Eiki Projector Lc Sxg400 User Manual

							71
When an input signal is digital from the DVI terminal, refer to the chart below.
PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu.
✔Note:
	 •	Specifications	are	subject	to	change	without	notice.
Appendix
ON-SCREEN  DISPLA yRESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-VGA 640x480 31.470 59.940 
D-480p 720x480 31.470 59.880 
D-575p 768x575 31.250 50.000 
D-SVGA 800x600 37.879 60.320 
D-XGA 1024x768 43.363 60.000 
D-WXGA 1 1366x768 48.360 60.000 
D-WXGA 2 1360x768 47.700 60.000 
D-WXGA 3 1376x768 48.360 60.000 
D-WXGA 4 1360x768 56.160 72.000 
D-WXGA 5 1366x768 46.500 50.000 
D-WXGA 6 1280x768 47.776 59.870 ON-SCREEN 
DISPLA yRESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-WXGA 7 1280x768 60.289 74.893 
D-SXGA 1 1280x1024 63.980 60.020 
D-SXGA 2 1280x1024 60.276 58.069 
D-SXGA 3 1280x1024 31.650 29.800 
D-SXGA+ 1 1400x1050 63.970 60.190 
D-SXGA+ 2 1400X1050 63.35030.120
D-SXGA+ 3 1400X1050 65.12059.900
D-720p 1280x720 45.000 60.000 
D-1035i 1920x1035 33.750
60.000 
(Interlace)
D-1080i 1920x1080 33.75060.000 
(Interlace)
D-1080i 1920x1080 28.12550.000 
(Interlace) 
						

							72
Technical Specifications
Mechanical Information 
 Projector Type      Multi-media Projector 
  Dimensions (W x H x D)    13.7” x 6.46” x.17.48” (348.1 mm x 164 mm x 444 mm) 
  Net Weight      17.86 lbs (8.1 kg) (for LC-SXG400L),  19.62 lbs (8.9 kg) (for LC-SXG400) 
  Feet Adjustment      0˚ to 5.0˚                 
Panel Resolution 
 LCD Panel System      1.0” TFT Active Matrix type, 3 panels  
  Panel Resolution      1,400 x 1,050 dots 
  Number of Pixels      4,410,000 (1,400 x 1,050 x 3 panels)           
Signal Compatibility 
 Color System     PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  High Definition TV Signal    480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
 
 Scanning Frequency     H-sync. 15 kHz–100 kHz, V-sync. 50 Hz–100 Hz     
  
Optical Information 
 Projection Image Size (Diagonal)  Adjustable from 30” to 300” (LC-SXG400) 
  Throw Distance      3.9’–32.8’ (1.2 m–10.0 m) (LC-SXG400)           
  Projection Lens      F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus (LC-SXG400) 
  Projection Lamp      330 W               
Interface
 Input 1        Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1  
  Input 2        BNC Type x 5 (G or Video/Y, B or Cb-Pb, R or Cr-Pr, HV and V) 
  Input 3        RCA Type x 1, Mini DIN 4 pin x 1 
 
AUDIO IN        Audio 1 (Mini Type stereo), Audio 2 (Mini Type stereo), Audio 3 (RCA Type) x 2 
 Analog Out     Mini D-sub 15 pin x 1 
 Audio Out      Audio (Mini Type stereo) x 1 
  R/C Jack        Mini Type (Wired Remote) x 1 
  Control Port      Mini DIN 8 pin x 1  
  USB Connector       USB Series B x 1 
  Option        Pj-to NetDirector Connector Terminal x 1 
 
Audio 
  Internal Audio Amp      1.0 W RMS 
  Built-in Speaker      1 speaker, ø1.1” (28 mm)  
 
Power
  Voltage and Power Consumption  AC 100–120 V (4.6A Max. Ampere), 50/60 Hz (The U.S.A and Canada) 
          AC 200–240 V (2.3A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)   
   
Operating Environment
 Operating Temperature    41˚F–95˚F (5˚C–35˚C) 
  Storage Temperature    14˚F–140˚F (-10˚C–60˚C) 
 
Remote Control 
  Battery AAA or LR03 Type x 2                   
  Operating Range      16.4’ (5 m/±30˚) 
  Dimensions      1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)       
  Net Weight      3.5 oz (99 g) (including batteries)           
  Laser Pointer     
Class II Laser (Max. Output: 1 m W/Wave length: 640–660 nm)  
Appendix 
						

							73
     Model No.
Standard Lens    : AH-23421 (only LC-SXG400L) 
Long Zoom Lens    : AH-23541 
Short Fixed Lens    : AH-23631 
Long Zoom Lens    : AH-23661 
Short Zoom Lens    :AH-23511 
PJ-to NetDirector    : PjNET-30 
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
Accessories
 Owner’s Manual (CD-ROM) 
  Quick Reference Guide 
  AC Power Cord 
  Remote Control and Batteries 
  VGA Cable 
  USB Cable 
  Control Cable 
  Remote Control Cable 
  Lens Mount Cover (for LC-SXG400L) 
  Lens Cap (for LC-SXG400) 
  PIN Code Label 
●  The specifications are subject to change without notice.
●  LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny 
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Appendix 
						

							74
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified 
conformance with PJLink Standard Class 1.
Projector Input
RGB
RGB (Scart)
RGB (PC Analog)
Video
Component
Auto
PJLink Input
RGB 3
RGB 2
RGB 1
VIDEO 1
VIDEO 2
Video
S-video
VIDEO 4
VIDEO 5
VIDEO 3
Input 2
Input 3
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ Link Notice
Parameter
13
12
11
21
22
24
25
23
RGB (PC Digital)DIGITAL 131
RGB (AV HDCP)DIGITAL 232
Input 1
NetworkNETWORK 151Input 4
Appendix 
						

							75
Terminal : Mini DIN 8-PIN
CONTROL PORT CONNECTOR
Vcc
- Data
+ Data
Ground
1
2
3
4
2
34 1
INPUT 1/ANALOG OUT
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red Input
Ground (Horiz.sync.)
Green Input
No Connect
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Input (Composite H/V sync.)
Ground (Vert.sync.)
 DDC Data
Ground
Vert. sync. Input
 DDC Clock
9
13
10
12
11
14
15
USB CONNECTOR (Series B)
DVI-D TERMINAL (DIGITAL) 
1917
21018
31119
41220
51321
61422
71523
81624
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
No Connect
1
5
2
4
3
6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
13
10
12
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
21
18
20
19
22
23
24
12345876
Appendix
+5V Power
Red Output
Ground (Horiz.sync.)
Green Output
No Connect
Blue Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Output 
Ground (Vert.sync.)
No Connect
No Connect
Vert. sync. Output
No Connect
9
13
10
12
11
14
15
No Connect
Input
Output
1
R X D
5No Connect
2 No Connect
6T X D
3 No Connect
7No Connect
4 GND
8No Connect 
						

							76
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number be changed, the 
factory set number will be invalid.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the 
projector’s body while it is locked with a PIN code.
PIN Code Lock No  .
Logo PIN Code Lock No  .
Appendix 
						

							77
Dimensions
Appendix
13.7 (348.1)1.65 (41.9)
5º MAX
7.87 (200)
6.46 (164)
21.09 (535.7) 17.48 (444)
10.85 (275.5)
3.40 (86.4)
11.10 (282)Screw Holes for Ceiling Mount
Screw: M6
Depth: 0.393 (10.0)
Unit: inch (mm) 
						

							U .S  .A .
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel  : 800-242-3454 (949)-457-0200 
Fax  : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12 
65510 Idstein
Deutschland
Tel  : 06126-9371-0 
Fax  : 06126-9371-14
E-Mail : [email protected]
Canada
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada 
Tel  : 800-563-3454 (705)-527-4084
Fax  : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7 
Czech Republic
Tel  : +42 02 20570024
    +42 02 20571413 
Fax  : +42 02 20571411
E-Mail : [email protected]ˆ
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka, 
530-0028 Japan
Tel  : +81-6-6311-9479 
Fax  : +81-6-6311-8486
WorldWide Website http://www  .eiki .com
KF7BL© 2008 Eiki International, Inc.
China
EIKI (Shanghai) Co.,LTD
1. Dapu Road, Golden Magnolia 
Plaza #2109 Shanghai, 
200023 China 
Tel : 86-21-5396-0088 
Fax  : 86-21-5396-0318
E-Mail : [email protected]