Eiki Projector Lc Sd15 User Manual
Have a look at the manual Eiki Projector Lc Sd15 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix The CE Mark is a Directive conformity mark of the European Community (EC). Some displays are not seen–Check the Display item. (See page 38.) during the operation. PIN code dialog box appears at start-up.–PIN code lock is being set. Input a PIN code (1234 or numbers you have set). (See pages 17 and 43.) The Remote Control does not work.–Check the batteries. –Make sure there is no obstruction between the projector and remote control. –Make sure you are not too far from the projector when using the remote control. The maximum operating range is 16.4’ (5m). –Make sure the code of the remote control is conformed to that of the projector. (See page 42.) –Unlock the Key lock for the remote control in the Setting Menu. (See page 42.) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center.Give the model number and explain about the problem. We will advise you how to obtain service. Appendix
52 Appendix Menu Tree System (1)Mode 1Mode 2SVGA 1- - - - Auto PC adj.Fine sync.Total dotsHorizontalVerticalCurrent mode ClampDisplay area Display area - HDisplay area - VFull screenResetMode free Store Quit Dynamic RealBlackboard(Green)Image 1Image 2Image 3 Image AdjustContrastBrightnessColor temp. RedGreenBlueGamma Store Quit Digital zoom – NormalTrueWideDigital zoom + 0 - 31 On / Off 0 - 630 - 63 Computer Input PC Adjust 640 x 480720 x 400800 x 6001024 x 7681152 x 8641280 x 10241400 x 1050 Mode 3Mode 4Mode 5QuitMode 1 Image Select High 0 - 630 - 630 - 630 - 15 Image 1Image 2Image 3Image 4 Screen Quit Quit Yes / No Quit ✽Systems displayed in the System Menu vary depending the input signal. Mid ResetYes / No LowXLow Computer Input / Video Input Image 4 Sound VolumeMuteQuitOn / OffSound0 - 63 InputComputer Go to System(3) ✽N/A - - -not applicable RGBGo to System(1) Go to System(2) N/A Standard Video Go to System(3) RGB( Scart ) Component S-Video Quit H-sync freq.V-sync freq.Quit Mode 1Mode 2 Mode 2Mode 3Mode 4Mode 5 Adj. 0 - 127
53 Appendix AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N Video Input Auto1080i1035i720p575p480p575i480i Dynamic CinemaBlackboard(Green)Image 1Image 2Image 3 Quit WideNormal 0 - 630 - 630 - 630 - 63 Off Setting Image Select System (2) System (3) Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore GammaProgressive 0 - 630 - 630 - 630 - 150 - 15 Image 1Image 2Image 3Image 4 Screen Yes / No Quit HighColor temp.MidLowXLow L1L2 Image 4 FilmOn/ Off LanguageSettingEnglishGermanFrenchItalianSpanishPortugueseDutchSwedish ChineseKoreanJapanese Store / ResetOn / OffOn / Off On / OffOn / OffOff On / OffNormal 0 - 15 Yes / No KeystoneBlue backDisplay Logo CeilingRearPower management On startLamp mode Dim modeCode 1 Quit Russian Yes / NoCapture ReadyShut down Auto Yes / NoLamp counter reset OffKey lock ProjectorRemote Control User Timer(1-30 Min)Quit QuitPIN code lock entryPIN code lock On1On2PIN code changeQuit OffLogo PIN code lock OnPIN code changeQuit Eco Factory default L1 / L2Fan Quit Standard Logo PIN codelock e n t r y Off Appendix OffDefault Remote controlCode 2 Adj.
54 Appendix Check the indicators for projector condition. • • • emits green light• • • emits red light• • • off• • • blinks green ✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator emits yellow light. In this case, replace the projection lamp with a new one promptly. Reset the Lamp replacement counter after replacing the lamp. See pages 48 and 49. The projector is off. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator turns to steady red and the projector can be turned on. (The WARNING indicator keeps blinking.) Check and clean the air filters. Projector Condition The projector is ready to be turned on with the POWER ON-OFF button. POWERred/green Indicators LAMP REPLACE yellow WARNING red The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ✽ ✽ ✽ ✽ The projector is operating normally. The projector is in Power management mode. ✽ ✽ The projector has been cooled down enough and the inside temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filters. Indicators and Projector Condition • • • blinks red
55 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the below mentioned V, H-Frequency and less than 100 MHz of Dot Clock. ON-SCREEN DISPLAYRESOLUTIONH-Freq. (kHz)V-Freq. (Hz) VGA 1640 x 48031.4759.88 VGA 2720 x 40031.4770.09 VGA 3640 x 40031.4770.09 VGA 4640 x 48037.8674.38 VGA 5640 x 48037.8672.81 VGA 6640 x 48037.5075.00 MAC LC13640 x 48034.9766.60 MAC 13640 x 48035.0066.67 MAC 16832 x 62449.7274.55 MAC 191024 x 76860.2475.08 MAC 211152 x 87068.6875.06 SVGA 1800 x 60035.15656.25 SVGA 2800 x 60037.8860.32 SVGA 3800 x 60046.87575.00 SVGA 4800 x 60053.67485.06 SVGA 5800 x 60048.0872.19 SVGA 6800 x 60037.9061.03 SVGA 7800 x 60034.5055.38 SVGA 8800 x 60038.0060.51 SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 ON-SCREEN DISPLAYRESOLUTIONH-Freq. (kHz)V-Freq. (Hz) XGA 101024 x 768 XGA 111024 x 768 XGA 121024 x 768 XGA 131024 x 768 62.0477.07 XGA 141024 x 768 61.0075.70 XGA 151024 x 768 35.52286.96 (Interlace) 46.9058.20 XGA 81024 x 768 47.0058.30 XGA 91024 x 768 58.0372.00 SXGA 11152 x 864 63.4879.35 36.0087.17 (Interlace) 64.2070.40 SXGA 111152 x 900 SXGA 131280 x 1024 SXGA 141280 x 1024 61.2065.20 50.0086.00 (Interlace) 720p (HDTV)–––––––– 50.0094.00 (Interlace) 45.0060.00 XGA 11024 x 768 XGA 41024 x 768 48.3660.00 XGA 61024 x 768 XGA 71024 x 768 56.47670.07 48.5060.02 44.0054.58 SXGA 171152 x 900 SXGA 181280 x 1024 61.8566.00 46.4386.70 (Interlace) XGA 51024 x 76860.3174.92 VGA 7640 x 48043.26985.00 575i––––––––15.62550 (Interlace)480i––––––––15.73460 (Interlace) 1080i (HDTV)––––––––33.7560.00 (Interlace)1035i (HDTV)––––––––33.7560.00 (Interlace)SVGA 10800 x 60032.7051.09 1080i (HDTV)––––––––28.12550.00 (Interlace) 480p––––––––31.4759.88 575p––––––––31.2550.00 XGA 21024 x 76868.67784.997 XGA 31024 x 76860.02375.03 Appendix
56 Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 10.63 x 3.07 x 7.48 (270mm x 78mm x 190mm) (not including Adjustable Feet) Net Weight 4.8lbs (2.2 kg) Feet Adjustment 0˚ to 7.0˚ Panel Resolution LCD Panel System 0.5 TFT Active Matrix type, 3 panels Panel Resolution 800 x 600 dots Number of Pixels 1,440,000 (800 x 600 x 3 panels) Signal Compatibility Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N High Definition TV Signal480i, 480p, 575i, 575p, 720p, 1035i, and 1080i Scanning FrequencyH-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 34 to 200 Projection Lens F 1.6 ~ 1.8 lens with f 18.3 mm ~ 21.9 mm with manual zoom and focus Throw Distance 4.3 ~ 21.2 (1.3m ~ 6.5m) Projection Lamp 160W Interface Video Input Jack RCA Type x 1 Audio Input Jack Mini Jack (Stereo) x 1 Monitor Out Terminal Analog RGB (Mini D-sub 15 pin) x 1 Computer/S-Video/Component Input TerminalAnalog RGB (Mini D-sub 15 pin) x 1 Service Port Connector Mini DIN 8 pin x 1 Audio Output Jack Mini Jack (stereo) x 1 (Variable) Audio Internal Audio Amp 0.8 W RMS Built-in Speaker 1 speaker, ø1.3 (32mm) Power Voltage and Power Consumption AC 100 ~ 120 V (3.6 A Max. Ampere), 50/60 Hz (The U.S.A and Canada) AC 200 ~ 240 V (1.8 A Max. Ampere), 50/60 Hz (Continental Europe) Operating Environment Operating Temperature 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) Storage Temperature 14 ˚F ~ 140 ˚F (-10˚C ~ 60 ˚C) Remote Control Battery AA or LR6 1.5V ALKALINE TYPE x 2 Operating Range 16.4’ (5m) / ±30˚ Dimensions 1.9”(W) x 0.87”(H) x 5.7”(D) (49mm x 22mm x 145.3mm) Net Weight 3.53 oz (100 g) (including batteries)
57 Appendix Model No. COMPONENT-VGA Cable : AH-98771 (POA-CA-COMPVGA) SCART-VGA Cable : AH-98881 (POA-CA-SCART) S-Video-VGA Cable : AH-98661 (POA-CA-VGAS) The parts listed below are optionally available. When ordering those parts, give the item name and Model No. to the sales dealer. Optional Parts Accessories Owners Manual AC Power Cord Remote Control and Batteries VGA Cable Lens Cover with String PIN Code Label ●The specifications are subject to change without notice. ●LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. ●The On-Screen Menu and figures in this manual may differ slightly from the product. Appendix
58 Appendix Terminal : Mini DIN 8-PIN 12345876 SERVICE PORT CONNECTOR COMPUTER INPUT/S-VIDEO INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : Mini D-sub 15 pin 512341096781514131112 Configurations of Terminals Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 ----- Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) ----- Ground / ----- Vert. sync. ----- 9 13 10 12 11 14 15 R X D ----- ----- GND RTS/CTS T X D GND GND Serial 1 2 3 4 5 6 7 8
59 Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the numbers and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid. Put on the label below (supplied) in a prominent place of the projectors body while it is locked with a PIN code. While the projector is locked with the PIN code ... PIN Code Lock No. Logo PIN Code Lock No. Appendix
A-key to better communications U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern Europe EIKI CZECH spol. s.r.o. Umelecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024 +42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected]ˆ Japan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www.eiki.com Printed in China Part No. 610 323 5387 (1AA6P1P4934-- KB6B)© 2005 Eiki International, Inc.