Eiki Projector Lc Sxg400 Specifications

							MULTIMEDIA PROJECTOR
MODEL LC-SXG400
  LC-SXG400L
✽
OWNER’S MANUAL
✽ Projection lens is optional. 
						

							2
◆ Compact Design
 This projector is designed compact in size and 
weight. It is easy to carry and installed anywhere you 
wish to use.
◆ Functionally Rich
 This projector has many useful functions such as lens 
shifting, ceiling and rear projection, perpendicular 
omnidirectional projection, variety of lens options, 
etc.
◆ Multi-use Remote Control
 Use the remote control as wired and wireless, or as a 
PC wireless mouse. Eight remote control codes and 
selectable pointer shapes are also available.
◆ Simple Computer System Setting
 The projector has the Multi-scan system to conform 
to almost all computer output signals quickly (p.37). 
Up to UXGA resolution can be accepted.
◆ Useful Functions for Presentation
 Digital zoom function allows you to focus on the 
crucial information during a presentation (pp.15, 47).
◆ Security Function
 The Security function helps you to ensure security of 
the projector. With the Key lock function, you can lock 
the operation on the top control or remote control 
(p.54). PIN code lock functions prevents unauthorized 
use of the projector (pp.54–56).
◆  Lamp Control
 Brightness  of  the  projection  lamp  can  be  selected  
(p.49).
◆ Power Management
 The Power management function reduces power 
consumption and maintains lamp life (p.53).
◆ Multilanguage Menu Display
 Operation menu is available in 12 languages; English, 
German, French, Italian, Spanish, Portuguese, Dutch, 
Swedish, Russian, Chinese, Korean, and Japanese 
(p.49).
◆  Network-capable
 Through an optional Pj-to NetDirector, you can 
operate and control the projector.
◆  Logo Function
 The Logo function allows you to customize the 
screen logo (pp.50-51). You can capture an image for 
the screen logo and use it for the starting-up display 
or between presentations.
◆ Helpful Maintenance Functions
 Lamp and filter maintenance functions provide for 
better and proper maintenance of the projector.
◆ Multiple Interface Terminals
 The projector has several interface terminals that 
can support various types of equipment and signals 
(pp.11–12).
✔Note:
	 •	The	On-Screen	Menu	and	figures	in	this	manual	may	differ	slightly	from	the	product.
	 •	The	contents	of	this	manual	are	subject	to	change	without	notice.
Features and Design 
						

							3
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features and Design . . . . . . . . . . . . . . . .2
Table of Contents   . . . . . . . . . . . . . . . . . . 3
To the Owner   . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . . . . . . . . . . . 5
Air Circulation  6
Installing the Projector in Proper Directions  7
Positioning Precautions  7
Moving the Projector  8
Cautions in Handling the Projector  8
Compliance . . . . . . . . . . . . . . . . . . . . . . . 9
Part Names and Functions  . . . . . . . . . .10
Front  10
Back  10
Bottom  10
Rear Terminal  11
Top Control  13
Remote Control  14
Remote Control Battery Installation  16
Remote Control Receivers and Operating Range  16
Adjustable Feet  16
Remote Control Code  17
Installation   . . . . . . . . . . . . . . . . . . . . . . 18
Positioning the Projector   18
Moving the Lens  18
Lens Installation  19
Connecting to a Computer (Digital and Analog RGB)  20
Connecting to Video Equipment (Video, S-Video)  21
Connecting to Video Equipment (Component and  
RGB Scart)  22
Connecting the AC Power Cord  23
Basic Operation  . . . . . . . . . . . . . . . . . . 24
Turning On the Projector  24
Turning Off the Projector  25
How to Operate the On-Screen Menu  26
Menu Bar  27
Operating with Projector Control  28
Sound Adjustment  29
Operating with Remote Control  30
Laser Pointer Function  32
Pointer Function  32
Wireless Mouse Operation  33
Input Selection  . . . . . . . . . . . . . . . . . . . 34
Input   34
Input Source Selection  35
Video System Selection  36
Computer Adjustment  . . . . . . . . . . . . .37
Computer System Selection  37
Auto PC Adjustment  38
Manual PC Adjustment  39
Image Level Selection  . . . . . . . . . . . . .41
Image Level Selection   41
Image Adjustment  . . . . . . . . . . . . . . . .42
Image Adjustment  42
Screen Adjustment . . . . . . . . . . . . . . . .45
Screen Adjustment  45
Screen Size Adjustment (Computer Signals)  46
Screen Size Adjustment  
(Video, Component Signals)  48
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting  49
Maintenance and Filter Cleaning  . . . .58
Cleaning the Filter  58
Resetting the Filter Counter  58
Lamp Replacement  59
Resetting the Lamp Counter  60
Warning Indicators  61
Cleaning the Projection Lens  62
Cleaning the Projector Cabinet  62
Appendix . . . . . . . . . . . . . . . . . . . . . . . . 63
Troubleshooting  63
Menu Tree  66
Indicators and Projector Condition  68
Compatible Computer Specifications  70
Technical Specifications  72
Optional Parts  73
PJ Link Notice  74
Configurations of Terminals  75
PIN Code Number Memo  76
Dimensions  77
Table of Contents 
						

							4
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK) .  NO 
USER-SERVICEABLE PARTS INSIDE EXCEPT 
LAMP REPLACEMENT  . REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL .
THIS SYMBOL INDICATES THAT DANGEROUS 
VOLTAGE CONSTITUTING A RISK OF ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE 
IMPORTANT OPERATING AND MAINTENANCE 
INSTRUCTIONS IN THE OWNER'S MANUAL 
WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Before installing and operating the projector, read this 
manual thoroughly.
The projector provides many convenient features and 
functions. Operating the projector properly enables 
you to manage those features and maintains it in good 
condition for many years to come.
Improper operation may result in not only shortening 
the product life, but also malfunctions, fire hazard, or 
other accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections 
and try the solutions in the “Troubleshooting” section 
in the back of this manual. If the problem still persists, 
contact the dealer where you purchased the projector 
or the service center.Safety Precaution
WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE .
–  This projector produces intense light from the projection 
lens. Do not stare directly into the lens as much as 
possible, other wise eye damage could result. Be 
especially careful that children do not stare directly into 
the beam.
–  Install the projector in a proper position. Other wise it 
may result in fire hazard.
–  Allowing the proper amount of space on the top, sides, 
and rear of the projector cabinet is critical for proper 
air circulation and cooling of the unit. The dimension 
shown here indicate the minimum space required. 
If the projector is to be built into a compartment or 
similarly enclosed, these minimum distances must be 
maintained.
–  Do not cover the ventilation slot on the projector. Heat 
build-up can reduce the service life of your projector, 
and can also be dangerous.
–  If the projector is unused for an extended time, unplug 
the projector from the power outlet.
0.7 (20 cm)
1.5 (50 cm) 3 (1 m)
1.5 (50 cm)
SIDE and TOPREAR
CAUTION
Not for use in a computer room as defined in the 
Standard for the Protection of Electronic Computer/Data 
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle 
que définie dans la norme ANSI/NFPA 75 Standard for 
Protection of Electronic Computer/Data Processing 
Equipment 
NOTE: This symbol and recycle system are applied only to EU 
countries and not applied to the countries in the other 
area of the world.
Yo u r   E I K I   p r o d u c t   i s   d e s i g n e d   a n d 
manufactured with high quality materials 
and  components  which  can  be  recycled 
and reused.
This  symbol  means  that  electrical  and 
electronic equipment, at their end-of-life, 
should  be  disposed  of  separately  from 
your household waste.
Please dispose of this equipment at your 
local community waste collection/recycling centre.
In  the  European  Union  there  are  separate  collection 
systems for used electrical and electronic products.
Please help us to conserve the environment we live in! 
  CAUTION ON HANGING FROM  THE CEILING
When hanging the projector from the 
ceiling, clean air intake vents, filters, or 
top of the projector periodically with a 
vacuum cleaner. If you leave the projector 
unclean for a long time, the cooling fans 
can be clogged with dust, and it may 
cause a breakdown or a disaster.
DO NOT SET THE PROJECTOR IN 
GREAS y, WET , OR SMOKy CONDITIONS SUCH  AS IN A 
KITCHEN  TO PREVENT A BREAKDOWN OR  A DISASTER . 
IF THE PROJECT OR COMES IN CONTACT  WITH OIL OR 
CHEMICALS , IT MAy BECOME DETERIORATED .
READ  AND  KEEP  THIS  OWNER'S  MANUAL  FOR 
LATER USE .
To the Owner 
						

							5
All the safety and operating instructions should be read 
before the product is operated.
Read all of the instructions given here and retain them 
for later use. Unplug this projector from AC power supply 
before cleaning. Do not use liquid or aerosol cleaners. Use 
a damp cloth for cleaning.
Follow all warnings and instructions marked on the 
projector.
For added protection to the projector during a lightning 
storm, or when it is left unattended and unused for long 
periods of time, unplug it from the wall outlet. This will 
prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for 
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the 
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, 
or table. The projector may fall, causing serious injury 
to a child or adult, and serious damage to the projector. 
Use only with a cart or stand recommended by the 
manufacturer, or sold with the projector. Wall or shelf 
mounting should follow the manufacturer’s instructions, 
and should use a mounting kit approved by the 
manufacturers.
An appliance and cart combination 
should be moved with care. Quick 
stops, excessive force, and uneven 
surfaces may cause the appliance 
and cart combination to overturn.
Slots and openings in the side and bottom of the cabinet 
are provided for ventilation, to ensure reliable operation of 
the equipment and to protect it from overheating.
The openings should never be covered with cloth or other 
materials, and the bottom opening should not be blocked 
by placing the projector on a bed, sofa, rug, or other 
similar surface. This projector should never be placed near 
or over a radiator or heat register.
This projector should not be placed in a built-in installation 
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through 
cabinet slots as they may touch dangerous voltage points 
or short out parts that could result in a fire or electric 
shock. Never spill liquid of any kind on the projector.Do not install the projector near the ventilation duct of air-
conditioning equipment.
This projector should be operated only from the type 
of power source indicated on the marking label. If you 
are not sure of the type of power supplied, consult your 
authorized dealer or local power company.
Do not overload wall outlets and extension cords as this 
can result in fire or electric shock. Do not allow anything 
to rest on the power cord. Do not locate this projector 
where the cord may be damaged by persons walking on 
it.
Do not attempt to service this projector yourself 
as opening or removing covers may expose you to 
dangerous voltage or other hazards. Refer all servicing to 
qualified service personnel.
Unplug this projector from wall outlet and refer servicing 
to qualified service personnel under the following 
conditions:
a. 
When the power cord or plug is damaged or frayed.
b.  If liquid has been spilled into the projector.
c.  If the projector has been exposed to rain or water.
d.  If the projector does not operate normally by following 
the operating instructions. Adjust only those controls 
that are covered by the operating instructions as 
improper adjustment of other controls may result in 
damage and will often require extensive work by a 
qualified technician to restore the projector to normal 
operation.
e.  If the projector has been dropped or the cabinet has 
been damaged.
f.  When the projector exhibits a distinct change in 
performance-this indicates a need for service.
When replacement parts are required, be sure the service 
technician has used replacement parts specified by the 
manufacturer that have the same characteristics as the 
original part. Unauthorized substitutions may result in fire, 
electric shock, or injury to persons.
Upon completion of any service or repairs to this 
projector, ask the service technician to perform routine 
safety checks to determine that the projector is in safe 
operating condition.
Safety Instructions
NOTE FOR CUSTOMERS IN THE US
Hg  LAMP(S)  INSIDE THIS PRODUCT  CONTAIN MERCURY  
AND  MUST  BE  RECYCLED  OR  DISPOSED  OF  ACCORDING 
TO LOCAL, STATE OR FEDERAL LAWS . 
						

							6
Openings in the cabinet are provided for ventilation. 
To ensure reliable operation of the product and to 
protect it from overheating, these openings must not 
be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
– Do not put any flammable object or spray can near 
the projector, hot air is exhausted from the air 
vents.
–  Keep the exhaust vent at least 3’ (1 m) away from 
any objects.
–  Do not touch peripheral parts of the exhaust vent, 
especially screws and metallic parts. These areas 
will become hot while the projector is being used.
–  Do not put anything on the cabinet. Objects put on 
the cabinet will not only get damaged but also may 
cause fire hazard by heat.
Cooling fans are provided to cool down the projector. 
The fans’ running speed is changed according to the 
temperature inside the projector.
Air Circulation
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air flow
The projector uses a lamp which generates significant 
heat. The cooling fans and air vents are provided to 
dissipate the heat by drawing air into the housing and 
the filter is located in the intake vents to prevent dust 
from getting inside of the projector.
In order to care for the projector appropriately, regular 
cleaning is required. Remove any dirt or dust that has 
accumulated on the projector and on or in the filter.
If the projector detects that the filter is clogged, a 
“Filter warning” icon (red) will appear on the screen 
and “WARNING FILTER” indicator on the top panel 
will blink (see below). Stop using the projector 
immediately and clean or replace the filter.
Blocking the air vents and leaving the projector 
uncleaned for a long time may not only damage the 
projector and may require costly repairs but may also 
cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” 
on page 57 and “Maintenance and Filter Cleaning” on 
page 58.
Damages to the projector caused by using an 
uncleaned filter or improper maintenance will void 
the warranty on the projector  .
IMPORTANT!
Clean the Filter Regularly!!
Filter warning icon (red) appears on the screen 
when the projector detects filter clogging.
Top Control
WARNING FILTER
indicator
Safety Instructions 
						

							7
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in 
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the 
horizontal plane. When installing the projector in upwardly inclined position, install the projector bottom side up.
Installing the Projector in Proper Directions
✔Note:	 •	When	the	image	is	top/bottom	and	left/right	reversed,	set	the	ceiling	function	to	“On.”	(p.	45)
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not tilt the projector more than 
10 degrees from side to side. 
Do not put the projector on either 
side to project an image. 
10
10
10 10
10 10
In upward projection, do 
not tilt the projector over 10 
degrees right and left.
In downward projection, do 
not tilt the projector over 10 
degrees right and left.
For ceiling mounting, you need the ceiling mount kit designed for this 
projector. When not mounted properly, the projector may fall, causing 
hazards or injury. For details, consult your dealer.  The warranty on 
this projector does not cover any damage caused by use of any non-
recommended ceiling mount kit or installation of the ceiling mount kit in an 
improper location.
CAUTION ON CEILING MOUNTING
Safety Instructions 
						

							8
Use the hand grip when moving the projector.
Replace the lens cap and retract the adjustable feet to 
prevent damage to the lens and cabinet when carrying. 
When the projector is not in use for an extended period, put 
it into a suitable case to protect the projector.
 
CAUTION IN CARRyING OR 
TRANSPORTING THE PROJECTOR
–  Do not drop or bump the projector, other wise damages 
or malfunctions may result.
–  When  carr ying  the  projector,  use  a  suitable  carr ying 
case.
–  Do  not  transport  the  projector  by  courier  or  any  other 
transport  service  in  an  unsuitable  transport  case. This 
may  cause  damage  to  the  projector.  For  information 
about  transporting  the  projector  by  courier  or  any  other 
transport service, consult your dealer.
–  Do  not  put  the  projector  in  a  case  before  it  is  cooled 
enough.
Cautions in Handling the Projector
Do not hold the lens when lifting or moving the projector. 
Doing so may cause damage to the lens and the projector. 
Care must be taken when handling the projector; do not 
drop, bump, subject it to strong forces, or put other things 
on the cabinet.
Do not hold the lens and the peripheral part.
CAUTION
Projection lens is a motorized lens. Please note the 
followings when using the projector.
●  Do not touch the lens while it is moving as this 
could cause injury to the fingers.
●  Never allow children to touch the lens.
Moving the Projector
Safety Instructions 
						

							9
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the 
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus 
A S A. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, 
ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available 
from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it 
should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.
  WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET 
OUTLET  .
The Wires in this mains lead are coloured in accordance with the following code:
 Green-and-yellow ············ Earth
  Blue ·················\
················ Neutral\
  Brown ··················\
············ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying 
the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E 
or by the safety earth symbol 
 or coloured green or green-and-yellow.
The  wire  which  is  coloured  blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
  WARNING: THIS APPARATUS MUST BE EARTHED  .
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Under writers Laboratories 
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug 
will fit into the power outlet. Do not try to defeat this safety feature.  Should you be unable to insert 
the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASIL y ACCESSIBLE .
AC Power Cord Requirement
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy an\
d, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
– Reorient or relocate the receiving  antenna. 
–  Increase the separation between the equipment and receiver. 
–  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
–  Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpa\
rt B of Part 15 of FCC Rules. 
Do not make any changes or modifications to the equipment unless other wise specified in the instructions. If such changes 
or modifications should be made, you could be required to stop operation of the equipment.
Model Number(s)     : 
LC-SXG400, LC-SXG400L 
Trade Name    : EIKI 
Responsible party     : 
EIKI International, Inc. 
Address    : 
30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A.
Telephone No.    : 800-242-3454 (949-457-0200)
Compliance 
						

							10
Part Names and Functions
Bottom Back
q	Filter
w	 Speaker
e  Lens Release Button
r	 Top Controls and Indicators
t  Maintenance Cover
  WARNING:  FOR  MAINTENANCE  USE   
  ONLy . DO NOT OPEN .
y	 Lens Cap (for LC-SXG400)
!7
!4!6!5
!2
!3
 CAUTION
Hot air is exhausted from the exhaust vent.  
Do not put heat-sensitive objects near this 
side.
u
e
rt
y
Front
!0o
qw
i✽
o
!1	 Infrared Remote Receiver (Back)
!2  Terminals and Connectors
!3  Lamp Cover
!4  Power Cord Connector
!5  Optional Parts Attachment
!6  Air Intake Vent
!7	 Hand Grip
 CAUTION
Do not turn on the projector with the lens 
cap attached. High temperature from light 
beam may damage the lens cap and result 
in fire hazard.
u  Infrared Remote Receiver (Front)
i  Projection Lens (for LC-SXG400)
o  Adjustable Feet
!0  Exhaust Vent
✽	 Kensington Security Slot
  This slot is for a Kensington lock used to deter 
theft of the projector.
  *Kensington is a registered trademark of ACCO Brand  
  Corporation.
!1