Eiki Projector Lc Wns3200 User Manual

Owner's Manual
Model 
Multimedia Projector
LC-XNS2600
LC-XNS3100
LC-WNS3200 

2
Features and Design
Note:
  - The screen menu and pictures in the manual may slightly differ from \
the real product.
  - The manual is subject to change without prior notice.
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, 
and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77\
 million 
colors, and matrix liquid crystal display (LCD) technology.
Compact Design  
This projector is designed compact in size 
and...

3
Contents
Features and Design 2
Contents 3
Safety Instructions  4
Safety Guide  5
Air circulation  6
Moving the projector  6
Installing the projector properly   6
Compliance  7
Accessories 8
Part names and functions  9
Front  9
Back 9
Bottom  9
Terminals 10
Top Control and Indicators  11
Remote control  12
 Install remote control batteries  14
Operating range  14
Adjustable foot  14
Installation 15 Positioning the projector  15
Connecting to computer 
(Digital and analog  RGB)...

4
Safety Instructions
Please read this manual completely before installing 
and operating the projector.
The projector provides many convenient features 
and functions. Proper operation may enable you to 
fully utilize the features and keep it in good condition. 
Other wise, it will not only shor ten the ser vice life of 
the  unit,  but  also  may  cause  malfunction,  a  fire,  or 
other accidents.
If your projector cannot work properly, please read 
this manual again, check the operating methods and...

5
Safety Guide
All the safety and operating instructions should be 
read before the product is operated.
Read all of the instructions given here and retain 
them for later use. Unplug this projector from AC 
power supply before cleaning. Do not use liquid or 
aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the 
projector.
For added protection to the projector during a 
lightning storm, or when it is left unattended and 
unused for long periods of time,...

6
M4x1010mm
 Torque:1.40N.m 
Safety Guide
Air circulationVents in the cabinet are provided for ventilation. 
To ensure reliable operation of the product and to 
protect it from overheating, these openings must 
not be blocked or covered.
Caution
Hot air is exhausted from the exhaust vent. 
When using or installing the projector, the 
following precautions should be taken.
-   Do  not  put  any  flammable  objects,  or  spray  
can near the projector. Hot air is exhausted   
from the air vents.
-    Keep...

7
Compliance
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC Power Cord for the United States and Canada:AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters Laboratories (UL) 
and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit 
into the power outlet. Do not try to defeat this safety feature....

8
User's Manual(CD)AC Power cordRemote control with batteries
(AAA or LR03)
VGA cable Quick start guide
Accessories  

9
Front
Back
Bottom
Part names and functions
①Top control and Indicators
② Zoom ring
③ Lamp cover
④ Filter
⑤ Remote control receiver
⑥ Projector lens
⑦ Air intake vent
⑧ Focus ring
⑨ AC cord connector
⑩ Terminals
⑪ Anti-thief slot
⑫ Speaker
⑬ Adjustable foot
⑭
Exhaust vent
⑨
⑬⑫
⑭ ⑥
①
②③
④ ⑤
⑦
⑧
⑩ ⑪
Caution
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.  

10
Terminals
Part names and functions
① ②
③④
⑤ ⑥⑦
⑧
⑨⑩
① AUDIO OUT -  Connect external audio amplifier to this   
jack.
-   Output audio signal from  ②,⑦or⑧.
② AUDIO IN (R/L) -  Connect the video equipment connected  
to ③  or ④ to this jack.
-   For a mono audio signal (a single audio    
jack), connect it to L(MONO) jack.
③ COMPONENT/VIDEO IN -  Connect video signal to VIDEO port.
-   Connect composite video or component   
video signal to this jack.
④ S-VIDEO IN Connect S-Video signal to this jack.
⑤...