Eiki Projector Lc Wb200a User Manual

Basic Operation
21
Basic Operation
How	to	Operate	the	On-Screen	Menu
T h e   p r o j e c t o r   c a n   b e   a d j u s t e d   o r   s e t   v i a t h e   O n - S c r e e n   M e n u .   T h e   m e n u s   h a v e   a hierarchical  structure,  with  a  main  menu  that  is divided into submenus, which are further divided into  other  submenus.  For  each  adjustment  and setting procedure, refer to respective sections in this manual.
Use  the  Point ▲▼  buttons  to  highlight  or select  a  main  menu...

22
Basic Operation
Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
Main Menu
③ Image	select For both of computer and Video sources, used to select an image mode from among Dynamic, Standard, Real, Cinema, Blackboard(Green),  Colorboard and Image	1-4. (pp.32, 39)
④ Image	adjust For Computer source, used to adjust computer image [Contrast, Brightness, Color temp ., White	 balance	(R/G/B), Sharpness, Gamma, Reset	and Store]. (p.33)     For VIDEO source, used to adjust picture...

Basic Operation
23
Basic Operation
Rotate the Zoom Ring to zoom in and out.  Rotate the Focus Ring to adjust the focus of the image.  
Zoom	and	Focus	Adjustment
If a projected picture still has keystone distortion after  pressing  the AUTO  SETUP  button  on  the top  control  or  the  AUTO  SET  button  on  the remote  control,  correct  the  image  manually  as follows:
Press  the  KEYSTONE  button  on  the  remote control.  The  Keystone  dialog  box  appears. Use  the  Point ▲▼  buttons  to  correct...

24
Basic Operation
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ►	button or the SELECT button to access the submenu items. 
Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button again to select...

Basic Operation
25
Basic Operation
Remote	control	Operation
Using the remote control for some frequently used operations is advisabl\
e. Just pressing one of the buttons enables you to make the desired operation quickly without callin\
g up the On-Screen Menu.
Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input source. See pages 27, 37 for details.
COMPUTER	1/2,	HDMI,	VIDEO,	S-VIDEO	and	COMPONENT	buttons
FREEZE	button
Display the input source...

26
Basic Operation
NO	SHOW	button
Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.52 for detail of Setting for the P-timer function.To stop the count time, press the P-TIMER button.To cancel the P-timer function, press and hold the P-TIMER button.
P-TIMER	button
Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 32, 40 for details.
IMAGE	buttonNo	show	disappears after 4 seconds.
Note:See the previous...

Basic Operation
27
Choose either Computer	1	(RGB)	or Computer	2	(RGB) by pressing the COMPUTER 1 or COMPUTER 2 button on the remote control. Or you can press the INPUT button on the top control to choose the desired input source.Before using these buttons, correct input source should be selected thro\
ugh Menu operation as described below.
1
Input	Menu
2
3
Note:   When  the  Input  search  function  is  set  to On  1  or On  2  in  the  Auto  setup  function,  the  input  signal will be searched...

28
Computer	Input
PC	System	Menu
PC	System	Menu
Computer	System	Selection
This projector automatically tunes to various types of computers with it\
s Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector\
 automatically detects the signal format and tunes to project a proper image without any additional\
 settings. (Signal formats provided in this projector are shown on page 71-72.)
One of the following messages may appear when:
When the projector cannot...

Computer	Input
29
Computer	Input
Auto PC Adjustment function is provided to automatically adjust Fine	sync, Total	dots, Horizontal and Vertical to conform to your computer.
PC adjust Menu
Auto	PC	Adjustment
To	store	adjustment	parametersThe adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode	(1–10) in the PC System Menu (p.28). See also “Store” on page 31.
Note:	 •	Fine	sync, Total	dots,...

30
Computer	Input
PC adjust Menu
Manual	PC	Adjustment
Some computers employ special signal formats which may not be tuned by M\
ulti-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match t\
hose signal formats. The projector has 10 independent memory areas to store those parameters \
manually adjusted. It allows you to recall the setting for a specific computer. 
1
2
Use the Point ◄► buttons to adjust the value, eliminating a flicker from the...