo
My logo  . . .the image you captured  
Off  . . . . . . .count-down only 
Capture
This function enables you to capture the image being projected
and use it for a starting-up display or interval of presentations.  
After capturing the projected image, go to the Logo function and
set it to “My logo”.  Then the captured image can be displayed
when turning on the projector next time.  (p28) 
To capture the image, select [Yes].  To cancel the Capture
function, select [No].  
✔Note:
•  Before capturing an image, select Standard in the Image Menu to capture a proper
image.  (See page 44.)
•  Certain signals may not be captured properly.
•When capturing the image that has been adjusted by the Keystone function, the
adjustment data is automatically reset and the projector captures an image without
keystone correction. 
• Once you exit the Logo menu after setting Logo lock to On, you are required to
enter the PIN code every attempting to change the Logo setting.
Logo Lock SettingLock
This function prevents an unauthorized person from changing the
Logo setting.
Off . . . . .the Logo setting can be changed freely from the
Logo menu.  
On . . . . . .the Logo setting cannot be changed without PIN
code.
If you want to change the Logo Lock setting, enter a PIN code
along the following steps. The initial PIN code for Logo Lock
setting is set 4321 at the factory.
Select [Yes] to
capture the
projected
image. 
Select [Yes] to
stop capturing.  
Capture
Logo Select
Enter a Logo PIN code 
Select a number with the Control pad and fix the number with
the SELECT button.  The number will change to ✳.  If you
fixed a wrong number, move the pointer to C with the Control
pad, then enter the correct number again.
Repeat this step to complete entering a four-digit number. 
When the four-digit number is fixed, move the pointer to Ent.
Press the SELECT button so that you can change the Logo
Lock setting.
If you entered a wrong Logo PIN code, Logo PIN code and the
number (✳✳✳✳) will turn red and disappear.  Enter a correct
Logo PIN code all over again.Enter a Logo PIN code
The input numbers
change to “✳” for
security.  
						

							53
Setting
PIN Code Change
Logo PIN code can be changed to your desired four-digit number.
Select PIN code change with the Control pad and press the
SELECT button.  Set a new Logo PIN code.  
Be sure to note the new Logo PIN code and keep it at hand.  If
you lost the number, you could no longer change the Logo PIN
code setting.  For details on PIN code setting, refer to relevant
instructions of the PJ Lock function on page 57.
Background
3 background settings are available in this projector.  Select one of
the followings when no input source is connected to the projector
or no input signal is coming from the connected equipment:  
Blue  . . . . . .blue colored background
My logo  . . .the image you captured  
Black  . . . . .black colored background
Lamp 
Control
This feature allows you to change brightness of the screen.
Normal . .normal brightness 
Auto  . . . .brightness according with the input signal
Eco . . . .lower brightness reduces the lamp power 
consumption and extends the lamp life.
Mode
This projector is equipped with two lamps.  Mode setting allows
you to switch using 1 lamp or 2 lamps.  
2-lamp  . . . .lights both of the lamps inside the projector.
1-lamp  . . .lights a lamp only.  Auto, Lamp1, or Lamp2 can be
altered.  PIN Code change Dialog Box
PointerSelect PIN code change and
press the SELECT button.
The PIN code input dialog box
will appear.
Lamp Control
✔Note:
• When neither of the two lamps is lighted, the projector will shutdown automatically. 
• When either of the two lamps does not light up, the LAMP 1/2 REPLACE indicator
is blinking red and the projector will light the other automatically.  
Setting
Lamp Mode
When selecting Auto in 1-Lamp
mode, the projector automatically
selects either lamp of which the
total Lamp time is shorter and
lights it up.
✔Note:
When using 100 W (optional) lamps, the Lamp control setting cannot be altered.
Remote control
Four remote control channels and eight remote control ID are
prepared for the projector to prevent radio frequency interference
from the other equipment and mutual interference between
projectors when using them at the same time.
For example, operating the projector in “CH-2 and ID-7,”  both the
projector and the remote control must be switched to “CH-2 and
ID-7.”
To change CH and ID for the projector;
Select a remote control CH and ID in this Setting menu.
To change CH and ID for the remote control;
While holding down the CH or ID button, press the SELECT
button.  The remote control CH or ID switches sequentially for
one pressing the SELECT button.  Changing CH and ID should be
done separately.   (See page 16 and 17 for details.)Remote control
When pressing the SELECT button at Remote control,
the remote control CH and ID menu appears. Select CH
and ID respectively.The setting
selected.
Pointer 
						

							54
On start
When this function is “On,” the projector is automatically turned
on just by connecting the AC power cord to a wall outlet.
✔Note:
Be sure to turn the projector off properly (see “Turning Off the  Projector” on page
29).  If the projector is turned off in the wrong steps, the On start function does not
operate properly.
Setting
Display
This function decides whether to display On-Screen Displays.
On  . . . . .shows all the On-Screen Displays.
Off  . . . . .sets On-Screen Displays disappeared except;
●On-Screen Menu 
●“Power off?” message
●P-TIMER
●“No signal” message 
●“Please wait..” message  
●“Searching..” message  
Input search
With this function On, the projector automatically starts input
signal search from Input 1 to Input 5 when turning on the
projector.  This automatic search stops at the Input where the
projector detects any input signal connected. 
Power management
Time left until Lamp off
Press the SELECT button
at Power management and
this box appears.  Choose
Off to disable the timer
setting, Ready or
Shutdown to enable the
timer setting. 
Power management
For reducing power consumption as well as maintaining the lamp
life, the Power Management function starts the count down when
the input signal is interrupted and no button is pressed for 30
seconds or more. 
If the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message No signal
appears on the screen. The count-down of the set time will get
started. The count-down time can be set between 1 and 60
minutes. 
When the count-down time has been elapsed, the lamp will be
turned off to cool itself down. The POWER indicator is lighting red
during this cooling-off period. The next operation depends on the
setting as follows : 
Ready   . . . . . .When the lamp has been fully cooled down, the
READY indicator changes to green blinking. In
this condition, the projection lamp will be turned
on if the input signal is reconnected or any
button on the top control or remote control unit
is pressed. 
Shut down  . . .When the lamp has been fully cooled down, the
power will be turned off. 
Off   . . . . . . . . .The Power Management function is canceled. 
Timer Setting
Move the pointer to the
timer and set time with the
Control pad and press the
SELECT button. The timer
window disappears and
then choose Ready or
Shutdown to enable the
timer setting. 
✔Note:
When the last selected input source in the Input menu differs from the detected input
source, the projector may not display the image properly. 
						

							55
Setting
Analog out
The ANALOG OUT terminal is for output of the analog signal
coming from the ANALOG IN terminal in the Input 1 terminals.
(See page12.)
Select On to enable the signal output through the ANALOG OUT
terminal always except in the stand-by mode or Off to disable the
signal output.
Analog out  is not available when selecting the other Inputs except
Input 1.  Select Input 1 so that Analog out will be available.  (p31,
37)   
Lens memory
Lens memory feature enables you to store the lens shift, zoom
and focus adjustment for each Input.  When selecting Lens
memory, Input 1~5 will be displayed.  Move the pointer to an
Input and press the SELECT button.  Choose one of the following
settings for the Input.
Off . . . . . . . . applies the lens shift, zoom and focus adjusted
last.
Memory . . . . stores the lens shift, zoom and focus currently
adjusted for each input.  When switching to the
input with Memory selected, the lens moves to
the stored position.
Lens memory
Shutter function is available to block out light to the screen, so that
the screen can be used for the other presenters.  Moreover, this
function enhances the effectiveness of contrast by 80% opening
up the shutter inside the projector.
Each setting for the Shutter function can be altered as follows:
Level
Sets up shutter level when releasing the mechanical shutter.
Normal . . . . . . . . . .0% light blocking 
High contrast  . . . . .20% light blocking
Protection
Prohibits the shutter operation from the remote control and the
projectors top control.
Remote control  . . Selecting On prohibits the shutter operation
from the remote control.
Projector . . . . . . . . Selecting On prohibits the shutter operation
from the top control.
It is possible to prohibit the shutter operation from both of the
remote control and the top control.   Shutter
Shutter level
Shutter protection
Setting
Select [Yes]
to activate
the setting. Press the SELECT button at
Lens memory and  choose an
Input for which you want to
store the lens shift, zoom and
focus adjustment and then
select Memory for the input. 
When pressing the SELECT button at Shutter, the
Shutter setting menu appears. Select Protection and
then a desired setting for Remote control and Projector.
✔Note:
•  Lens memory is available only in the lens having memory functions of itself.  Contact
the sales dealer or the service station for available lens.
•100% accurate lens memory is not guranteed.  If an accurate lens position, zoom
and focus cannot be obtained with Lens memory function, adjust them respectively. 
						

							56
Setting
Security
Key lock
This function locks operation from the top control and remote
control.  It is useful to prevent the projector from being operated
by an unauthorized person.  
Projector
 . . . . . . .locks operation from the top control.  To
unlock, use the remote control.  
Remote control  . .locks operation from the remote control.  To
unlock, use the top control.
Off  . . . . . . . . . . . .does not lock any operation.  To release lock,
select this.
If the top control accidentally becomes locked and you do not
have the remote control nearby, disconnect the AC power cord
from the AC outlet, and then with pressing the SELECT button,
reinsert the AC power cord.  This will cancel the top control lock.
Key lock
Shutter Management
The Shutter Management function turns off the projection lamp
when the projector is left with the shutter closed and the set
time has passed away.  The count-down time can be set
between 5 and 180 minutes. 
When the count-down time has elapsed, the shutter will be
opened up automatically and the lamp will be turned off to cool
itself down. The SHUTTER indicator is blinking blue during this
cooling-off period.  When the lamp has been fully cooled down,
the READY indicator turns green lighting and the SHUTTER
indicator keeps blinking.  Should the POWER button be pressed
in this condition, the projection lamp will be turned on and the
SHUTTER indicator turns off.Shutter Management
USB lock
This function prevents the projector from being operated by an
unauthorized person with the optional USB key and provides the
following settings for security options.
Setting  . . . . . .key lock setting (On1, On2, and Off)
Registration  . .registers 2nd USB key into the projector.  (First
key can be registered by just being connected to
the projector in turning on.)
Delete . . . . . . .deletes the registered USB keys.
To set the USB lock, the optional USB key is required.  Refer to
p75 for the optional USB key and contact the sales dealer for
purchasing.  Refer to the owners manual enclosed with the USB
key for detail operation of the USB  lock.USB lock
✔Note:
• USB lock cannot be selected when the optional USB key is not connected to the
projector.  (p13)
• When either of USB lock or PJ lock is set, the other cannot be selected.
• USB key function can be used only with our specified optional USB key.  We do not
guarantee operation with the other USB keys commarcially supplied.  Select Management and set the timer between 5 and
180 minutes.
The setting selected.
The setting selected.
✔Note:
While the Shutter is closed, timer setting of the Power management is invalid.   
						

							57
Setting
The PIN code can be changed to your desired four-digit
number.
Select PJ PIN code change with the Control pad, and press
the SELECT button.  The PIN code input dialog box will appear.
Enter a current PIN code, and then a new PIN code as follows:
Select a number with the Control pad and fix the number with
the SELECT button. Repeat it to complete entering a four-digit
number.  When the four-digit number is fixed, move the pointer
to Ent.  Then press the SELECT button.   To Change PJ PIN Code 
Select Off, On1, or On2 with the Control pad and then press
the SELECT button. To Change the PJ PIN Code setting
CAUTION:
WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN THE
NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO
ON PAGE 81, AND KEEP IT SECURELY.  SHOULD THE PIN
CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO
LONGER BE OPERATED.
Enter a PIN code
Enter a PJ PIN code
Select a number with using the Control pad and fix the number
with the SELECT button.  The number will change to ✳.  If you
fixed a wrong number, move the pointer to C once with the
Control pad to clear the number.  Enter the correct number
again.
Repeat this step to complete entering a four-digit number. 
When the four-digit number is fixed, move to Ent.  Press the
SELECT button so that you can change the following PIN code
lock settings.
If you entered a wrong PIN code, the number (✳✳✳✳) will turn
red and disappear.  Enter a correct PIN code all over again.
Change the PIN code
Select PJ PIN code change and press
the SELECT button.  The PIN code input
dialog box will appear.Select a desired
setting with the
Control pad and
press the SELECT
button.
Change the PJ Lock setting
The input numbers
change to “✳” for
security. 
PJ lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
On1 . . . . . .requires to enter the PIN code every time turning on
the projector.  
On2 . . . .requires to enter the PIN code to operate the
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
Off . . . . .the projector is unlocked with the PIN code.  To
release PJ lock, select this setting.
Whenever to change the PIN code (the four-digit number), you
are required to enter the PIN code.  1234 is set as the initial PIN
code at the factory.PJ lock
When the projector is
locked with the PIN
code,  the PJ lock mark
appears  at  top left of
the Main menu. 
Setting
Pointer
Pointer
The setting selected. 
						

							58
Setting
Factory default
This function returns all setting values to the factory default
settings except for those including: User logo, PJ PIN code, Logo
PIN code, Security setting, Lamp time, Filter time and PJ time. 
Select Factory default and
this box appears.  Select
[Yes], and the next box
appears. 
Factory default
Quit
Exits the Setting menu.
Select [Yes]
to activate it. 
						

							59
Special 
customizes control functions: Lamp, Fan control, Filter, Auto PC adj., Test pattern, RS-
232C, and USB memory and displays Warning log. 
✔Note:
Be sure to reset the Lamp time only after replacing the lamp.
1
2
Press the MENU button to display On-Screen Menu.  Spin
the menu icons with the Control pad and press the SELECT
button when the SPECIAL icon comes right in front.
Move the yellow frame pointer with the Control pad to an
item which you want to select and then press the SELECT
button.  The corresponding dialog box for the item appears.
Lamp
This feature displays total time of the lamps being used.  Select
Lamp 1 or Lamp 2 to show each lamp wattage and time.
To reset the Lamp time, move the pointer to Reset and then
press the SELECT button.  The message Lamp time reset? is
displayed.  Move the pointer to [Yes] and then press the SELECT
button. 
Move the pointer to Reset
and then press the SELECT
button.  The message
“Lamp time reset?” is
displayed.  Select [Yes] and
the confirmation box
appears.
Special Menu (Lamp)
Fan control
Fan control
This function provides you the following alternatives for the
cooling fans operation of the projector and the Option box (Smoke
Resist Box ) separately provided.  See page 75 for the Option box.
Normal   . . .normal operation 
Max  . . . . . .faster operation than Normal.  
Select Normal for usual operation and Max to enhance the
cooling effect.
Filter
This feature displays total time of the filter on the projector and
the Option box (Smoke Resist Box) being used.  
To reset the Filter time, move the pointer to Reset and then
press the SELECT button.  A confirmation box appears.  Move the
pointer to [Yes] and then press the SELECT button. Filter
Special
Special
Special icon
Select [Yes]
to activate
it.
✔Note:
Setting of the cooling fans of the projector and the option box cannot be changed
independently. 
✔Note:
Option box cannot be selected when it is not mounted on the projector.  For the
information of the Smoke Resist Box, refer to Optional Parts on p75 and contact the
sales dealer or the service station.Select Fan control and this
box appears. Select one of
these settings with the
Control pad and press the
SELECT button to enable it.
The setting selected.Move the pointer to Reset and
then press the SELECT button
and the confirmation box
appears.
Select [Yes] to
activate it. 
						

							60
Special 
Auto PC adj.
Select On to enable the Auto PC adjust function and Off to
disable it.  Refer to page 31 and 41 for Auto PC adjust function.
Test pattern
Various test patterns are prepared in this projector allowing users
to test the projection.  Select one from the following twenty kinds
of patterns: Cross 1 (W), Cross 2 (R), Cross 3 (G), Cross 4 (B),
Cross 5 (M), Cross 6 (C), Cross 7 (Y), Gradation 1~4, Color, and
Flat 1~8.
To cancel the Test pattern, press the CANCEL button on the top
control or the remote control.
Select Test pattern and
then the Test pattern
selection box  is displayed.
Choose one of these
patterns with the Control
pad and press the SELECT
button to display the
selected pattern on screen.
Test pattern
Indicates the other items
exist below.
RS-232C
This feature allows users to set serial communication
configuration (baud rate and  the projector ID) when connecting
several projectors via the RS-232C terminal of the projector.  (p13,
80)
Baud rate  . . . . .9600 / 19200
Projector ID  . . .001 ~ 999 
✽
Default  . . . . .returns Baud rate and  Projector ID to factory
default setting 
(Baudrate: 19200, Projector ID: 001)
USB memory
This feature allows users to store PC mode and Image adjustment
data on the optional USB key connected to the projector and recall
it from the USB key.  PC mode data and Image adjustment data
can be stored separately on respective 10 memory areas of the
USB key.  (PC mode data: mode 1–50 x 10, Image adjustment
data: Image 1-10 x 10)  (p43, 47)
Save  .  .  .  .  .  .stores the adjustment data on the USB key
connected to the projector.
Load  . . . . . . . . .recalls the stored data.
Delete  . . . . . . .deletes the stored data.
To use the USB memory function, the optional USB key
(separately provided) is required.  Refer to p75 for the USB key
information and contact the sales dealer or service station for
purchasing.  Refer to the owners manual enclosed with the USB
key for further information on USB memory function.
RS-232C
USB memory
✔Note:
• USB memory function cannot be operated without our specified optional USB key.
See page 75 for the optional parts.
• USB memory cannot be displayed without the optional USB key connected to the
projector.  (p13)The item selected.
Move the pointer to one of
these and then press the
SELECT button and USB
Memory Menu appears .
To be continued to the next page.