Eiki Projector Lc X6 User Manual

31
Basic Operation
Information
Choose either Input 1, Input 2, Input 3, Input 4, or Input 5 by
pressing the INPUT button on the top control or the INPUT 1,
INPUT 2, INPUT 3, INPUT 4, or INPUT 5 button on the remote
control.
Before using these buttons, correct input source should be
selected through menu operation as described on p37~38.
Input 1
Input 3
Input 2
INPUT button
Input 5
Input 4
Auto PC Adjustment function is provided to automatically adjust
Fine sync, Total dots, Horizontal, and Vertical...

32
Basic Operation
Press the FREEZE button on the remote control to freeze the
picture on screen.  To cancel the Freeze function, press the
FREEZE button again or press any other button.
Press the P-TIMER button on the remote control.  The timer
display “00 : 00” appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).  
To stop the P-Timer, press the P-TIMER button.  And then, press
the P-TIMER button again to cancel the  P-Timer function.
P-Timer Function
SCREEN button
Normal
Wide...

33
Basic Operation
Volume
Press the VOL button on the remote control.  The volume dialog
box appears on screen.  Adjust volume with the Control pad.  
Mute
Press the MUTE button on the remote control to cut off sound.
To restore sound to its previous level, press the MUTE button
again or press the VOL button and change volume level with the
Control pad.
indicates approximate
level of volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.  
Volume...

34
LENS
SHIFTMENU
CANCEL
SELECTZOOM
FOCUS
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages for respective adjustment and setting
procedure.
Softly tap the Control pad on the top control or the remote
control to spin Menu icons.  When a desired Menu icon
comes right in front, press the SELECT button to display
Sub-menu.
Select an item to adjust by softly tapping the Control pad or
gliding your finger on the Control...

35
Basic Operation
Menu icon
Pointer 
(yellow frame)
Move the pointer to select an item with the Control
pad and press the SELECT button or by mouse
clicking.  The selected item box will turn yellow.
Item
SELECT
button
Item data
Click the Point edor move the bar
to adjust value.
Control bar for Mouse Operation 
This bar appears when a USB mouse is connected to
the USB terminal of the projector.
Guide 
Currently selected menu.
On-Screen Menu
Mouse cursor
When clicking on 77 or 88 on the control bar, menu...

36
Basic Operation
INPUT :selects input sources.   Before selecting input sources with the top
control or the remote control, correct input source should be selected
through menu operation.
SYSTEM :selects system of the connected computer and video sources.  
IMAGE :selects image levels suitable for the connected image source and allows
you to select the image data stored in Image Adjust Menu.
IMAGE ADJ. :adjusts each picture component of the projected image in detail and
store the adjusted image data in...

37
Input 
Press the MENU button to display the On-Screen Menu.
Spin the menu icons with the Control pad and press the
SELECT button when the INPUT icon comes right in front.1
Move the yellow frame pointer with the Control pad to a
input which you want to select.2
Input 1
Move a pointer to Input 1 and press the SELECT button.
When the input source is analog coming from a
computer through the Input 1 (ANALOG IN)
terminal, select RGB (PC Analog). RGB (PC Analog)
When the input source is digital coming from...

38
Input
Y, Pb/Cb, Pr/CrWhen the input source is component
coming from video equipment connected
to the Input 3 (Y, Pb/Cb, Pr/Cr) terminal,
select Y, Pb/Cb, Pr/Cr.
Input 3
Move a pointer to Input 3 and press the SELECT button.
Input 4
When digital PC/AV source is connected to the Warp & Blending
board inserted into the Input 4 terminal, the following source
menu will be displayed.
Input 5
When video input signal is connected to the
Input 3 (VIDEO) terminal, select Video.Video
When video input signal is...

39
PC System Menu
1
2
Custom Mode
(1~50) set in the
PC Adjust Menu.
(p42, 43)
This projector automatically tunes to various types of computers
based on VGA, SVGA, XGA, SXGA, UXGA or WXGA with its Multi-
scan system and Auto PC Adjustment.  If Computer source is
selected in the Source Select Menu, this projector automatically
detects the signal format and tunes to project a proper image
without any additional setting.  (Signal formats provided in this
projector is shown on page 72~73 )
When the projector...

40
System
AV System Menu (Video or S-Video)
AV System Menu (Component)
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the yellow
frame pointer to a
system and press
the SELECT button
to activate it.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
If the projector cannot...