Eiki Projector Lc Se10 User Manual

							31
Computer Input
Press the Point Left/Right but-
ton to adjust value.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point Down button to move the red frame pointer to
the item that you want to adjust, and then press the SELECT
button.  The level of each item is displayed.  Adjust each level by
pressing the Point Left/Right button.
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Image Adjust Menu
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast.  (From 0 to 63.)
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter.  (From 0 to 63.)
Contrast
Brightness
Press the Point Left/Right  button to obtain better balance of contrast.
(From 0 to 15.)
Gamma
Image Level Menu
Move the red frame pointer to
any of Image 1 to 4 where you
want to set  and then press
the SELECT button.
Store icon
Press the SELECT button at
this icon to store the adjust-
ment.
Image Adjust Menu icon
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone.  (From 0 to 63.)
White balance (Red)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone.  (From 0 to 63.)
White balance (Green)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone.  (From 0 to 63.)
White balance (Blue)
Selected Image level
Press the Point Left button or the Point Right  button for Color temp.
level that you want to select. (XLow, Low, Mid, or High) 
Color temp.
Press the Point Left button to soften the image and the Point Right
button to sharpen the image.  (From 0 to 15.)
Sharpness
Image Level Adjustment
Resets all adjustment to their previous levels.
Reset
Store
Closes the Image Adjust Menu.
Quit
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SELECT button.  The Image
Level Menu will appear.  Move the red frame pointer to the Image 1
to 4 where you want to set and then press the SELECT button. 
						

							32
Computer Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Screen Menu icon.
When the Digital zoom + is selected, the On-Screen Menu disappears
and the message “D. Zoom +” is displayed.  Press the SELECT
button to expand the image size.  And press the Point
Up/Down/Left/Right button to pan the image.  The Panning function
can work only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM 
button on the remote control.  
1
To cancel the Digital Zoom +/– mode, press any button except the
D.ZOOM 
/, SELECT, R-CLICK, and Point button.
Move the red frame to the
function and press the SELECT
button.
Press the Point Down button and move the red frame pointer to
the function that you want to select and then press the SELECT
button.2
Wide
Digital zoom +
NOTE
This Screen Menu cannot be operated when “720p
(HDTV)”, “1035i (HDTV)”, or “1080i (HDTV)” is
selected in the PC System Menu  (p26).
The True and Digital zoom +/– cannot be selected
when “480i”, “575i”, “480p”, or “575p” is selected
in the PC System Menu  (p26).
This projector cannot display any resolution higher
than 1280 X 1024.  If your computer’s screen
resolution is higher than 1280 X 1024, reset the
resolution to the lower before connecting to the
projector.
The image data in other than SVGA (800 x 600) is
modified to fit the screen size in initial mode.
The panning function may not operate properly if the
computer system prepared in the PC Adjust Menu is
used.
Provides image to fit screen size.
Normal
True
Screen Menu
Screen Menu icon
When the Digital zoom – is selected, the On-Screen Menu disappears
and the message “D. Zoom –” is displayed.  Press the SELECT button
to compress the image size. 
A projected image can be also compressed by pressing the D.ZOOM
button on the remote control.  
Digital zoom –
Provides image in its original size.  When the original image size is
larger than the screen size (800 x 600), this projector enters “Digital
zoom +” mode automatically. 
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly.  This function can be used for providing a
squeezed video signal at 16 : 9.
Screen Size Adjustment 
						

							33
Video Input
Choose Video by pressing the INPUT button on the top control or the
VIDEO button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.
Press the Point Down button to move the red arrow pointer to
Video and then press the SELECT button.  The Source Select
Menu will appear. 
1
2
Move the pointer to
Video and press the
SELECT button.
VIDEO
Move the pointer to the source that you want to select
and press the SELECT button.
Source Select Menu (VIDEO)
Input Menu
Move the pointer to the source that you want to select and then
press the SELECT button.3
When selecting Auto, the projector automatically detects
incoming video signal, and adjusts itself to optimize its
performance. The projector selects connection in the
following order:
1st Y, Pb/Cb, Pr/Cr
2nd S-Video
3rd Video
The Y, Pb/Cb, Pr/Cr jacks has priority over the S-VIDEO
jack under the condition of connecting both the Y, Pb/Cb,
Pr/Cr jacks and the S-VIDEO jack.
The S-VIDEO jack has priority over the VIDEO jack under
the condition of connecting both the S-VIDEO jack and
the VIDEO jack.Auto
When video input signal is connected to the VIDEO jack,
select Video.Video
When video input signal is connected to the S-VIDEO
jack, select S-Video.S-Video
INPUT button
Video
Computer 2
Computer 1
VIDEO button
Video
When Monitor out is selected at the Terminal item
in the Setting Menu, Computer 2 is not displayed.
See 
“Terminal” item on page 40. 
✽
✽
When Monitor out is selected at the Terminal item in the
Setting Menu, Computer 2 is not displayed.See“Terminal” item on page 40. 
✽
Input Source Selection {Video, S-Video, (Y, Pb/Cb, Pr/Cr)}
Direct Operation
Menu Operation
NOTE
See “Computer Input” on page 25 for a signal compatible with HDCP.
Y, Pb/Cb, Pr/Cr
When video input signal is connected to the Y, Pb/Cb,
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. 
						

							34
Video Input
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.1
Press the Point Down button to move the red arrow pointer to
Computer 2 (Only the Computer 1 is displayed when Monitor
out is selected in the Setting Menu.), and then press the
SELECT button.  The Source Select Menu will appear.   2
Move the pointer to the correct input source and then press the
SELECT button.3
Move the pointer (red arrow)
to Computer 2 and press the
SELECT button.
Computer
2
Move the pointer to
Component or RGB (Scart)
and press the SELECT but-
ton.
Source Select Menu
Input Menu
Input Menu icon
Computer 1
Video
Computer 2
COMPUTER 2 button
Computer 2
INPUT button
Computer 2 is not displayed when the COMPUTER IN
2/MONITOR OUT terminal is used as Monitor out.
See “Terminal” item on page 40. 
✽
✽
✽
Input Source Selection (RGB Scart 21-Pin)
Direct Operation
Menu Operation
When the input source is coming from video
equipment connected to the COMPUTER IN
2/MONITOR OUT terminal with a Scart-VGA Cable,
select RGB (Scart). RGB (Scart)
NOTE
Scart-VGA Cable is optionally supplied.  See page 55 for order.
Choose Computer 2 by pressing the INPUT button on the top control
or press the COMPUTER 2 button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below. 
						

							35
Video Input
AV System Menu (Video or S-Video)
AV System Menu (Component)
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the AV System Menu icon.
Press the Point Down button to move the red arrow pointer to
the system that you want to select and then press the SELECT
button.
1
2
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to a system
and press the SELECT button.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
Auto
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button. AV System Menu icon
This box indicates the system
being selected.
Video System Selection
NOTE
The AV System Menu cannot be selected when selecting RGB(Scart). 
						

							36
Video Input
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.1
2Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Move the red frame pointer to a level
and press the SELECT button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
User preset image in the Image Adjust Menu (p37, 38).
IMAGE 1~4
Image Select
Menu icon
Select an image level among Standard, Cinema, Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the top
control or on the remote control.
Normal picture level preset on this projector.  
Standard
Picture level adjusted for the picture with fine tone.
Cinema
User preset image in the Image Adjust Menu (p37, 38).
IMAGE 1~4
IMAGE button
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Image Level Selection 
Direct Operation
Menu Operation 
						

							37
Video Input
Press the Point Left/Right but-
ton to adjust value.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point Down button to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button.  The level of each item is displayed.  Adjust each level by
pressing the Point Left/Right button.
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Image Adjust Menu
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast.  (From 0 to 63.)
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter.  (From 0 to 63.)
Contrast
Brightness
Press the Point Left/Right button to obtain better balance of contrast.
(From 0 to 15.)
Gamma
Press the SELECT button at
this icon to display other items.
Image Adjust Menu icon
Press the Point Left button to lighten color and the Point Right button
to deepen color.  (From 0 to 63.)
Press the Point Left/Right button to obtain proper color.  (From 0 to
63.)
Color
Tint
Press the Point Left button to soften the image and the Point Right
button to sharpen the image.  (From 0 to 15.)
Sharpness
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone.  (From 0 to 63.)
White balance (Red)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone.  (From 0 to 63.)
White balance (Green)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone.  (From 0 to 63.)
White balance (Blue)
Press the SELECT button at
this icon to store the value.
Press the SELECT button at
this icon to display previous
items.
NOTE
The Tint cannot be adjusted when the video system
is PAL, SECAM, PAL-M, or PAL-N.
Progressive cannot be selected when 480p, 575p,
720p, 1035i, or 1080i  is selected. 
Image Level Adjustment
Press the Point Left/Right button for Color temp. level that you want
to select. (XLow, Low, Mid, or High) 
Color temp.
Interlace video signal can be displayed in a progressive picture.
Off ····Not activated.
L1  ····Select “L1” for an active picture.
L2  ····Select “L2” for a still picture.
Progressive 
						

							38
Video Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Screen Menu icon.
Press the Point Down button and move the red frame pointer to
the function that you want to select and then press the SELECT
button.
1
2
Move the red frame to a function and
press the SELECT button.
Screen Menu
Screen Menu icon
Provides image at a wide screen ratio of 16 : 9.
Wide
Provides image at a normal video aspect ratio of 4 : 3.
Normal
To store the adjustment data, move the red frame pointer to the Store
icon and press the SELECT button.  The Image Level Menu will
appear.  Move the red frame pointer to the Image Level 1 to 4 and
then press the SELECT button.Image Level Menu
Move the red frame pointer
to an image icon to be set
and then press the SELECT
button.
Store icon
Resets all adjustment to their previous figure.
Reset
Store
Closes the Image Adjust Menu.
Quit
Screen Size Adjustment
NOTE
Screen Menu cannot be operated when “720p”, “1035i”, or “1080i” is
selected in the AV System Menu (p35). 
						

							39
Setting
Keystone
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Display
This function decides whether to display On-Screen Displays.
On ····shows all the On-Screen Displays.
Off ····does not show On-Screen Displays except;
On-Screen Menu 
“Power off?” message 
 P-Timer 
“No signal” message
”Wait a moment!” message
Set the red frame
pointer to the item
and press the
SELECT button.Press the Point Down button to move the red frame pointer to
the item that you want to set and then press the 
SELECT
button.  The Setting dialog box appears.
Blue back
When this function is “On,” the projector produces a blue image
while input signal is not detected. 
When pressing the SELECT
button at Language, the
Language Menu appears.
Setting Menu (Language)
Setting Menu icon
This function corrects distortion of a projected image.  Select either
Store or Reset with the Point Left/Right button, and then press the
Select button.
Store ····stores the keystone adjustment even if the AC power
cord is disconnected.
Reset ····resets the keystone adjustment when the AC power cord
is disconnected.
When a SELECT button is pressed, the mode changes to keystone
adjustment mode. Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT and SELECT buttons.
Refer to Keystone  Adjustment on pages 20 and 21.
Setting
When pressing the SELECT
button at Auto set up, the
Auto set up Menu appears. Move the pointer to item
and then press POINT
LEFT/RIGHT button(s).
Auto set up
Select Auto focus, Auto
keystone or Auto PC
Adjustments with the Point
Up/Down button.
Then select setting
position with the Point
Left/Right button.
Auto set up
The menu is to set up the details on Auto Set Up operation.
Select desired operation through the following alternatives for each
item to be adjusted. 
Auto Focus Adjustment (Off / Quick / Detail)
Auto Keystone Adjustment (Off / Quick / Detail)
Auto PC Adjustment (Off or On)
On Quick-Speed of the adjustment is prior to its accuracy. 
On Detail-Accuracy of the adjustment is prior to its speed.
It is not allowed to set all the items to OFF.
Refer to Auto Set Up function on page 21. 
						

							40
Setting
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the
projector can be used as computer input or monitor output by
switching Terminal with the Point Left/Right button.  
To use the terminal as computer input or RGB Scart 21-Pin Video
input, select Computer 2. To use the terminal as monitor out, select
Monitor out.
Terminal cannot be switched into Monitor out after selecting
Computer 2. In this case, select other input source such as Computer
1 or Video, and you will select Terminal. 
Standby mode
Ceiling 
Rear  CeilingWhen this function is “On,” the picture is top/bottom and left/right
reversed.  This function is used to project the image from a ceiling
mounting the  projector.
Rear
When this function is “On,” the picture is left/right reversed.  This
function is used to project the image to a rear projection screen.
Press the SELECT button at this
icon to display previous items.
Standby mode
This function is available when using Multi Card Director optionally
supplied, and it reduces standby energy when selecting Eco.
Eco···· reduces standby energy.
Normal···· consumes normal standby energy.
Capture
This function is used to capture the image being projected and use it
for a starting-up display or interval of presentations.  After capturing
the projected image, go to the Logo function and set it as “User”.
Then the captured image will be displayed when turning on the
projector next time or pressing the NO SHOW button. (p22) 
To capture the image, select [Yes].  To cancel the Capture function,
select [No].  
Before capturing an image, select Standard in the Image Select Menu
to capture a proper image.  (See page 30, 36.)
A signal from a computer can be captured up to XGA(1024 x 768).  A
signal from video equipment can be captured except for 720p, 1035i,
and 1080i.  When capturing the image that has been adjusted by the
Keystone function, the adjustment data is automatically reset and the
projector captures an image without keystone adjustment. 
Select [Yes] to
capture the
projected image. 
Select [Yes] to
stop capturing.  
CaptureLogo
This function decides what to be displayed when starting up.
User···· the image you captured
Default····the factory-set logo
Off ···· count-down only
Press the SELECT button at this
icon to display other items.
Move the pointer to item
and then press POINT
LEFT/RIGHT button(s).