Eiki Projector Lc Wns3200 User Manual

							11
Top Control and IndicatorsPart names and functions
① POWER indicator
-   Lights red when the projector is in stand-   
by mode.
-   Lights green during operations.
-   Flashes green in the Power management     
mode.
-   Flashes red during fans cooling.
-   Lights  orange  when  abnormity  is  detected         
in the projector.
-   Flashes  orange  when  internal  temperature        
is abnormally high. 
②
 WARNING indicator
Lights red when the life of the projection      
lamp draws to an end.
③
 POWER button
To turn on/off the projector. ④ 
OK/INPUT button
-   Press  INPUT  button  to  select  input  source        
while no screen menu is displayed.
-   Enter screen menu or execute the        
selected item.
⑤  MENU button
Open or close the screen menu.
⑥  ▲▼
/Keystone button 
-   Select  items  or  adjust  the  data  in  screen          
menu.
-   Correct image keystone distortion.
①
②
④
⑥ ③
⑤  
						

							12
Remote control① POWER 
Turn on or turn off the projector.(Page 21)
② VGA
Select VGA as input source.(Page 28)
③ INPUT 
Enter input source menu to select input 
source directly. (Page 28)
④ HDMI 
Select HDMI as input source.(Page 28)
⑤ MENU
Open or close the screen menu.(Page 22)
⑥ COMPONENT 
Select component as input source.(Page 28)
⑦ BLANK 
Temporarily close the image on the screen. 
(Page 27)
⑧ VIDEO 
Select Video as input source.(Page 28)
⑨ S-VIDEO 
Select S-video as input source.(Page 28)
⑩ 
 
-   Select  items  or  adjust  the  data  in  screen         
menu.
-   Select  the  image  display  area  in  digital        
zoom  mode.(Page 22)
⑪  OK 
            
Enter screen menu or execute selected     
items.(Page 22)
①
③ ②
④
⑧
⑩ ⑥ ⑦
⑪ ⑤
⑨
Part names and functions  
						

							13
⑱⑲
⑳
⑭
⑯ ⑫
⑬
⑮
⑰
⑫  D
.ZOOM+
Select the digital zoom + mode.(Page 27)
⑬ TIMER 
Enable the timer function.(Page 27)
⑭  VOUME +  
Increase the volume level.(Page 24)
⑮ AUTO 
Enter auto setup mode.(Page 25)
⑯  VOUME -  
Decrease the volume level.(Page 25)
⑰  FREEZE 
Freeze the projected image.(Page 26)
⑱ D
. ZOOM- 
Select the digital zoom - mode.(Page 27)
⑲
 MUTE Mute the sound.(Page 25)
⑳  BACK 
Return to main menu.(Page 22)
Part names and functions  
						

							14
Adjustable foot
Operating range
Install remote control batteries
①   Open the battery      
compartment lid.  ② Install new batteries  
into the compartment.③ Replace the 
compartment lid.
Two AAA  batteries
For correct polarity 
(+ and –), be sure 
battery terminals 
are in contact 
with pins in the 
compartment.
Point the remote control toward the projector 
remote receiver when pressing any button. 
The maximum operating range for the remote 
control is about 5 meters and 60 degrees 
vertically and horizontally.
The projection angle can be adjusted up to 10 
degrees with the adjustable foot.
Lift the front of the projector up and press the 
lock on the adjustable foot to release it.
Release the lock and the foot is then locked. 
Adjust the height and tilt angle by rotate the 
foot.
Keystone distortion of projected images can be 
corrected by remote control or menu operation.
30° 30°
5m
Part names and functions
To ensure safe operation, please observe the following precautions:
● Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid matter.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case clean and 
   install new batteries.
● Risk of explosion if a battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions on the battery or local 
   regulations or guides.
Adjustable foot  
						

							15
Positioning the projector
XNS2600,XNS3100 (4:3):
XNS2600,XNS3100 (16:9):
WNS3200 (16:9): WNS3200 (16:10):
Installation
 Note:
●  The brightness in a room has a great influence on picture quality
. It is recommended to limit the 
     ambient lighting in order to get the best image.
●  All measurements are approximate and may vary from the actual sizes.
Screen size
(WxH)mm
4:3 aspect 
ratio 30
" 100
" 150
" 200
" 300
"
610x457 2032x1524
3048x2286 4064x30486096x4572
Maximum 0.88m3.00m4.49m 6.00m 9.02m
Minimum 1.06m3.60m5.40m 7.21m10.83m
Screen size
(WxH)mm
16:9 aspect 
ratio 30
" 100
" 150
" 200
" 300
"
664x374 2214x1245
3321x1868 4428x24916641x3736
Maximum 0.96m3.26m4.90m 6.55m 9.83m
Minimum 1.16m3.92m5.89m 7.86m11.80m
Screen size
(WxH)mm
16:9 aspect 
ratio 30
" 100
" 150
" 200
" 300
"
664x374 2214x1245
3321x1868 4428x24916641x3736
Maximum 0.96m3.26m4.90m 6.55m 9.83m
Minimum 1.16m3.92m5.89m 7.86m11.80m
Screen size
(WxH)mm
16:10 aspect 
ratio 30
" 100
" 150
" 200
" 300
"
646x404 2154x1346
3231x2019 4308x26926462x4039
Maximum 0.94m3.17m 4.77m 6.37m 9.56m
Minimum 1.12m3.81m 5.73m 7.64m11.48m
        30”
        30”
        30” (Diagonal:Inch)
   Max.
   Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
41:1 6:1
12.9:1 0.88m
3.00m
4.49m
6.00m 9.02m
10.83m
0.96 m 3.26m
4.90 m
6.55 m 9.83  m
11.80m
0.94m 3.17 m
4.77 m
6.37 m 9.56  m
11.48m
        30”
        30”
        30” (Diagonal:Inch)
   Max.
   Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
41:1 6:1
12.9:1 0.88m
3.00m
4.49m
6.00m 9.02m
10.83m
0.96 m 3.26m
4.90 m
6.55 m 9.83  m
11.80m
0.94m 3.17 m
4.77 m
6.37 m 9.56  m
11.48m
        30”
        30”
        30” (Diagonal:Inch)
   Max.
   Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
41:1 6:1
12.9:1 0.88m
3.00m
4.49m
6.00m 9.02m
10.83m
0.96 m 3.26m
4.90 m
6.55 m 9.83  m
11.80m
0.94m 3.17 m
4.77 m
6.37 m 9.56  m
11.48m
        30”
        30”
        30” (Diagonal:Inch)
   Max.
   Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
(Diagonal:Inch)
   Max.    Min.
(Center)
13:1 6:1
12.9:1 0.88m
3.00m
4.49m
6.00m 9.02m
10.83m
0.96 m 3.26m
4.90 m
6.55 m 9.83  m
11.80m
0.94m 3.17 m
4.77 m
6.37 m 9.56  m
11.48m  
						

							16
Connecting to computer(Digital and analog RGB)
Installation
Cables used for connection:
● VGA cable                                                              ● Serial control cable*
● HDMI cable*                              
(*=Cables are not supplied with the projector)
Unplug the power cords of both the projector and external equipment from the 
AC outlet 
before connecting the cables.
HDMI output
HDMIcable
HDMI
RS-232C port Serial output
Serial 
control 
cable Monitor output
Monitor input
VGA
cable VGA
cable
VGA input VGA output
This terminal is 
switchable. Set 
up the terminal as 
either VGA IN 2 or 
VGA OUT. (See 
page 42.)  
						

							17
Connecting to video equipment (Video, S-Video)Installation
Cables used for connection:
● Video cable*                                                   ● S-Video cable*
●  RCA cable*                                                    ● Audio cable*
(*=Cables are not supplied with the projector)
 
S-VIDEO INS-video 
ouput Video 
ouput
Component
 output Audio
 output Audio
 output Audio
 output
VIDEO IN
S-VIDEO
cable
RCA
cable
Audio
cable
Audio
cableAudio
cable
Video
cable
COMPONENT AUDIO IN
L/R AUDIO IN
L/R AUDIO IN
L/R
Unplug the power cords of both the projector and external equipment from the  AC outlet 
before connecting the cables.  
						

							18
(R)   (L)(R)   (L)
Audio 
cable
Audio cable
(stereo)
Audio cable
(stereo) Note: The left and right 
channels  are combined when 
there  is  only  the  L(mono)  is           
inserted.
External audio equipment
Unplug the power cords of both the projector and external equipment from the 
AC outlet 
before connecting the cables.
Connecting to audio equipment
Installation
Cables used for connection:
● Audio cable*                              
(*=Cables are not supplied with the projector)
Audio input
Audio input
Audio output
Audio output  
						

							19
Connecting the AC power cord
Installation
Connect the AC power cord to the projector.
This projector uses nominal input voltages of 
100–240V AC and it automatically applies to 
different input voltages. It is designed to work 
with a single-phase power system having a 
grounded neutral conductor. To reduce the risk 
of electrical shock, do not plug into any other 
type of power system. If you are not sure of 
the type of power being supplied, consult your 
authorized dealer or service station. Connect 
the projector with all peripheral equipment 
before turning it on.
The AC outlet should be near this equipment 
and must be easily accessible.
Note:

Note: 
   For safety, unplug the AC power cord when the projector is not in use. When the projector is 
  connected to an outlet with AC power cord, it is in stand-by mode and consumes a little electric 
  power.
√  Note:
●  Using incorrect power cord may influence the product per formance, or even cause hazards like an        
electric shock or fire. To ensure the product per formance and security, please apply the cable of the 
same model with the original one.
●   Common connecting cables include the AC power cord, various VGA cables, video cable,and serial 
control cable.
Note on the power cordAC power cord must meet the requirements of the country where you use the projector. Confirm the 
AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power 
cord does not match.
Projector side AC outlet side
For the U.S.A. and  Canada For Continental 
Europe For the U.K.
To power cord 
connector on your 
projector.
Ground
To the AC outlet.
(110 V AC)To the AC outlet.
(200 - 240 V AC)To the AC outlet.
(200 - 240 V AC)
Ground  
						

							20
Turn on the projector
1. 
Complete peripheral connections (with a  
computer, VCR, etc.) before turning on the  
projector.
2.   Connect the projector’s AC power cord into  
AC outlet. The POWER indicator turns red. 
3.   Press the POWER button on top control or   
on the remote control. The POWER indicator  
becomes green and the cooling fans start to 
work. The preparation display appears on  
the screen and the countdown starts.
4.   If the projector is locked with a PIN code, a 
PIN code input dialog box appears. Enter     
the PIN code as instructed below.
If you forget your PIN code, the projector 
can no longer be started. Take special care 
in setting a new PIN code. Write down the 
number in a column on page 66 of this 
manual and keep it properly. Should the PIN 
code be missing or forgotten, consult your 
dealer or service center.
Enter a PIN code
Press OK button to input PIN code. Press
 
  
button to select a number and press OK button 
to enter it to the PIN code box, then number 
changes  to  "*"  and  automatically  move  the 
cursor to next box. If you fixed an incorrect 
number, press MENU button to reset it again.
Repeat the step to complete entering a three-
digit number.
After entering the three-digit number, will 
automatically move the cursor to “Set”, press 
OK button so that you can start to operate the 
projector.
If you entered an incorrect PIN code, the “PIN 
code”  and  the  number  (***)  turn  red.  PIN  dode 
will be reset within one second automatically, 
Enter the correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a 
security code that allows the person who knows 
it to operate the projector. Setting the PIN code 
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the 
"Expand" "Security" menu on pages 45 for PIN 
code lock operation of the projector. Move the cursor to OK, and press OK.
-----                   Input PIN code        Exit
 PIN Code
Set Cancel
Move                    Select                Reset
PIN Code
Set Cancel
*
Basic operation

Note:
●   When  the  logo  select  is  set  to  be  "Off",  the  
logo will not be displayed on the screen.
●   When  the  Display  function  is  set  to  be  "Off”,    
the logo and countdown will not be displayed    
on the screen.
●   During  the  countdown  period,  all  operations   
are invalid except shutdown.
Caution on handling the PIN code.