Eiki Projector Lc Wb200a User Manual

Video	Input
41
Video	Input
An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ........  Disabled. L 1 ........  For an active picture. L 2 ........  For a still picture. Film .....	For	watching	a	film.	With	this	function,	the projector reproduces pictures faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ...........

42
Video	Input
Screen Setting
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Normal
Screen Menu1
2
Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.
Custom adj .
Note:	 •	 When	no	signal	is	detected,	Normal is set automatically and the Aspect adjustment menu disappears.	 •	 The	adjustable	range	for	Scale	H/V and Position	H/V is limited depending on the input signal.
Full
Provide the full screen...

Video	Input
43
Video	Input
Keystone
This function is used to adjust keystone distortion of the  projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone     
To correct keystone distortion, press the SELECT button.  Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p. 23). Store      
To store or reset the keystone correction, press the Point ► button.    Store .......... 
Keep the keystone correction even when the AC power cord is...

44
Setting
Setting MenuPress the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ►	button or the SELECT button to access the submenu items.
1
2Use the Point ▲▼ buttons to select the desired item and then press the Point ►	button or the SELECT button to access the selected item.
This projector has a Setting menu that allows you to set up the other va\
rious functions described below.
Language
Menu position
This function is used to change the...

45
SettingSetting
Note:		•	 During	Input	search is in progress, If the MENU button or the ON/STAND-BY button is pressed, Input	search will stop. If the COMPUTER 1/2 or VIDEO or COMPONENT or S-VIDEO or HDMI button is pressed, Input	search will stop and go back to the button's input signal. 		•	Input	search, Auto	PC	adj. and Auto	keystone can not be set Off at the same time.  		•	Auto	keystone corrects vertical distortion only, not correct horizontal distortion.		•	 The	Auto	keystone	function	can	not...

46
Setting
This function decides whether to display On-Screen Displays. On ........................  Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown	off ...  Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off ...........................

Setting
47
Setting
Capture
Capture
This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.  A confirmation box appears and select Yes to capture the projected image.
After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (p. 26). 
To cancel...

48
Setting
Enter	a	Logo	PIN	codeUse the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can...

Setting
49
Setting
HDMI	setup
HDMI	setup
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9). Select Computer 2 or Monitor out with the Point ▲▼ buttons.
 Computer 2 ....... computer input Monitor out ........... monitor out
Terminal function is not available when selecting Computer 2 to the input source.  Change the input source to the others (Computer	1,	and so on) so that the Terminal function will be available. (pp. 25,...

50
Setting
Picture in Picture
Picture in Picture
 
Select the Picture in Pictrue mode among P in P, P	by	P and Off.
  Mode
P 	in	P:	  Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu. P 	by	P:  Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu.						Off:	Turn off the Picture in Picture function. 
  Subpicture	size
Press the Point ◄► buttons to change the Subpicture size among Small, Middle and Large....